Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building

Thermal Environmental Conditions for Human Occupancy

Ashrae, S. (1992) · Medical Entomology and Zoology · Cited by 6,092 · see citing works

United Nations Environment Programme

Miller, N. N. (1987) · Brill | Nijhoff eBooks · doi:10.1163/9789004634169_010 · Cited by 3,715 · see citing works

ASME International Mechanical Engineering Congress and Exposition

(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,636 · see citing works

Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency

Soares, N., Costa, J. J., Gaspar, A. R., & Santos, P. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.12.042 · Cited by 1,063 · see citing works

Use of microencapsulated PCM in concrete walls for energy savings

Cabeza, L. F., Castellón, C., Nogués, M., Medrano, M., Leppers, R., & Zubillaga, O. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.03.030 · Cited by 890 · see citing works

Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)

Zhao, C., Lu, W. J., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 761 · see citing works

Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage

Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715 · see citing works

Phase change materials and thermal energy storage for buildings

de Gracia, Á., & Cabeza, L. F. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.007 · Cited by 696 · see citing works

Experimental study of using PCM in brick constructive solutions for passive cooling

Castell, A., Martorell, I., Medrano, M., Pérez, G., & Cabeza, L. F. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2009.10.022 · Cited by 552 · see citing works

Investigation of the thermal performance of a passive solar test-room with wall latent heat storage

Athienitis, A. K., Liu, C., Hawes, D. W., Banu, D., & Feldman, D. G. (1997) · Building and Environment · doi:10.1016/s0360-1323(97)00009-7 · Cited by 438 · see citing works

Experimental assessment of a phase change material for wall building use

Kuznik, F., & Virgone, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.01.004 · Cited by 436 · see citing works

Verification and validation of EnergyPlus phase change material model for opaque wall assemblies

Tabares-Velasco, P. C., Christensen, C., & Bianchi, M. V. A. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.02.019 · Cited by 425 · see citing works

Effect of double layer phase change material in building roof for year round thermal management

Pasupathy, A., & Velraj, R. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.02.016 · Cited by 334 · see citing works

A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites

Ramakrishnan, S., Sanjayan, J., Wang, X., Alam, M., & Wilson, J. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.019 · Cited by 333 · see citing works

Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season

Ascione, F., Bianco, N. D., Masi, R. F. D., de Rossi, F., & Vanoli, G. P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.045 · Cited by 332 · see citing works

Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation

Kuznik, F., Virgone, J., & Roux, J.-J. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.01.022 · Cited by 322 · see citing works

Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material

Ahmad, M., Bontemps, A., Sallee, H., & Quenard, D. A. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.11.002 · Cited by 254 · see citing works

Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses

Entrop, A. G., Brouwers, H. J. H., & Reinders, A. H. M. E. (2011) · Solar Energy · doi:10.1016/j.solener.2011.02.017 · Cited by 244 · see citing works

Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution

Silva, T., Vicente, R., Soares, N., & Ferreira, V. M. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.02.010 · Cited by 240 · see citing works

Energy saving potential of phase change materials in major Australian cities

Alam, M., Jamil, H., Sanjayan, J., & Wilson, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.027 · Cited by 238 · see citing works

Impact of phase change wall room on indoor thermal environment in winter

Lv, S., Zhu, N., & Guohui, F. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.007 · Cited by 234 · see citing works

Application of PCM energy storage in combination with night ventilation for space cooling

Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.088 · Cited by 186 · see citing works

Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building

Sage-Lauck, J. S., & Sailor, D. J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.028 · Cited by 166 · see citing works

Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling

Fukai, J., Hamada, Y., Morozumi, Y., & Miyatake, O. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00290-4 · Cited by 150 · see citing works

Realization, test and modelling of honeycomb wallboards containing a Phase Change Material

Hasse, C., Grenet, M., Bontemps, A., Dendievel, R., & Sallee, H. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.09.017 · Cited by 128 · see citing works

Enhancing the thermal response of latent heat storage systems

Bugaje, I. M. (1997) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(199707)21:9 · Cited by 102 · see citing works

Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings

Ramakrishnan, S., Wang, X., Alam, M., Sanjayan, J., & Wilson, J. L. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.065 · Cited by 76 · see citing works

A ventilated cooling ceiling with integrated latent heat storage—Monitoring results

Weinläder, H., Körner, W., & Strieder, B. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.013 · Cited by 68 · see citing works

Investigation of the thermal resistance of timber attic spaces with reflective foil and bulk insulation, heat flow up

Belusko, M., Bruno, F., & Saman, W. Y. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.07.017 · Cited by 44 · see citing works

Experimental and numerical investigations on the effect of using phase change materials for energy conservation in residential buildings

Behzadi, S., & Farid, M. M. (2011) · Science and Technology for the Built Environment · doi:10.1080/10789669.2011.573052 · Cited by 40 · see citing works

Use of some industrial wastes as energy storage media

Tayeb, A. M. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00171-9 · Cited by 36 · see citing works

Estimation of air infiltration for Australian housing energy analysis

Ren, Z., & Chen, D. (2014) · Journal of Building Physics · doi:10.1177/1744259114554970 · Cited by 31 · see citing works

Phase Change Materials as Thermal Storage for High Performance Homes

Campbell, K. R., & Sailor, D. J. (2011) · Volume 4: Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy, Parts A and B · doi:10.1115/imece2011-63273 · Cited by 17 · see citing works

Thermal Analysis in Phase Change Materials (PCMs) Embedded With Metal Foams

Tian, Y., & Zhao, C.-Y. (2010) · International Heat Transfer Conference (IHTC) · doi:10.1115/ihtc14-22452 · Cited by 16 · see citing works

Comparative analysis of building insulation material properties and performance

Kumar, D., Alam, M., Zou, P. X. W., Sanjayan, J., & Memon, R. A. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110038 · Cited by 512 · see citing works

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

Saffari, M., de Gracia, Á., Fernández, C. C., & Cabeza, L. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.107 · Cited by 346 · see citing works

Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review

Kasaeian, A., bahrami, L., Pourfayaz, F., Khodabandeh, E., & Yan, W.-M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.037 · Cited by 287 · see citing works

Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review

Saffari, M., de Gracia, Á., Ushak, S., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.139 · Cited by 232 · see citing works

Potential of microencapsulated PCM for energy savings in buildings: A critical review

Singh Rathore, P. K., Shukla, S. K., & Gupta, N. K. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101884 · Cited by 216 · see citing works

Resilient cooling strategies – A critical review and qualitative assessment

Zhang, C., Kazanci, O. B., Levinson, R., Heiselberg, P., Olesen, B. W., Chiesa, G., Sodagar, B., Ai, Z., Selkowitz, S., Zinzi, M., et al. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111312 · Cited by 180 · see citing works

Effective PCM, insulation, natural and/or night ventilation techniques to enhance the thermal performance of buildings located in various climates – A review

Arumugam, P., Velraj, R., & Vellaichamy, P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111840 · Cited by 176 · see citing works

Investigation of heat transfer of a building wall in the presence of phase change material (PCM)

Khan, R. J., Bhuiyan, M. Z. H., & Ahmed, D. H. (2020) · Energy and Built Environment · doi:10.1016/j.enbenv.2020.01.002 · Cited by 153 · see citing works

Optimal control of natural ventilation as passive cooling strategy for improving the energy performance of building envelope with PCM integration

Piselli, C., Prabhakar, M., de Gracia, Á., Saffari, M., Pisello, A. L., & Cabeza, L. F. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.07.043 · Cited by 143 · see citing works

Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach

Ramakrishnan, S., Wang, X., Sanjayan, J., & Wilson, J. L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.144 · Cited by 137 · see citing works

Phase change material (PCM) integrations into buildings in hot climates with simulation access for energy performance and thermal comfort: A review

Zhan, H., Mahyuddin, N., Sulaiman, R., & Khayatian, F. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132312 · Cited by 133 · see citing works

Experimental study of the influence of thermal mass on thermal comfort and cooling energy demand in residential buildings

Kuczyński, T., & Staszczuk, A. (2020) · Energy · doi:10.1016/j.energy.2020.116984 · Cited by 131 · see citing works

Building heating applications with phase change material: A comprehensive review

Li, Y., Nord, N., Xiao, Q., & Tereshchenko, T. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101634 · Cited by 127 · see citing works

Coupled EnergyPlus and CFD analysis of PCM for thermal management of buildings

Pandey, B., Banerjee, R., & Sharma, A. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110598 · Cited by 125 · see citing works

A literature review of night ventilation strategies in buildings

Solgi, E., Hamedani, Z., Fernando, R., Skates, H., & Orji, N. E. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.05.052 · Cited by 124 · see citing works

Description of phase change materials (PCMs) used in buildings under various climates: A review

Liu, L., Hammami, N., Trovalet, L., Bigot, D., Habas, J., & Malet-Damour, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105760 · Cited by 124 · see citing works

Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot Climate: An experimental study

Al-Yasiri, Q. M. Q., & Szabó, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118957 · Cited by 111 · see citing works

Development and thermal performance of nanoencapsulated PCM/ plaster wallboard for thermal energy storage in buildings

Maleki, B., Khadang, A., Maddah, H., Alizadeh, M., Kazemian, A., & Ali, H. M. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101727 · Cited by 109 · see citing works

A novel approach to investigate the thermal comfort of the lightweight relocatable building integrated with PCM in different climates of Kazakhstan during summertime

Adilkhanova, I., Memon, S. A., Kim, J. R., & Sheriyev, A. (2020) · Energy · doi:10.1016/j.energy.2020.119390 · Cited by 96 · see citing works

Parametric analysis of a residential building with phase change material (PCM)-enhanced drywall, precooling, and variable electric rates in a hot and dry climate

Wijesuriya, S., Brandt, M., & Tabares-Velasco, P. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.119 · Cited by 95 · see citing works

Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate

Kenzhekhanov, S., Memon, S. A., & Adilkhanova, I. (2019) · Energy · doi:10.1016/j.energy.2019.116607 · Cited by 89 · see citing works

An experimental study on applying organic PCMs to gypsum-cement board for improving thermal performance of buildings in different climates

Jeong, S., Wi, S., Chang, S. J., Lee, J., & Kim, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.037 · Cited by 88 · see citing works

Radiant heating floors with PCM bands for thermal energy storage: A numerical analysis

González, B., & Prieto, M. M. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106803 · Cited by 87 · see citing works

A Review of Recent Improvements, Developments, and Effects of Using Phase-Change Materials in Buildings to Store Thermal Energy

Rashid, F. L., Al-Obaidi, M. A. A., Dulaimi, A., Mahmood, D. M. N., & Sopian, K. (2023) · Designs · doi:10.3390/designs7040090 · Cited by 87 · see citing works

Energy saving performance assessment and lessons learned from the operation of an active phase change materials system in a multi-storey building in Melbourne

Alam, M., Zou, P. X. W., Sanjayan, J., & Ramakrishnan, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.116 · Cited by 80 · see citing works

A critical review for formulation and conceptualization of an ideal building envelope and novel sustainability framework for building applications

Kumar, D., Alam, M., Memon, R. A., & Bhayo, B. A. (2022) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2022.100555 · Cited by 78 · see citing works

Development and thermal performance of an expanded perlite-based phase change material wallboard for passive cooling in building

Kong, X., Yao, C., Jie, P., Liu, Y., Qi, C., & Rong, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.06.067 · Cited by 78 · see citing works

Climatic and seasonal suitability of phase change materials coupled with night ventilation for office buildings in Western China

Liu, J., Liu, Y., Yang, L., Liu, T., Zhang, C., & Dong, H. D. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.069 · Cited by 77 · see citing works

PCM embedded radiant chilled ceiling: A state-of-the-art review

Mousavi, S., Rismanchi, B., Brey, S., & Aye, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111601 · Cited by 72 · see citing works

Modeling investigation for energy storage system including mixture of paraffin and ZnO nano-powders considering porous media

Sheikholeslami, M. (2022) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2022.111066 · Cited by 71 · see citing works

Red-mud geopolymer composite encapsulated phase change material for thermal comfort in built-sector

Afolabi, L. O., Ariff, Z. M., Megat-Yusoff, P. S. M., Al-Kayiem, H. H., Arogundade, A. I., & Afolabi-Owolabi, O. T. (2019) · Solar Energy · doi:10.1016/j.solener.2019.02.029 · Cited by 70 · see citing works

Impact of a passive retrofit shading system on educational building to improve thermal comfort and energy consumption

Park, J. H., Yun, B. Y., Chang, S. J., Wi, S., Jeon, J., & Kim, S. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.109930 · Cited by 69 · see citing works

A review of climate adaptation of phase change material incorporated in building envelopes for passive energy conservation

Yang, T., Ding, Y., Li, B., & Athienitis, A. K. (2023) · Building and Environment · doi:10.1016/j.buildenv.2023.110711 · Cited by 68 · see citing works

Experimental analysis of thermal performance in buildings with shape-stabilized phase change materials

Kim, H. B., Masayuki, M. A. E., Choi, Y., & Kiyota, T. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.07.076 · Cited by 66 · see citing works

Phase change in spiral coil heat storage systems

Ahmadi, R., Hosseini, M. J., Ranjbar, A. A., & Bahrampoury, R. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.12.026 · Cited by 64 · see citing works

Combined use of phase change material and thermal insulation to improve energy efficiency of residential buildings

Abden, M. J., Tao, Z., Alim, M. A., Pan, Z., George, L., & Wuhrer, R. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105880 · Cited by 59 · see citing works

Energy-saving owing to using PCM into buildings: Considering of hot and cold climate region

Dehkordi, B. S., & Afrand, M. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2022.102112 · Cited by 58 · see citing works

The development trends of existing building energy conservation and emission reduction—A comprehensive review

Huang, H., Wang, H., Hu, Y., Li, C., & Wang, X. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.10.023 · Cited by 58 · see citing works

The effectiveness of phase change materials in relation to summer thermal comfort in air-conditioned office buildings

Costanzo, V., Evola, G., Marletta, L., & Nocera, F. (2018) · Building Simulation · doi:10.1007/s12273-018-0468-2 · Cited by 58 · see citing works

Quantitative evaluation of the thermal and energy performance of the PCM integrated building in the subtropical climate zone for current and future climate scenario

Nurlybekova, G., Memon, S. A., & Adilkhanova, I. (2020) · Energy · doi:10.1016/j.energy.2020.119587 · Cited by 58 · see citing works

Potential Phase Change Materials in Building Wall Construction—A Review

Kurdi, A., Almoatham, N., Mirza, M., Ballweg, T., & Alkahlan, B. (2021) · Materials · doi:10.3390/ma14185328 · Cited by 59 · see citing works

Optimization of phase change materials to improve energy performance within thermal comfort range in the South Korean climate

Park, J. H., Lee, J., Wi, S., Jeon, J., Chang, S. J., Chang, J. D., & Kim, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.12.013 · Cited by 57 · see citing works

Implementation of the panel data regression analysis in PCM integrated buildings located in a humid subtropical climate

Kabdrakhmanova, M., Memon, S. A., & Saurbayeva, A. (2021) · Energy · doi:10.1016/j.energy.2021.121651 · Cited by 54 · see citing works

Recent advances and perspectives in solar photothermal conversion and storage systems: A review

Li, J., Long, Y., Cao, X., Sun, H., Jiao, R., Zhu, Z., Liang, W., & Li, A. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103118 · Cited by 54 · see citing works

Effect of sunspace and PCM louver combination on the energy saving of rural residences: Case study in a severe cold region of China

Li, Q., Wang, Y., Ma, L., Arıcı, M., Li, D., Yıldız, Ç., & Zhu, Y. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101126 · Cited by 54 · see citing works

Buildings with less HVAC power demand by incorporating PCM into envelopes taking into account ASHRAE climate classification

Kalbasi, R., & Hassani, P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104303 · Cited by 53 · see citing works

Thermal energy simulation of PCM-based radiant floor cooling systems for naturally ventilated buildings in a hot and humid climate

Kitagawa, H., Asawa, T., Denis, M. A. D. R., Kubota, T., & Trihamdani, A. R. (2023) · Building and Environment · doi:10.1016/j.buildenv.2023.110351 · Cited by 53 · see citing works

Implementation of a double layer of PCM integrated into the building exterior walls for reducing annual energy consumption: Effect of PCM wallboards position

Refahi, A., Rostami, A., & Amani, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110556 · Cited by 53 · see citing works

Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study

Alam, M., Sanjayan, J., Zou, P. X. W., Ramakrishnan, S., & Wilson, J. L. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.018 · Cited by 53 · see citing works

Effectiveness of phase change materials for improving the resiliency of residential buildings to extreme thermal conditions

Baniassadi, A., Sailor, D. J., & Bryan, H. J. (2019) · Solar Energy · doi:10.1016/j.solener.2019.06.011 · Cited by 52 · see citing works

Performance evaluation of phase change materials suitable for cities representing the whole tropical savanna climate region

Bimaganbetova, M., Memon, S. A., & Sheriyev, A. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.046 · Cited by 52 · see citing works

Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China

Li, Q., Ma, L., Li, D., Arıcı, M., Yıldız, Ç., Wang, Z., & Liu, Y. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101091 · Cited by 52 · see citing works

Thermal performance assessment of passive techniques integrated into a residential building in semi-arid climate

Mastouri, H., Benhamou, B., Hamdi, H., & Mouyal, E. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.022 · Cited by 50 · see citing works

A parametric study of phase change material characteristics when coupled with thermal insulation for different Australian climatic zones

Solgi, E., Hamedani, Z., Fernando, R., & Kari, B. M. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106317 · Cited by 47 · see citing works

Low-energy residential building optimisation for energy and comfort enhancement in semi-arid climate conditions

Mousavi, S., Gheibi, M., Wacławek, S., Smith, N. R., Hajiaghaei–Keshteli, M., & Behzadian, K. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117264 · Cited by 46 · see citing works

Study of a thermally enhanced mortar incorporating phase change materials for overheating reduction in buildings

Rebelo, F., Figueiredo, A., Vicente, R., & Ferreira, V. M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103876 · Cited by 46 · see citing works

Application of shape-stabilized phase-change material sheets as thermal energy storage to reduce heating load in Japanese climate

Kim, H. B., Masayuki, M. A. E., & Choi, Y. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.08.038 · Cited by 45 · see citing works

Experimental Investigation and Numerical Modeling of Room Temperature Control in Buildings by the Implementation of Phase Change Material in the Roof

Nagappan, B., Yuvarajan, D., Arulprakasajothi, M., Ganesan, S., Elangovan, K., & Senthilkumar, G. (2019) · Journal of Solar Energy Engineering · doi:10.1115/1.4044564 · Cited by 44 · see citing works

The impact of wall and roof material on the summer thermal performance of building in a temperate climate

Staszczuk, A. K., & Kuczyński, T. (2021) · Energy · doi:10.1016/j.energy.2021.120482 · Cited by 44 · see citing works

An experimental study on applying PCMs to disaster-relief prefabricated temporary houses for improving internal thermal environment in summer

Wang, C., Huang, X. M., Deng, S., Long, E., & Niu, J. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.09.028 · Cited by 41 · see citing works

Optimal positioning of phase change material and insulation through numerical investigations to reduce cooling loads in office buildings

Arumugam, P., Velraj, R., & Vellaichamy, P. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104946 · Cited by 40 · see citing works

Retrofitting Building Envelope Using Phase Change Materials and Aerogel Render for Adaptation to Extreme Heatwave: A Multi-Objective Analysis Considering Heat Stress, Energy, Environment, and Cost

Kumar, D., Alam, M., & Sanjayan, J. (2021) · Sustainability · doi:10.3390/su131910716 · Cited by 39 · see citing works

Empirical validation and comparison of methodologies to simulate micro and macro-encapsulated PCMs in the building envelope

Wijesuriya, S., & Tabares-Velasco, P. C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116646 · Cited by 32 · see citing works

Investigation of the performance of a cylindrical PCM-to-air heat exchanger (PAHE) for free ventilation cooling in fluctuating ambient environments

Yang, D., Shi, R., Wei, H., Du, J., & Wang, J. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101764 · Cited by 31 · see citing works

Numerical analysis of phase change materials/wood–plastic composite roof module system for improving thermal performance

Chang, S. J., Wi, S., Cho, H., Jeong, S., & Kim, S. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.11.005 · Cited by 31 · see citing works

Evaluating the adaptation potential and retrofitting effectiveness of existing residential buildings in severe cold regions of China under climate change

Wang, D., Dong, Q., & Sun, C. T. (2025) · Building and Environment · doi:10.1016/j.buildenv.2025.112982 · Cited by 30 · see citing works

Parametric study on the thermal performance of phase change material-assisted earth-to-air heat exchanger

Liu, Q., Huang, Y., Ma, Y., Peng, Y., & Wang, Y. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.110811 · Cited by 29 · see citing works

Mechanical and thermal performance assessment of paraffin/expanded vermiculite-diatomite composite phase change materials integrated mortar: Experimental and numerical approach

Li, M., & Shi, J. (2021) · Solar Energy · doi:10.1016/j.solener.2021.09.014 · Cited by 29 · see citing works

Experimental study of the thermal behavior of PCM and heavy building envelope structures during summer in a temperate climate

Kuczyński, T., & Staszczuk, A. K. (2023) · Energy · doi:10.1016/j.energy.2023.128033 · Cited by 30 · see citing works

Breaking new ground: A first-of-its-kind critical analysis of review articles on phase change materials for building applications

Ahmad, A., Memon, S. A., Dang, H., Sarı, A., & Gençel, O. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125984 · Cited by 28 · see citing works

Single and combined phase change materials: Their effect on seasonal transition period

Memarian, S., Kari, B. M., Fayaz, R., & Asadi, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.03.085 · Cited by 28 · see citing works

Numerical investigation of the indoor thermal behaviour based on PCMs in a hot climate

Ismail, R. M., Megahed, N. A., & Eltarabily, S. (2022) · Architectural Science Review · doi:10.1080/00038628.2022.2058459 · Cited by 27 · see citing works

Experimental apparatus and methodology to test and quantify thermal performance of micro and macro-encapsulated phase change materials in building envelope applications

Wijesuriya, S., & Tabares-Velasco, P. C. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101770 · Cited by 26 · see citing works

Effects of thermal conductive fillers on energy storage performance of Form-Stable phase change material integrated in Cement-Based composites

Yousefi, A., Tang, W., Khavarian, M., & Fang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118570 · Cited by 24 · see citing works

Judicious method of integrating phase change materials into a building envelope under Saharan climate

Hamdani, M., Bekkouche, S. M. E. A., Al-Saadi, S. N., Cherier, M. K., Djeffal, R., & Zaiani, M. (2021) · International Journal of Energy Research · doi:10.1002/er.6951 · Cited by 22 · see citing works

Enhancement Techniques for the Reduction of Heating and Cooling Loads in Buildings: A Review

Ismail, K. A. R., Lino, F. A. M., Henriquez, J. R., Teggar, M., Laouer, A., Arıcı, M., Benhorma, A., & Rodríguez, D. (2023) · Journal of Energy and Power Technology · doi:10.21926/jept.2304031 · Cited by 22 · see citing works

Development and thermal performance of wood-HPDE- PCM nanocapsule floor for passive cooling in building

Valizadeh, S., Ehsani, M., & Angji, M. T. (2019) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2018.1550125 · Cited by 22 · see citing works

Analysis of Incorporating a Phase Change Material in a Roof for the Thermal Management of School Buildings in Hot-Humid Climates

Hwang, R., Chen, B., & Chen, W.-A. (2021) · Buildings · doi:10.3390/buildings11060248 · Cited by 21 · see citing works

Enhancing performance of building elements with phase change materials for cooling with air-based systems

Zavrl, E., Mankibi, M. E., Dovjak, M., & Stritih, U. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104461 · Cited by 21 · see citing works

Experimental investigation of air-based active-passive system for cooling application in buildings

Zavrl, E., Mankibi, M. E., Dovjak, M., & Stritih, U. (2022) · Sustainable Cities and Society · doi:10.1016/j.scs.2022.104031 · Cited by 20 · see citing works

Introducing two scenarios to reduce building energy usage: PCM installation and integrating nanofluid solar collectors with DHW system

Khetib, Y., Gari, A. A., & Kalbasi, R. (2021) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2021.06.013 · Cited by 19 · see citing works

An energy-efficient form-stable phase change materials synthesis method to enhance thermal storage and prevent acidification of cementitious composite

Kumar, D., Alam, M., & Sanjayan, J. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128697 · Cited by 19 · see citing works

Low-energy resilient cooling through geothermal heat dissipation and latent heat storage

Mehmood, S., Lizana, J., & Friedrich, D. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108377 · Cited by 19 · see citing works

Effectiveness of Mechanical Air Conditioning as a Protective Factor Against Indoor Exposure to Heat Among the Elderly

Baniassadi, A., Sailor, D. J., O’Lenick, C. R., Wilhelmi, O. V., Crank, P. J., Chester, M., & Reddy, A. T. (2019) · ASME Journal of Engineering for Sustainable Buildings and Cities · doi:10.1115/1.4045678 · Cited by 19 · see citing works

Enhancing thermal performance of cross-laminated timber using phase change materials and biochar composites

Park, J.-Y., Chang, S. J., & Kim, S. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2024.115198 · Cited by 19 · see citing works

Long-term functionality of a passive phase-change materials building application after more than a decade of operation

Obergfell, T., Guzmán, J. S., Haussmann, T., Gschwander, S., & Wagner, A. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111213 · Cited by 17 · see citing works

Mitigation of heat stress risks through building energy efficiency upgrade: a case study of Melbourne, Australia

Alam, M., Rajeev, P., Sanjayan, J., Zou, P. X. W., & Wilson, J. L. (2018) · Australian Journal of Civil Engineering · doi:10.1080/14488353.2018.1453331 · Cited by 17 · see citing works

Performance evaluation of phase change material integration in buildings using novel non-dimensional performance parameters for different cities and months in India

Prakash, S. A., Gunadevan, D., Arivazhagan, R., Sheeja, R., Raj, V. A. A., & Velraj, R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103015 · Cited by 17 · see citing works

Assessment of Phase Change Materials Incorporation into Construction Commodities for Sustainable and Energy-Efficient Building Applications

Rahman, I. U., Manca, O., Buonomo, B., Bounib, M., Rehman, S. U., Salhab, H., Caggiano, A., & Nardini, S. (2025) · Buildings · doi:10.3390/buildings15173109 · Cited by 15 · see citing works

A Comparative Analysis of Standard and Nano-Structured Glass for Enhancing Heat Transfer and Reducing Energy Consumption Using Metal and Oxide Nanoparticles: A Review

Jastaneyah, Z., Kamar, H. M., Alansari, A. M., & Garalleh, H. A. (2023) · Sustainability · doi:10.3390/su15129221 · Cited by 15 · see citing works

Radiant Conditioning Retrofitting for Residential Buildings

Do, H. Q., Luther, M., Amirkhani, M., Wang, Z., & Martek, I. (2022) · Energies · doi:10.3390/en15020449 · Cited by 15 · see citing works

Effect of Phase Change Materials on the Thermal Performance of Residential Building Located in Different Cities of a Tropical Rainforest Climate Zone

Sheriyev, A., Memon, S. A., Adilkhanova, I., & Kim, J. R. (2021) · Energies · doi:10.3390/en14092699 · Cited by 13 · see citing works

Comparison of heavy building envelopes and PCM: Impact on indoor temperature peaks and cooling energy use during heat events

Kuczyński, T., Staszczuk, A. K., & Gortych, M. (2025) · Energy · doi:10.1016/j.energy.2025.136213 · Cited by 13 · see citing works

Thermal performance study of double-layer heterogeneous phase change wall under active and passive regulations in different seasons

Fan, M., Yang, Q., Suo, H., Kong, X., Han, L., Zheng, W., & Zhang, Y. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123304 · Cited by 12 · see citing works

Overheating Reduction in Lightweight Framed Buildings with Application of Phase Change Materials

Zavrl, E., Zupanc, G., Stritih, U., & Dovjak, M. (2019) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2019.6244 · Cited by 12 · see citing works

Developments on energy-efficient buildings using phase change materials: a sustainable building solution

Shohan, A. A. A., Ganesan, H., Alsulamy, S. H., Kumar, A., Almujibah, H. R., Petrounias, P., & Jeyan, J. V. M. L. (2023) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-023-02626-9 · Cited by 11 · see citing works

Thermal Comfort in Buildings: Scientometric Analysis and Systematic Review

Horr, Y. A., Arif, M., Kaushik, A. K., Arsalan, H., Mazroei, A., & Rana, M. Q. (2023) · Journal of Architectural Engineering · doi:10.1061/jaeied.aeeng-1490 · Cited by 14 · see citing works

From lab to building: Real-world integration of phase change materials for comfort, energy, and flexibility

Attia, S., Hammouma, T., Galeone, D., Zhang, Z., Zhang, N., Corrado, V., & Yuan, Y. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116813 · Cited by 12 · see citing works

Thermal Storage Effect Analysis of Floor Heating Systems Using Latent Heat Storage Sheets

Yun, B. Y., Yang, S., Cho, H. M., Wi, S., & Kim, S. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00131-3 · Cited by 10 · see citing works

The Effects of Thickness and Location of PCM on the Building’s Passive Temperature-Control–A Numerical Study

Shi, Z., Ren, J., Zhang, T., & Shen, Y. (2024) · Energy Engineering · doi:10.32604/ee.2023.045238 · Cited by 9 · see citing works

Experimental study on thermal comfort improvement of building envelope with PCM energy storage

Ye, H., Wang, Y., & Qian, F. (2019) · CRC Press eBooks · doi:10.1201/9781003000716-28 · Cited by 2 · see citing works

Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: Experimental design and response surface approach

Alizadeh, M., & Sadrameli, S. M. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.020 · Cited by 69 · see citing works

Effect of PCM in improving the thermal cooling comfort in buildings ceiling

Rashdi, N. A. (2019) · Murdoch University Research Portal

Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

Al-Absi, Z. A., Isa, M. H. M., Ismail, M., & Ghazali, A. (2021) · Sustainability · doi:10.3390/su13073614 · Cited by 32 · see citing works

Indoor thermal comfort assessment using different constructive solutions incorporating PCM

Figueiredo, A., Vicente, R., Lapa, J., Cardoso, C., Rodrigues, F., & Kämpf, J. H. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.032 · Cited by 103 · see citing works