The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Digital light processing (DLP) 3D-printing technology and photoreactive polymers in fabrication of modified-release tablets
Abstract
In this study, we assessed the feasibility of using digital light processing (DLP) 3D printers (3DP) in fabrication of solid oral dosage forms. The DLP technology uses a digital micromirror device (DMD) that reflects and focuses ultraviolet (UV) light on the surfaces of photoreactive materials that polymerize in a layer-by-layer fashion. Using poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) dimethacrylate (PEGDMA) as photoreactive polymers and theophylline as a model drug, we deployed a DLP printer to fabricate tablets. After optimizing various printing parameters including UV intensity and exposure time, layer thickness, and polymer concentration, we printed various types of tablets with and without perforation. We then assessed the tablets for drug content, mechanical strengths, swellability, weight variation, microscopic features, drug-polymer interactions and drug release profiles. The loading of theophylline was 1%, which was independent of tablet weights. The drug content and weight variation were within the acceptable range, as recommended by the United States Pharmacopeia (USP). Scanning electronic microscopic (SEM) pictures showed tablets with distinct layers and smooth outer surfaces. The spectral scans, obtained using Fourier Transform Infrared Spectroscopy (FTIR), showed no chemical interactions between the drug and polymers. Similarly, drug content determined using a UV spectrophotometer was the same as that determined by a high performance liquid chromatography (UPLC). The extent of drug release increased with the increase in the number of perforations in the tablets. Overall, this study demonstrates that DLP 3DP can be used as a platform for fabricating oral tablets with well-defined shapes and different release profiles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
3D Computational Imaging with Single-Pixel Detectors
Sun, B., Edgar, M., Bowman, R. W., Vittert, L., Welsh, S. S., BOWMAN, A. W., & Padgett, M. J. (2013) · Science · doi:10.1126/science.1234454 · Cited by 914
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang, J., Feng, X., Patil, H., Tiwari, R. V., & Repka, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.049 · Cited by 393
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Photodegradation characteristics of PPCPs in water with UV treatment
Kim, I., & Tanaka, H. (2009) · Environment International · doi:10.1016/j.envint.2009.01.003 · Cited by 337
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Sadia, M., Sośnicka, A., Arafat, B., Isreb, A., Ahmed, W., Kelarakis, A., & Alhnan, M. A. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.050 · Cited by 323
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Kollamaram, G., Croker, D. M., Walker, G. M., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.055 · Cited by 318
Okwuosa, T. C., Stefaniak, D., Arafat, B., Isreb, A., Wan, K.-W., & Alhnan, M. A. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1995-0 · Cited by 294
Synthesis and Characterization of PEG Dimethacrylates and Their Hydrogels
Lin-Gibson, S., Bencherif, S., Cooper, J. A., Wetzel, S. J., Antonucci, J. M., Vogel, B. M., Horkay, F., & Washburn, N. R. (2004) · Biomacromolecules · doi:10.1021/bm0498777 · Cited by 277
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Liu, Q., Li, Q., Xu, S., Zheng, Q., & Cao, X. (2018) · Polymers · doi:10.3390/polym10060664 · Cited by 226
3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1075-3 · Cited by 201
Lim, S. H., Ng, J. Y., & Kang, L. (2017) · Biofabrication · doi:10.1088/1758-5090/9/1/015010 · Cited by 168
Kadry, H., Al-Hilal, T. A., Keshavarz, A. A., Alam, F., Xu, C., Joy, A., & Ahsan, F. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.010 · Cited by 136
Self-citationSabnis, A., Rahimi, M., Chapman, C., & Nguyen, K. T. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32194 · Cited by 126
McAvoy, K., Jones, D. S., & Singh, T. R. R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-017-2298-9 · Cited by 118
Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins
Bloomquist, C. J., Mecham, M. B., Paradzinsky, M., Janusziewicz, R., Warner, S. B., Luft, J. C., Mecham, S. J., Wang, A. Z., & DeSimone, J. M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.03.026 · Cited by 111
Löbenberg, R., Krämer, J., Shah, V. P., Amidon, G. L., & Dressman, J. (2000) · Pharmaceutical Research · doi:10.1023/a:1007529020774 · Cited by 108
Kalakkunnath, S., Kalika, D. S., Lin, H., & Freeman, B. D. (2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20873 · Cited by 73
Porfiryeva, N. N., Nasibullin, S. F., Абдуллина, С. Г., Tukhbatullina, I. K., Moustafine, R. I., & Khutoryanskiy, V. V. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.03.027 · Cited by 63
Mucoadhesive acrylated block copolymers micelles for the delivery of hydrophobic drugs
Eshel-Green, T., & Bianco-Peled, H. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.11.044 · Cited by 57
Yadav, H. K. S., & Shivakumar, H. G. (2012) · ISRN Pharmaceutics · doi:10.5402/2012/763127 · Cited by 51
Gelation and crosslinking characteristics of photopolymerized poly(ethylene glycol) hydrogels
Hwang, J. W., Noh, S. M., Kim, B., & Jung, H. W. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41939 · Cited by 45
Killion, J. A., Geever, L. M., Devine, D. M., Grehan, L., Kennedy, J. E., & Higginbotham, C. L. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6588-7 · Cited by 26
Formulation of Fe3O4/Acrylate Co-Polymer Nanocomposites as Potential Drug Carriers
Phanapavudhikul, P., Shen, S., Ng, W. K., & Tan, R. B. H. (2008) · Drug Delivery · doi:10.1080/10717540801952597 · Cited by 25
Thenrajan, R. S., Palanichamy, S., Tamilvanan, S., Shanmuganathan, S., & Thirupathi, A. (2011) · Europe PMC (PubMed Central) · doi:10.4103/0250-474x.95649 · Cited by 22
Zhang, Z. F., Ma, X., Wang, H., et al. (2018) · Applied Physics A · doi:10.1007/s00339-018-1713-3 · Cited by 22
Kimlinger, M. J., & Martin, R. S. (2018) · Electroanalysis · doi:10.1002/elan.201800367 · Cited by 18
Cited by
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
Digital Light Processing Based Three-dimensional Printing for Medical Applications
Zhang, J., Hu, Q., Wang, S., Tao, J., & Gou, M. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.242 · Cited by 359
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Robles-Martinez, P., Xu, X., Trenfield, S. J., Awad, A., Goyanes, A., Telford, R., Basit, A. W., & Gaisford, S. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11060274 · Cited by 358
Metadata
- Authors
- Kadry, H., Wadnap, S., Xu, C., & Ahsan, F.
- Venue
- European Journal of Pharmaceutical Sciences
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 135
- Pages
- 60-67
- ISSN
- 0928-0987 (ISSN-L)
- OpenAlex
- W2945230098
- Cited by
- 265
- References
- 40
- FWCI
- 12.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.