The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
Open accessAbstract
Abstract Experiments were conducted to enable the simultaneous measurement of electrochemical impedance and collection of hydrogen gas during the corrosion of pure magnesium in NaCl solutions. These results were then assessed along with the attendant specimen mass loss, providing three unique measures of magnesium corrosion for the same specimen. It was determined that analysis of impedance data, while accounting for a physically justified inductive response at low frequencies, enabled the determination of the polarization resistance, RP at the zero frequency limit. The determination of RP, as evaluated herein from electrochemical testing, provided excellent correlation to the mass loss and volume of hydrogen collected. This finding is elaborated in a broader discussion that critically addresses previous studies which have utilized the impedance behavior of magnesium and which claim electrochemical tests may underestimate Mg corrosion when attempting to use a charge transfer resistance at intermediate frequencies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stern, M., & Geaby, A. L. (1957) · Journal of The Electrochemical Society · doi:10.1149/1.2428496 · Cited by 3,876
Principles and prevention of corrosion
Walker, R. (1993) · Materials & Design · doi:10.1016/0261-3069(93)90066-5 · Cited by 2,427
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Principles and prevention of corrosion
Jones, D. A. (1991) · Cited by 2,104
Electrochemical Impedance Spectroscopy
Orazem, M. E., & Tribollet, B. (2008) · Wiley eBooks · doi:10.1002/9780470381588 · Cited by 1,676
Electrochemical Impedance Spectroscopy
(2016) · Encyclopedia of Membranes · doi:10.1007/978-3-662-44324-8_100089 · Cited by 1,580
The anodic dissolution of magnesium in chloride and sulphate solutions
Song, G., Atrens, A., John, D. S., Wu, X., & Nairn, J. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00090-5 · Cited by 890
Kirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
Self-citationMakar, G. L., & Kruger, J. (1993) · International Materials Reviews · doi:10.1179/095066093790326320 · Cited by 803
Determination of corrosion rates by electrochemical DC and AC methods
Lorenz, W. J., & Mansfeld, F. (1981) · Corrosion Science · doi:10.1016/0010-938x(81)90015-9 · Cited by 701
Recording and Analysis of AC Impedance Data for Corrosion Studies
Mansfeld, F. (1981) · Corrosion · doi:10.5006/1.3621688 · Cited by 583
The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions
Baril, G., & Pébère, N. (2001) · Corrosion Science · doi:10.1016/s0010-938x(00)00095-0 · Cited by 474
An Impedance Investigation of the Mechanism of Pure Magnesium Corrosion in Sodium Sulfate Solutions
Baril, G., Galicia, G., Deslouis, C., Pébère, N., Tribollet, B., & Vivier, V. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2401056 · Cited by 418
Evolution of hydrogen at dissolving magnesium surfaces
Frankel, G. S., Samaniego, A., & Birbilis, N. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.01.017 · Cited by 403
Self-citationMeasurement Models for Electrochemical Impedance Spectroscopy: I . Demonstration of Applicability
Agarwal, P., Orazem, M. E., & Garcia‐Rubio, L. H. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069522 · Cited by 382
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
Cao, F., Shi, Z., Hofstetter, J., Uggowitzer, P. J., Song, G., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.05.018 · Cited by 371
Use of impedance measurements for the determination of the instant rate of metal corrosion
Epelboin, I., Keddam, M., & Takenouti, H. (1972) · Journal of Applied Electrochemistry · doi:10.1007/bf00615194 · Cited by 347
Faradaic Impedances: Diffusion Impedance and Reaction Impedance
Epelboin, I., & Keddam, M. (1970) · Journal of The Electrochemical Society · doi:10.1149/1.2407718 · Cited by 340
Physical Interpretation of the Warburg Impedance
Taylor, S. R., & Gileadi, E. (1995) · Corrosion · doi:10.5006/1.3293628 · Cited by 206
Qiao, Z., Shi, Z., Hort, N., Zainal Abidin, N. I., & Atrens, A. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.030 · Cited by 199
Reaction of zero-valent magnesium with water: Potential applications in environmental remediation
Lee, G., & Park, J. (2012) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2012.10.031 · Cited by 35
Cited by
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
Self-citationReview of Recent Developments in the Field of Magnesium Corrosion
Atrens, A., Song, G., Liu, M., Shi, Z., Cao, F., & Dargusch, M. S. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400434 · Cited by 806
On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy
Gomes, M. P., Costa, I., Pébère, N., Rossi, J. L., Tribollet, B., & Vivier, V. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.03.080 · Cited by 306
Comprehensive screening of Mg corrosion inhibitors
Lamaka, S. V., Vaghefinazari, B., Mei, D., Petrauskas, R. P., Höche, D., & Zheludkevich, M. L. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.07.011 · Cited by 299
Mei, D., Lamaka, S. V., Lu, X., & Zheludkevich, M. L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108722 · Cited by 284
Metadata
- Authors
- King, A. D., Birbilis, N., & Scully, J. R.
- Venue
- Electrochimica Acta
- Publisher
- Elsevier BV
- Published
- 2014-03
- Volume
- 121
- Pages
- 394-406
- ISSN
- 0013-4686 (ISSN-L)
- OpenAlex
- W2004401129
- Cited by
- 640
- References
- 21
- FWCI
- 15.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.