The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
A Review of Post-combustion CO2 Capture Technologies from Coal-fired Power Plants
Open accessAbstract
Reducing CO2 emissions has become a worldwide research topic. Of all the sources of CO2 emissions, power plants burning fossil fuels, especially coals, account for a very large portion. For CO2 capture from existing coal-fired power plants, post-combustion technology is thus far considered the most viable method due to its “end-of-pipe” characteristic. Chemical absorption or scrubbing process is currently the technology most likely to be implemented in the near future but rather energy-intensive. Membrane-based CO2 separation process in recent years appears to be a competitive substitution for conventional chemical absorption technology. This paper reviews the basic process designs of chemical absorption and membrane-based separation processes for CO2 capture, as well as corresponding optimization methods including optimizing operational parameters, process modifications, membrane module types and so forth. In addition, some energetic and economic estimates from other researchers for these two CO2 capture technologies are summarized. It is found that membrane-based separation process does not possess obvious advantage over MEA-based chemical absorption process at the typical 90% CO2 capture degree in terms of both energy consumption and cost. Therefore, various optimization methods have not changed the fact that CCS technology will lay more burdens on power plants unless they can get enough allowances from government. In recent years, hybrid system with the target of utilizing more than one single capture technology seems to be new direction from the perspective of capture process design. However, it still needs to be further investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Correlation of separation factor versus permeability for polymeric membranes
Robeson, L. M. (1991) · Journal of Membrane Science · doi:10.1016/0376-7388(91)80060-j · Cited by 3,465
Basic Principles of Membrane Technology
Mulder, M. (1996) · Springer eBooks · doi:10.1007/978-94-009-1766-8 · Cited by 2,999
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Rao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Power plant post-combustion carbon dioxide capture: An opportunity for membranes
Merkel, T. C., Lin, H., Wei, X., & Baker, R. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.10.041 · Cited by 1,657
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Post-combustion CO2 capture with chemical absorption: A state-of-the-art review
Wang, M., Lawal, A., Stephenson, P., Sidders, J., & Ramshaw, C. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.11.005 · Cited by 1,458
Abu-Zahra, M. R. M., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00032-1 · Cited by 857
Powell, C. E., & Qiao, G. G. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.12.062 · Cited by 815
Abu-Zahra, M. R. M., Schneiders, L. H. J., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(06)00007-7 · Cited by 764
Use of monoethanolamine (MEA) for CO 2 capture in a global scenario: Consequences and alternatives
Luis, P. (2016) · Desalination · doi:10.1016/j.desal.2015.08.004 · Cited by 639
Singh, D., Croiset, E., Douglas, P. L., & Douglas, M. A. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00040-2 · Cited by 538
Peer Reviewed: What Future for Carbon Capture and Sequestration?
Herzog, H. J. (2001) · Environmental Science & Technology · doi:10.1021/es012307j · Cited by 533
Reducing the Cost of CO2 Capture from Flue Gases Using Membrane Technology
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070541y · Cited by 256
Cryogenic CO2 capture in natural gas
Hart, A., & Gnanendran, N. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.092 · Cited by 240
A parametric study of CO2/N2 gas separation membrane processes for post-combustion capture
Zhao, L., Riensche, E., Menzer, R., Blum, L., & Stolten, D. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.07.058 · Cited by 236
Self-citationA feasibility study of CO2 capture from flue gas by a facilitated transport membrane
Hussain, A., & Hägg, M.-B. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.11.035 · Cited by 234
Nanostructured membrane material designed for carbon dioxide separation
Yave, W., Car, A., & Peinemann, K.-V. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.12.019 · Cited by 230
Identifying Cost-Effective CO2 Control Levels for Amine-Based CO2 Capture Systems
Rao, A. B., & Rubin, E. S. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050603p · Cited by 210
Process modifications for solvent-based post-combustion CO2 capture
Le Moullec, Y., Neveux, T., Al Azki, A., Chikukwa, A., & Hoff, K. A. (2014) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2014.09.024 · Cited by 200
Harlick, P. J. E., & Tezel, F. H. (2003) · Separation and Purification Technology · doi:10.1016/s1383-5866(02)00078-3 · Cited by 194
Zhao, L., Riensche, E., Blum, L., & Stolten, D. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.003 · Cited by 193
Self-citationHybrid membrane cryogenic process for post-combustion CO2 capture
Belaissaoui, B., Moullec, Y. L., Willson, D., & Favre, É. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.05.029 · Cited by 152
Zhai, H., & Rubin, E. S. (2013) · Environmental Science & Technology · doi:10.1021/es3050604 · Cited by 139
Optimised integration of post-combustion CO2 capture process in greenfield power plants
Pfaff, I., Oexmann, J., & Kather, A. (2010) · Energy · doi:10.1016/j.energy.2010.06.004 · Cited by 107
Post‐combustion CO 2 capture: chemical absorption processes in coal‐fired steam power plants
Oexmann, J., Kather, A., Linnenberg, S., & Liebenthal, U. (2012) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1273 · Cited by 106
Low, B. T., Zhao, L., Merkel, T. C., Weber, M., & Stolten, D. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.12.014 · Cited by 105
Self-citationCost competitive membrane—cryogenic post-combustion carbon capture
Scholes, C. A., Ho, M. T., Wiley, D. E., Stevens, G. W., & Kentish, S. E. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.05.017 · Cited by 93
Designing a supercritical steam cycle to integrate the energy requirements of CO2 amine scrubbing
Romeo, L. M., Espatolero, S., & Bolea, I. (2008) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2008.03.002 · Cited by 92
Cifre, P. G., Brechtel, K., Hoch, S., García, H., Asprion, N., Hasse, H., & Scheffknecht, G. (2009) · Fuel · doi:10.1016/j.fuel.2009.01.031 · Cited by 90
Hybrid Membrane-absorption CO2 Capture Process
Freeman, B. C., Hao, P., Baker, R. W., Kniep, J., Chen, E., Ding, J., Zhang, Y., & Rochelle, G. T. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.065 · Cited by 75
Recent developments on membranes for post-combustion carbon capture
Ramasubramanian, K., & Ho, W. S. W. (2011) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2011.08.002 · Cited by 72
Pebax®/PAN hollow fiber membranes for CO2/CH4 separation
Esposito, E., Clarizia, G., Bernardo, P., Jansen, J. C., Sedláková, Z., Izák, P., Curcio, S., de Cindio, B., & Tasselli, F. (2015) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2015.03.016 · Cited by 63
Part Load Behaviour of Power Plants with a Retrofitted Post-combustion CO2 Capture Process
Roeder, V., & Kather, A. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.07.024 · Cited by 22
Industrial Applications of Membrane Contactors
Pabby, A. K., Rizvi, S. S. H., & Requena, A. M. S. (2015) · CRC Press eBooks · doi:10.1201/b18319-9 · Cited by 15
Cited by
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Madejski, P., Chmiel, K., Subramanian, N., & Kuś, T. (2022) · Energies · doi:10.3390/en15030887 · Cited by 485
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Tapia, J. F. D., Lee, J.-Y., Ooi, R. E. H., Foo, D. C. Y., & Tan, R. R. (2018) · Sustainable Production and Consumption · doi:10.1016/j.spc.2017.10.001 · Cited by 455
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Metadata
- Authors
- Wang, Y., Zhao, L., Otto, A., Robinius, M., & Stolten, D.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 114
- Pages
- 650-665
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W2748165968
- Cited by
- 515
- References
- 37
- FWCI
- 88.26
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.