Water reclamation and chemicals recovery from a novel cyanide-free copper plating bath using electrodialysis membrane process
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract One of the industrial concerns is to change procedures into sustainable and cleaner processes. In electroplating, researches have been developed to replace toxic materials for safer alternatives. Cyanide salts are toxic compounds used as complexing agents in alkaline baths. This work focused in a cyanide-free copper alkaline bath developed for copper coating onto zinc alloys. Electrodialysis was evaluated to obtain a concentrated solution from a model rinsing water and simultaneously to treat the effluent for further reuse. Membrane properties after electrodialysis were analyzed, before and after cleaning procedures. Deposition tests were performed using electrolytes containing the recycled inputs and the coatings were analyzed. As results, a solution 5 to 6 times more concentrated than the initial one was obtained. The average demineralization was 90% and the percent extraction of ions was higher than 80%. Interactions between the organic acid and the exchange groups may affect membrane properties. Nevertheless, FTIR analyses and the applied cleaning procedures showed that bonds between phosphorus and quaternary amine may be reversible. Both cleaning procedures presented similar performance and partially restored the membrane properties. The concentrate could be added to the copper bath to compensate eventual drag-out losses without affecting the quality of the coatings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mikhaylin, S., & Bazinet, L. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.12.006 · Cited by 429 · cited 1×
“Generally, the alkaline cleaning is more suitable for cleaning anion-exchange membranes [20].”
Background
Cited by
Electrodialysis desalination for water and wastewater: A review
Al-Amshawee, S., Yunus, M. Y. B. M., Azoddein, A. A. M., Hassell, D. G., Dakhil, I. H., & Hasan, H. A. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122231 · Cited by 964
Gurreri, L., Tamburini, A., Cipollina, A., & Micale, G. (2020) · Membranes · doi:10.3390/membranes10070146 · Cited by 492
Electrodialysis for metal removal and recovery: A review
Arana Juve, J.-M., Christensen, F. M. S., Wang, Y., & Wei, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134857 · Cited by 338
Min, K. J., Kim, J. H., & Park, K. Y. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143762 · Cited by 72
Metadata
- Authors
- Scarazzato, T., Panossian, Z., Tenório, J. A. S., Pérez-Herranz, V., & Espinosa, D. C. R.
- Venue
- Desalination
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 436
- Pages
- 114-124
- ISSN
- 0011-9164 (ISSN-L)
- OpenAlex
- W2789963737
- Cited by
- 42
- References
- 1
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.