Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 277

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Passive cooling techniques for building and their applicability in different climatic zones—The state of art

Bhamare, Dnyandip K., Rathod, Manish K., Banerjee, Jyotirmay·2019·Energy and Buildings
DOI 10.1016/j.enbuild.2019.06.023
Open this paper in CoChat — free account

Abstract

Abstract Building energy consumption is a vital component of the global energy mandate. A major part of the building energy is consumed in providing thermal comfort to occupants. Passive cooling techniques can be a promising alternative to satisfy the cooling requirements of the building as well as to reduce the building energy consumption. Selection of suitable passive cooling technique is dependent on many factors, including climatic conditions, building space constraints and performance of the passive technique. Thus, in order to adopt a suitable passive cooling technique for a given building, a thorough knowledge of different passive cooling techniques along with their applications and performance parameters is necessary. The objective of this article is to provide a comprehensive review on passive cooling techniques along with its classification, working, applications, recent developments and to analyze the influence of significant parameters such as building cooling load and indoor temperature on the performance of passive cooling techniques. The review establishes that passive cooling techniques have the potential to maintain the indoor temperature within comfort range while reducing the building cooling load.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.enbuild.2019.06.023

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 226

  1. Agencia Internacional de la Energía. World Energy Outlook 2017. Int ENERGY AGENCY Together Secur Sustain 2017; Executive: 13. doi:10.1016/0301-4215(73)90024-4. · DOI
  2. Santamouris, 2013, Passive cooling dissipation techniques for buildings and other structures: the state of the art, Energy Build., 57, 74, 10.1016/j.enbuild.2012.11.002 · DOI · Paper page
  3. N.B. Geetha, R. Velraj, Passive cooling methods for energy efficient buildings with and without thermal energy storage – a review 2012;29:913–46.
  4. Prieto, 2017, 25 Years of cooling research in office buildings: review for the integration of cooling strategies into the building façade (1990 – 2014), Renew. Sustain. Energy Rev., 71, 89, 10.1016/j.rser.2017.01.012 · DOI
  5. Panchabikesan, 2017, Passive cooling potential in buildings under various climatic conditions in India, Renew. Sustain. Energy Rev., 78, 1236, 10.1016/j.rser.2017.05.030 · DOI
  6. Alizadeh, 2016, Development of free cooling based ventilation technology for buildings: thermal energy storage (TES) unit, performance enhancement techniques and design considerations – a review, Renew. Sustain. Energy Rev., 58, 619, 10.1016/j.rser.2015.12.168 · DOI
  7. Souayfane, 2016, Phase change materials (PCM) for cooling applications in buildings: a review, Energy Build., 129, 396, 10.1016/j.enbuild.2016.04.006 · DOI · Paper page
  8. Akeiber, 2016, A review on phase change material (PCM) for sustainable passive cooling in building envelopes, Renew. Sustain. Energy Rev., 60, 1470, 10.1016/j.rser.2016.03.036 · DOI · Paper page
  9. Lu, 2016, Cooling potential and applications prospects of passive radiative cooling in buildings: the current state-of-the-art, Renew. Sustain. Energy Rev., 65, 1079, 10.1016/j.rser.2016.07.058 · DOI · Paper page
  10. Chan, 2010, Review of passive solar heating and cooling technologies, Renew. Sustain. Energy Rev., 14, 781, 10.1016/j.rser.2009.10.030 · DOI · Paper page
  11. Duan, 2012, Indirect evaporative cooling: past, present and future potentials, Renew. Sustain. Energy Rev., 16, 6823, 10.1016/j.rser.2012.07.007 · DOI · Paper page
  12. Oropeza-perez, 2018, Active and passive cooling methods for dwellings: a review, Renew. Sustain. Energy Rev., 82, 531, 10.1016/j.rser.2017.09.059 · DOI
  13. Jomehzadeh, 2017, A review on windcatcher for passive cooling and natural ventilation in buildings, Part 1: indoor air quality and thermal comfort assessment, Renew. Sustain. Energy Rev., 70, 736, 10.1016/j.rser.2016.11.254 · DOI
  14. Goudarzi, 2017, Energy saving evaluation of passive systems for residential buildings in hot and dry regions, Renew Sustain Energy Rev, 68, 432, 10.1016/j.rser.2016.10.002 · DOI
  15. Hughes, 2011, A review of sustainable cooling technologies in buildings, Renew. Sustain. Energy Rev., 15, 3112, 10.1016/j.rser.2011.03.032 · DOI
  16. Konstantoglou, 2016, Dynamic operation of daylighting and shading systems: a literature review, Renew. Sustain. Energy Rev., 60, 268, 10.1016/j.rser.2015.12.246 · DOI
  17. Tejero-González, 2016, Assessing the applicability of passive cooling and heating techniques through climate factors: an overview, Renew. Sustain. Energy Rev., 65, 727, 10.1016/j.rser.2016.06.077 · DOI
  18. B. Raji, M.J. Tenpierik, van den A. Dobbelsteen, The impact of greening systems on building energy performance: a literature review n.d.:1–25.
  19. Meier, 1990, Strategic landscaping and air-conditioning savings: a literature review, Energy Build., 15, 479, 10.1016/0378-7788(90)90024-D · DOI
  20. Hsieh, 2018, Effects of tree shading and transpiration on building cooling energy use, Energy Build., 159, 382, 10.1016/j.enbuild.2017.10.045 · DOI
  21. Berry, 2013, Tree canopy shade impacts on solar irradiance received by building walls and their surface temperature, Build. Environ., 69, 91, 10.1016/j.buildenv.2013.07.009 · DOI
  22. M. Fairuz, P.J. Jones, J. Gwilliam, E. Salleh, An evaluation of outdoor and building environment cooling achieved through combination modification of trees with ground materials 2012;58. · DOI
  23. Pandit, 2010, Energy savings from tree shade, Ecol. Econ., 69, 1324, 10.1016/j.ecolecon.2010.01.009 · DOI
  24. J.R. Simpson, Improved estimates of tree-shade effects on residential energy use 2002;34. · DOI
  25. H. Akbari, M. Pomerantz, H. Taha, Cool surfaces and shade trees to reduce energy use and improve air quality in urban areas 2001;70:295–310. · DOI · Paper page
  26. D. Holm, Thermal improvement by means of leaf cover on external walls - a simulation model 1989;14:19–30. · DOI
  27. Nahar, 1999, Studies on solar passive cooling techniques for arid areas., Energy Convers. Manag., 40, 89, 10.1016/S0196-8904(98)00039-9 · DOI
  28. Tiwari, 1982, A review-Cooling by water evaporation over roof, Energy Convers. Manag., 22, 143, 10.1016/0196-8904(82)90036-X · DOI
  29. Sharifi, 2015, Roof ponds as passive heating and cooling systems: a systematic review, Appl. Energy, 160, 336, 10.1016/j.apenergy.2015.09.061 · DOI
  30. Spanaki, 2011, On the selection and design of the proper roof pond variant for passive cooling purposes, Renew. Sustain. Energy Rev., 15, 3523, 10.1016/j.rser.2011.05.007 · DOI
  31. Esparza, 2018, Potential of a wet fabric device as a roof evaporative cooling solution: mathematical and experimental analysis, J. Build. Eng., 19, 366, 10.1016/j.jobe.2018.05.021 · DOI
  32. Vorster, 2011, Sustainable cooling alternatives for buildings, J. Energy S. Afr., 22, 48, 10.17159/2413-3051/2011/v22i4a3229 · DOI
  33. Kharrufa, 2008, Roof pond cooling of the buildings in hot arid climates, Build. Environ., 43, 82, 10.1016/j.buildenv.2006.11.034 · DOI
  34. Runsheng, 2003, Experimental studies on a novel roof pond configuration for the cooling of the buildings, Renew. Energy, 28, 1513, 10.1016/S0960-1481(03)00002-8 · DOI
  35. Sodha, 1980, Periodic theory of an open roof pond, Appl. Energy, 7, 305, 10.1016/0306-2619(80)90005-7 · DOI
  36. Santamouris, 1996, Passive cooling of the buildings, Science
  37. Lee, 2013, Optimization of the building window system in Asian regions by analyzing solar heat gain and daylighting elements, Renew. Energy, 50, 522, 10.1016/j.renene.2012.07.029 · DOI · Paper page
  38. Hee, 2015, The role of window glazing on daylighting and energy saving in buildings, Renew. Sustain. Energy Rev., 42, 323, 10.1016/j.rser.2014.09.020 · DOI · Paper page
  39. Manz, 2008, On minimizing heat transport in architectural glazing, Renew. Energy, 33, 119, 10.1016/j.renene.2007.01.007 · DOI
  40. Eames, 2008, Vacuum glazing: current performance and future prospects, Vacuum, 82, 717, 10.1016/j.vacuum.2007.10.017 · DOI
  41. Fang, 2007, Low emittance coatings and the thermal performance of vacuum glazing, Sol. Energy, 81, 8, 10.1016/j.solener.2006.06.011 · DOI
  42. Kang, 2003, Manufacturing method for transparent electric windows using dye-sensitized TiO2 solar cells, Sol. Energy Mater. Sol. Cells, 75, 475, 10.1016/S0927-0248(02)00202-7 · DOI
  43. Kumara, 2017, Recent progress and utilization of natural pigments in dye sensitized solar cells: a review, Renew. Sustain. Energy Rev., 78, 301, 10.1016/j.rser.2017.04.075 · DOI · Paper page
  44. Baetens, 2011, Aerogel insulation for building applications: a state-of-the-art review, Energy Build., 43, 761, 10.1016/j.enbuild.2010.12.012 · DOI · Paper page
  45. Schultz, 2008, Evacuated aerogel glazings, Vacuum, 82, 723, 10.1016/j.vacuum.2007.10.019 · DOI
  46. Chiba, 2005, Low-emissivity coating of amorphous diamond-like carbon/Ag-alloy multilayer on glass, Appl. Surf. Sci., 246, 48, 10.1016/j.apsusc.2004.10.046 · DOI
  47. Reidinger, 2009, Low-emitting transparent coatings based on tin doped indiumoxide applied via a sol-gel routine, Thin Solid Films, 517, 3096, 10.1016/j.tsf.2008.11.078 · DOI
  48. Cuce, 2016, Toward multi-functional PV glazing technologies in low/zero carbon buildings: heat insulation solar glass - latest developments and future prospects, Renew. Sustain. Energy Rev., 60, 1286, 10.1016/j.rser.2016.03.009 · DOI
  49. Ng, 2014, Lifetime performance of semi-transparent building-integrated photovoltaic (BIPV) glazing systems in the tropics, Renew. Sustain. Energy Rev., 31, 736, 10.1016/j.rser.2013.12.044 · DOI
  50. Weber, 2012, Thermotropic glazings for overheating protection, Energy Procedia, 30, 471, 10.1016/j.egypro.2012.11.056 · DOI
  51. Nitz, 2005, Solar control with thermotropic layers, Sol. Energy, 79, 573, 10.1016/j.solener.2004.12.009 · DOI
  52. Cuce, 2015, A state-of-the-art review on innovative glazing technologies, Renew. Sustain. Energy Rev., 41, 695, 10.1016/j.rser.2014.08.084 · DOI
  53. Rezaei, 2017, A review of conventional, advanced, and smart glazing technologies and materials for improving indoor environment, Sol. Energy Mater. Sol. Cells, 159, 26, 10.1016/j.solmat.2016.08.026 · DOI · Paper page
  54. Tahmasebi, 2011, Assessment of the variation impacts of window on energy consumption and carbon footprint, Procedia Eng., 21, 820, 10.1016/j.proeng.2011.11.2083 · DOI
  55. Sbar, 2012, Electrochromic dynamic windows for office buildings, Int. J. Sustain. Built Environ., 1, 125, 10.1016/j.ijsbe.2012.09.001 · DOI
  56. Yao, 2012, Evaluation of indoor thermal environmental, energy and daylighting performance of thermotropic windows, Build. Environ., 49, 283, 10.1016/j.buildenv.2011.06.004 · DOI
  57. Chow, 2007, Performance evaluation of a PV ventilated window applying to office building of Hong Kong, Energy Build., 39, 643, 10.1016/j.enbuild.2006.09.014 · DOI
  58. Guo, 2012, Application of PV window foroffice building in hot summer and cold winter zone of China, Adv. Mater. Res., 347, 81
  59. Buratti, 2012, Experimental performance evaluation of aerogel glazing systems, Appl. Energy, 97, 430, 10.1016/j.apenergy.2011.12.055 · DOI
  60. Aǐnbinder, 1965, Klinicheskoe techenie pnevmokonizoa u invalidov-shakhterov kuzbassa (po materialam BTEK), Meditsina Tr I Promyshlennaya Ekol, 9, 43
  61. Littlefair, 2001, Daylight, sunlight and solar gain in the urban environment, Sol. Energy, 70, 177, 10.1016/S0038-092X(00)00099-2 · DOI
  62. Kim, 2012, Comparative advantage of an exterior shading device in thermal performance for residential buildings, Energy Build., 46, 105, 10.1016/j.enbuild.2011.10.040 · DOI · Paper page
  63. Gupta, 2016, Review of passive heating/cooling systems of the buildings, Energy Sci. Eng., 4, 305, 10.1002/ese3.129 · DOI
  64. Al-Masrani, 2018, Design optimisation of solar shading systems for tropical office buildings: challenges and future trends, Sol. Energy, 170, 849, 10.1016/j.solener.2018.04.047 · DOI
  65. Valladares-Rendón, 2017, Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of façade shading systems, Energy Build., 140, 458, 10.1016/j.enbuild.2016.12.073 · DOI
  66. Claros, 2001, Indoor daylight climate-comparison between light shelves and overhang performances in Madrid for hours with unit sunshine fraction and realistic values of model reflectance, Sol. Energy, 71, 233, 10.1016/S0038-092X(01)00046-9 · DOI
  67. Meresi, 2016, Evaluating daylight performance of light shelves combined with external blinds in south-facing classrooms in Athens, Greece, Energy Build., 116, 190, 10.1016/j.enbuild.2016.01.009 · DOI
  68. Berardi, 2015, Analysis of the impacts of light shelves on the useful daylight illuminance in office buildings in Toronto, Energy Procedia, 78, 1793, 10.1016/j.egypro.2015.11.310 · DOI
  69. Mangkuto, 2018, Optimisation of daylight admission based on modifications of light shelf design parameters, J. Build. Eng., 18, 195, 10.1016/j.jobe.2018.03.007 · DOI
  70. David, 2011, Assessment of the thermal and visual efficiency of solar shades, Build. Environ., 46, 1489, 10.1016/j.buildenv.2011.01.022 · DOI
  71. Stazi, 2014, Comparison on solar shadings: monitoring of the thermo-physical behaviour, assessment of the energy saving, thermal comfort, natural lighting and environmental impact, Sol. Energy, 105, 512, 10.1016/j.solener.2014.04.005 · DOI
  72. Xiong, 2016, Model-based shading and lighting controls considering visual comfort and energy use, Sol. Energy, 134, 416, 10.1016/j.solener.2016.04.026 · DOI
  73. Yun, 2014, The influence of shading control strategies on the visual comfort and energy demand of office buildings, Energy Build., 84, 70, 10.1016/j.enbuild.2014.07.040 · DOI
  74. Sicurella, 2012, A statistical approach for the evaluation of thermal and visual comfort in free-running buildings, Energy Build., 47, 402, 10.1016/j.enbuild.2011.12.013 · DOI
  75. Cho, 1995, the Effect of Slat Angle of Windows With Venetian, Energy, 20, 1225, 10.1016/0360-5442(95)00074-Q · DOI
  76. Wong, 2007, A study of the effectiveness of passive climate control in naturally ventilated residential buildings in Singapore, Build. Environ., 42, 1395, 10.1016/j.buildenv.2005.11.032 · DOI
  77. Yu, 2008, Low-energy envelope design of residential building in hot summer and cold winter zone in China, Energy Build., 40, 1536, 10.1016/j.enbuild.2008.02.020 · DOI
  78. Yang, 1995, Energy conservation of the buildings in Taiwan, Pattern Recognit., 28, 1483, 10.1016/0031-3203(94)00153-D · DOI
  79. Ali Ahmed, 2012, Using simulation for studying the influence of vertical shading devices on the thermal performance of residential buildings (Case study: New Assiut City), Ain Shams Eng. J., 3, 163, 10.1016/j.asej.2012.02.001 · DOI
  80. Shen, 2014, Energy and visual comfort analysis of lighting and daylight control strategies, Build. Environ., 78, 155, 10.1016/j.buildenv.2014.04.028 · DOI
  81. Tzempelikos, 2007, The impact of shading design and control on building cooling and lighting demand, Sol. Energy, 81, 369, 10.1016/j.solener.2006.06.015 · DOI · Paper page
  82. R. Krishnan, Introduction to. Control 2014:2014. doi:10.1016/B978-0-240-81203-8.00002-7. · DOI
  83. Navarro, 2016, Thermal energy storage in building integrated thermal systems: a review. Part 2. Integration as passive system, Renew. Energy, 85, 1334, 10.1016/j.renene.2015.06.064 · DOI · Paper page
  84. Kosny, 2001, Thermal mass - energy savings potential in residential buildings, ORNL, 25
  85. Verbeke, 2018, Thermal inertia in buildings: a review of impacts across climate and building use, Renew. Sustain. Energy Rev., 82, 2300, 10.1016/j.rser.2017.08.083 · DOI · Paper page
  86. Rathod, 2013, Thermal stability of phase change materials used in latent heat energy storage systems: a review, Renew Sustain Energy Rev, 18, 246, 10.1016/j.rser.2012.10.022 · DOI · Paper page
  87. Hawes, 1993, Latent heat storage in building materials, Energy Build., 20, 77, 10.1016/0378-7788(93)90040-2 · DOI · Paper page
  88. Memon, 2014, Phase change materials integrated in building walls: a state of the art review, Renew. Sustain. Energy Rev., 31, 870, 10.1016/j.rser.2013.12.042 · DOI · Paper page
  89. Hariri, 1988, A review of thermal storage systems used in building applications, Build. Environ., 23, 1, 10.1016/0360-1323(88)90011-X · DOI
  90. Saffari, 2017, Passive cooling of the buildings with phase change materials using whole-building energy simulation tools: a review, Renew. Sustain. Energy Rev., 80, 1239, 10.1016/j.rser.2017.05.139 · DOI
  91. Kalnæs, 2015, Phase change materials and products for building applications: a state-of-the-art review and future research opportunities, Energy Build., 94, 150, 10.1016/j.enbuild.2015.02.023 · DOI · Paper page
  92. Zhou, 2012, Review on thermal energy storage with phase change materials (PCMs) in building applications, Appl. Energy, 92, 593, 10.1016/j.apenergy.2011.08.025 · DOI · Paper page
  93. Cabeza, 2011, Materials used as PCM in thermal energy storage in buildings: a review, Renew. Sustain. Energy Rev., 15, 1675, 10.1016/j.rser.2010.11.018 · DOI · Paper page
  94. Baetens, 2010, Phase change materials for building applications: a state-of-the-art review, Energy Build., 42, 1361, 10.1016/j.enbuild.2010.03.026 · DOI · Paper page
  95. Zhu, 2009, Dynamic characteristics and energy performance of the buildings using phase change materials: a review, Energy Convers. Manag., 50, 3169, 10.1016/j.enconman.2009.08.019 · DOI
  96. Sharma, 2009, Review on thermal energy storage with phase change materials and applications, Renew. Sustain. Energy Rev., 13, 318, 10.1016/j.rser.2007.10.005 · DOI · Paper page
  97. Pasupathy, 2008, Phase change material-based building architecture for thermal management in residential and commercial establishments, Renew. Sustain. Energy Rev., 12, 39, 10.1016/j.rser.2006.05.010 · DOI · Paper page
  98. Zhang, 2007, Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook, II, Build. Environ., 42;6, 2197, 10.1016/j.buildenv.2006.07.023 · DOI · Paper page
  99. Tyagi, 2007, PCM thermal storage in buildings: a state of art, Renew. Sustain. Energy Rev., 11, 1146, 10.1016/j.rser.2005.10.002 · DOI · Paper page
  100. Zalba, 2003, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl. Therm. Eng., 23, 251, 10.1016/S1359-4311(02)00192-8 · DOI · Paper page
  101. Xie, 2018, Thermal performance analysis of PCM wallboards for building application based on numerical simulation, Sol. Energy, 162, 533, 10.1016/j.solener.2018.01.069 · DOI
  102. Singh, 2018, Performance evaluation of dual phase change material gypsum board for the reduction of temperature swings in a building prototype in composite climate, Energy Build., 159, 191, 10.1016/j.enbuild.2017.10.097 · DOI
  103. Scalat, 1996, Full scale thermal testing of latent heat storage in wallboard, Sol. Energy Mater. Sol. Cells, 44, 49, 10.1016/0927-0248(96)00017-7 · DOI
  104. Neeper, 2000, Thermal dynamics of wallboard with latent heat storage, Sol. Energy, 68, 393, 10.1016/S0038-092X(00)00012-8 · DOI
  105. Kuznik, 2008, Energetic efficiency of room wall containing PCM wallboard: a full-scale experimental investigation, Energy Build., 40, 148, 10.1016/j.enbuild.2007.01.022 · DOI · Paper page
  106. Kuznik, 2009, Experimental investigation of wallboard containing phase change material: data for validation of numerical modeling, Energy Build., 41, 561, 10.1016/j.enbuild.2008.11.022 · DOI · Paper page
  107. Ahmad, 2006, Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material, Energy Build., 38, 673, 10.1016/j.enbuild.2005.11.002 · DOI
  108. Evola, 2014, Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings, Energy Build., 70, 480, 10.1016/j.enbuild.2013.11.089 · DOI
  109. Diaconu, 2011, Thermal energy savings in buildings with PCM-enhanced envelope: influence of occupancy pattern and ventilation, Energy Build., 43, 101, 10.1016/j.enbuild.2010.08.019 · DOI
  110. Ascione, 2014, Energy refurbishment of existing buildings through the use of phase change materials: energy savings and indoor comfort in the cooling season, Appl. Energy, 113, 990, 10.1016/j.apenergy.2013.08.045 · DOI
  111. Shilei, 2007, Experimental study and evaluation of latent heat storagein phase change materials wallboards, Energy Build., 39, 1088, 10.1016/j.enbuild.2006.11.012 · DOI
  112. Koschenz, 2004, Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings, Energy Build., 36, 567, 10.1016/j.enbuild.2004.01.029 · DOI
  113. Wang, 2009, Performance of cooled-ceiling operating with MPCM slurry, Energy Convers. Manag., 50, 583, 10.1016/j.enconman.2008.10.021 · DOI
  114. A. Pasupathy, R. Velraj, Effect of double layer phase change material in building roof for year round thermal management 2008;40:193–203. doi:10.1016/j.enbuild.2007.02.016. · DOI
  115. Kosny, 2012, Field thermal performance of naturally ventilated solar roof with PCM heat sink, Sol. Energy, 86, 2504, 10.1016/j.solener.2012.05.020 · DOI
  116. Alawadhi, 2011, Building roof with conical holes containing PCM to reduce the cooling load: numerical study, Energy Convers. Manag., 52, 2958, 10.1016/j.enconman.2011.04.004 · DOI
  117. Roman, 2016, Simulating the effects of cool roof and PCM (phase change materials) based roof to mitigate UHI (urban heat island) in prominent US cities, Energy, 96, 103, 10.1016/j.energy.2015.11.082 · DOI
  118. A. Laura, V. Lucia, F. Cotana, Dynamic thermal-energy performance analysis of a prototype building with integrated phase change materials 2015;81:82–8. doi:10.1016/j.egypro.2015.12.062. · DOI
  119. Pisello, 2017, PCM for improving polyurethane-based cool roof membranes durability, Sol. Energy Mater. Sol. Cells, 160, 34, 10.1016/j.solmat.2016.09.036 · DOI
  120. Jayalath, 2016, Effects of phase change material roof layers on thermal performance of a residential building in Melbourne and Sydney, Energy Build., 121, 152, 10.1016/j.enbuild.2016.04.007 · DOI
  121. Weinläder, 2005, PCM-facade-panel for daylighting and room heating, Sol. Energy, 78, 177, 10.1016/j.solener.2004.04.013 · DOI
  122. Li, 2018, Simulation research on the dynamic thermal performance of a novel triple- glazed window filled with PCM, Sustain. Cities Soc., 40, 266, 10.1016/j.scs.2018.01.020 · DOI
  123. Hu, 2018, Energy & buildings a new ventilated window with PCM heat exchanger — performance analysis and design optimization, Energy Build., 169, 185, 10.1016/j.enbuild.2018.03.060 · DOI
  124. Ismail, 2008, Comparison between PCM filled glass windows and absorbing gas filled windows, Energy Build., 40, 710, 10.1016/j.enbuild.2007.05.005 · DOI
  125. Goia, 2013, Improving thermal comfort conditions by means of PCM glazing systems, Energy Build., 60, 442, 10.1016/j.enbuild.2013.01.029 · DOI
  126. Kolokotroni, 1998, Summer cooling with night ventilation for office buildings in moderate climates, Energy Build., 27, 231, 10.1016/S0378-7788(97)00048-0 · DOI
  127. Givoni, 1998, Effectiveness of mass and night ventilation in lowering the indoor daytime temperatures. Part I: 1993 experimental periods, Energy Build., 28, 25, 10.1016/S0378-7788(97)00056-X · DOI
  128. Zeinelabdein, 2018, Critical review of latent heat storage systems for free cooling in buildings, Renew. Sustain. Energy Rev., 82, 2843, 10.1016/j.rser.2017.10.046 · DOI
  129. Carrilho da Graça, 2002, Simulation of wind-driven ventilative cooling systems for an apartment building in Beijing and Shanghai, Energy Build., 34, 1, 10.1016/S0378-7788(01)00083-4 · DOI
  130. Fang, 2016, Preparation, microstructure and thermal properties of Mg-Bi alloys as phase change materials for thermal energy storage, Appl. Therm. Eng., 92, 187, 10.1016/j.applthermaleng.2015.09.090 · DOI
  131. Raj, 2010, Review on free cooling of the buildings using phase change materials, Renew. Sustain. Energy Rev., 14, 2819, 10.1016/j.rser.2010.07.004 · DOI
  132. Waqas, 2013, Phase change material (PCM) storage for free cooling of the buildings - a review, Renew. Sustain. Energy Rev., 18, 607, 10.1016/j.rser.2012.10.034 · DOI · Paper page
  133. Kamali, 2014, Review of free cooling system using phase change material for building, Energy Build., 80, 131, 10.1016/j.enbuild.2014.05.021 · DOI
  134. Thambidurai, 2015, Review on phase change material based free cooling of the buildings-the way toward sustainability, J. Energy Storage, 4, 74, 10.1016/j.est.2015.09.003 · DOI
  135. Turnpenny, 2000, Novel ventilation cooling system for reducing air conditioning in buildings.: part I: testing and theoretical modelling, Appl. Therm. Eng., 20, 1019, 10.1016/S1359-4311(99)00068-X · DOI
  136. Arkar, 2007, Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building, Int. J. Refrig., 30, 134, 10.1016/j.ijrefrig.2006.03.009 · DOI
  137. Waqas, 2011, Thermal performance of latent heat storage for free cooling of the buildings in a dry and hot climate: an experimental study, Energy Build., 43, 2621, 10.1016/j.enbuild.2011.06.015 · DOI
  138. Darzi, 2013, Numerical investigation of free-cooling system using plate type PCM storage, Int. Commun. Heat Mass Transf., 48, 155, 10.1016/j.icheatmasstransfer.2013.08.025 · DOI
  139. Mosaffa, 2013, Thermal performance optimization of free cooling systems using enhanced latent heat thermal storage unit, Appl. Therm. Eng., 59, 473, 10.1016/j.applthermaleng.2013.06.011 · DOI
  140. Daghigh, 2015, Assessing the thermal comfort and ventilation in Malaysia and the surrounding regions, Renew. Sustain. Energy Rev., 48, 682, 10.1016/j.rser.2015.04.017 · DOI
  141. Straw, 2000, Experimental measurements and computations of the wind-induced ventilation of a cubic structure, J. Wind Eng. Ind. Aerodyn., 88, 213, 10.1016/S0167-6105(00)00050-7 · DOI
  142. Mak, 2007, A numerical simulation of wing walls using computational fluid dynamics, Energy Build., 39, 995, 10.1016/j.enbuild.2006.10.012 · DOI
  143. Montero, 2001, Effect of ventilator configuration on wind-driven ventilation in a crop protection structure for the tropics, J. Agric. Eng. Res., 80, 99, 10.1006/jaer.2000.0694 · DOI
  144. Pfeiffer, 2008, Modelling of cowl performance in building simulation tools using experimental data and computational fluid dynamics, Build. Environ., 43, 1361, 10.1016/j.buildenv.2007.01.038 · DOI
  145. Khan, 2008, A review on wind driven ventilation techniques, Energy Build., 40, 1586, 10.1016/j.enbuild.2008.02.015 · DOI
  146. Calautit, 2016, A passive cooling wind catcher with heat pipe technology: CFD, wind tunnel and field-test analysis, Appl. Energy, 162, 460, 10.1016/j.apenergy.2015.10.045 · DOI
  147. Calautit, 2014, Integration and application of passive cooling within a wind tower for hot climates, HVAC R Res., 20, 722, 10.1080/10789669.2014.936795 · DOI
  148. Yik, 2010, Energy saving by utilizing natural ventilation in public housing in Hong Kong, Indoor Built Environ., 19, 73, 10.1177/1420326X09358021 · DOI
  149. Shanthi Priya, 2012, Experimental study on the thermal performance of a traditional house with one-sided wind catcher during summer and winter, Energy Effic., 5, 483, 10.1007/s12053-012-9155-9 · DOI
  150. Ghadiri, 2011, The effect of tower height in square plan wind catcher on its thermal behavior, Aust. J. Basic Appl. Sci., 5, 381
  151. Z. Ji, Y. Su, N. Khan, Performance evaluation and energy saving potential of windcatcher natural ventilation systems in China 2012;1:84–95. doi:10.7492/IJAEC.2012.010. · DOI
  152. Ismail, 2010, Comparison of different hybrid turbine ventilator (HTV) application strategies to improve the indoor thermal comfort, Int. J. Environ. Res., 4, 297
  153. Gao, 2011, Evaluating the influence of openings configuration on natural ventilation performance of residential units in Hong Kong, Build. Environ., 46, 961, 10.1016/j.buildenv.2010.10.029 · DOI
  154. Shetabivash, 2015, Investigation of opening position and shape on the natural cross ventilation, Energy Build., 93, 1, 10.1016/j.enbuild.2014.12.053 · DOI
  155. Evola, 2006, Computational analysis of wind driven natural ventilation in buildings, Energy Build., 38, 491, 10.1016/j.enbuild.2005.08.008 · DOI · Paper page
  156. Aflaki, 2015, A review on natural ventilation applications through building façade components and ventilation openings in tropical climates, Energy Build., 101, 153, 10.1016/j.enbuild.2015.04.033 · DOI · Paper page
  157. Hatamipour, 2008, Passive cooling systems in buildings: some useful experiences from ancient architecture for natural cooling in a hot and humid region, Energy Convers. Manag., 49, 2317, 10.1016/j.enconman.2008.01.018 · DOI
  158. Priyadarsini, 2004, Enhancement of natural ventilation in high-rise residential buildings using stack system, Energy Build., 36, 61, 10.1016/S0378-7788(03)00076-8 · DOI
  159. Prajongsan, 2012, Enhancing natural ventilation, thermal comfort and energy savings in high-rise residential buildings in Bangkok through the use of ventilation shafts, Build. Environ., 50, 104, 10.1016/j.buildenv.2011.10.020 · DOI
  160. Gratia, 2007, Guidelines for improving natural daytime ventilation in an office building with a double-skin facade, Sol. Energy, 81, 435, 10.1016/j.solener.2006.08.006 · DOI
  161. Saadatian, 2012, Trombe walls: a review of opportunities and challenges in research and development, Renew. Sustain. Energy Rev., 16, 6340, 10.1016/j.rser.2012.06.032 · DOI · Paper page
  162. Zamora, 2009, Thermal and dynamic optimization of the convective flow in trombe wall shaped channels by numerical investigation, Heat Mass Transf., 45, 1393, 10.1007/s00231-009-0509-6 · DOI
  163. Hu, 2017, A review on the application of Trombe wall system in buildings, Renew. Sustain. Energy Rev., 70, 976, 10.1016/j.rser.2016.12.003 · DOI
  164. Bodart, 2011, Architecture & sustainable development, Vol. 2
  165. Ji, 2007, PV-Trombe wall design for buildings in composite climates, J. Sol. Energy Eng., 129, 431, 10.1115/1.2770751 · DOI
  166. Peng, 2013, Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade, Appl. Energy, 112, 646, 10.1016/j.apenergy.2012.12.026 · DOI
  167. Abasova, 1972, Oligomerization of ethylene under the influence of bis-(π-allylnickel bromide) in conjunction with lewis acids, Bull. Acad Sci. USSR Div. Chem. Sci., 21, 608, 10.1007/BF00863224 · DOI
  168. Irshad, 2014, Energy and cost analysis of photo voltaic trombe wall system in tropical climate, Energy Procedia, 50, 71, 10.1016/j.egypro.2014.06.009 · DOI
  169. Stazi, 2012, Trombe wall management in summer conditions: an experimental study, Sol. Energy, 86, 2839, 10.1016/j.solener.2012.06.025 · DOI
  170. Ji, 2009, An improved approach for the application of Trombe wall system to building construction with selective thermo-insulation façades, Chin. Sci. Bull., 54, 1949, 10.1007/s11434-009-0353-6 · DOI
  171. Stazi, 2012, The behaviour of solar walls in residential buildings with different insulation levels: an experimental and numerical study, Energy Build., 47, 217, 10.1016/j.enbuild.2011.11.039 · DOI
  172. Li, 2014, Experimental study on thermal performance of a solar chimney combined with PCM, Appl. Energy, 114, 172, 10.1016/j.apenergy.2013.09.022 · DOI
  173. Saadatian, 2013, A state of the art review of solar walls: concepts and applications, J. Build. Phys., 37, 55, 10.1177/1744259113479336 · DOI
  174. Yang, 2000, Simple approach to cooling load component calculation through PV walls, Energy Build., 31, 285, 10.1016/S0378-7788(99)00041-9 · DOI
  175. Rabani, 2015, Empirical investigation of the cooling performance of a new designed Trombe wall in combination with solar chimney and water spraying system, Energy Build., 102, 45, 10.1016/j.enbuild.2015.05.010 · DOI
  176. Bacharoudis, 2007, Study of the natural convection phenomena inside a wall solar chimney with one wall adiabatic and one wall under a heat flux, Appl. Therm. Eng., 27, 2266, 10.1016/j.applthermaleng.2007.01.021 · DOI
  177. Miyazaki, 2006, The effects of solar chimneys on thermal load mitigation of office buildings under the Japanese climate, Renew. Energy, 31, 987, 10.1016/j.renene.2005.05.003 · DOI
  178. Shi, 2018, Determining the influencing factors on the performance of solar chimney in buildings, Renew. Sustain. Energy Rev., 88, 223, 10.1016/j.rser.2018.02.033 · DOI
  179. Monghasemi, 2018, A review of solar chimney integrated systems for space heating and cooling application, Renew. Sustain. Energy Rev., 81, 2714, 10.1016/j.rser.2017.06.078 · DOI
  180. Khedari, 2003, Field study performance of solar chimney with air-conditioned building, Energy, 28, 1099, 10.1016/S0360-5442(03)00092-6 · DOI
  181. Chungloo, 2007, Application of passive cooling systems in the hot and humid climate: the case study of solar chimney and wetted roof in Thailand, Build. Environ., 42, 3341, 10.1016/j.buildenv.2006.08.030 · DOI
  182. Punyasompun, 2009, Investigation on the application of solar chimney for multi-storey buildings, Renew. Energy, 34, 2545, 10.1016/j.renene.2009.03.032 · DOI
  183. Ramírez-Dávila, 2014, Numerical study of earth-to-air heat exchanger for three different climates, Energy Build., 76, 238, 10.1016/j.enbuild.2014.02.073 · DOI
  184. Rabani, 2014, Numerical simulation of an innovated building cooling system with combination of solar chimney and water spraying system, Heat Mass Transf., 50, 1609, 10.1007/s00231-014-1366-5 · DOI
  185. Amer, 2006, Passive options for solar cooling of the buildings in arid areas, Energy, 31, 1332, 10.1016/j.energy.2005.06.002 · DOI · Paper page
  186. Al-Jamal, 1994, Greenhouse cooling in hot countries, Energy, 1187, 10.1016/0360-5442(94)90075-2 · DOI
  187. Costelloe, 2003, Indirect evaporative cooling potential in air-water systems in temperate climates, Energy Build., 35, 573, 10.1016/S0378-7788(02)00161-5 · DOI
  188. Cuce, 2016, A state of the art review of evaporative cooling systems for building applications, Renew. Sustain. Energy Rev., 54, 1240, 10.1016/j.rser.2015.10.066 · DOI
  189. Riangvilaikul, 2010, An experimental study of a novel dew point evaporative cooling system, Energy Build., 42, 637, 10.1016/j.enbuild.2009.10.034 · DOI
  190. Daou, 2006, Desiccant cooling air conditioning: a review, Renew. Sustain. Energy Rev., 10, 55, 10.1016/j.rser.2004.09.010 · DOI · Paper page
  191. Fan, 2007, Review of solar sorption refrigeration technologies: development and applications, Renew. Sustain. Energy Rev., 11, 1758, 10.1016/j.rser.2006.01.007 · DOI · Paper page
  192. Dai, 2002, Theoretical study on a cross-flow direct evaporative cooler using honeycomb paper as packing material, Appl. Therm. Eng., 22, 1417, 10.1016/S1359-4311(02)00069-8 · DOI
  193. Camargo, 2005, Experimental performance of a direct evaporative cooler operating during summer in a Brazilian city, Int. J. Refrig., 28, 1124, 10.1016/j.ijrefrig.2004.12.011 · DOI
  194. Wu, 2009, Theoretical analysis on heat and mass transfer in a direct evaporative cooler, Appl. Therm. Eng., 29, 980, 10.1016/j.applthermaleng.2008.05.016 · DOI
  195. Wu, 2009, Numerical investigation on the heat and mass transfer in a direct evaporative cooler, Appl. Therm. Eng., 29, 195, 10.1016/j.applthermaleng.2008.02.018 · DOI
  196. Ibrahim, 2003, Performance of porous ceramic evaporators for building cooling application, Energy Build., 35, 941, 10.1016/S0378-7788(03)00019-7 · DOI
  197. Bishoyi, 2017, Experimental performance of a direct evaporative cooler in composite climate of India, Energy Build., 153, 190, 10.1016/j.enbuild.2017.08.014 · DOI
  198. Porumb, 2016, A review of indirect evaporative cooling operating conditions and performances, Energy Procedia, 85, 452, 10.1016/j.egypro.2015.12.226 · DOI
  199. Maheshwari, 2001, Energy-saving potential of an indirect evaporative cooler, Appl. Energy, 69, 69, 10.1016/S0306-2619(00)00066-0 · DOI
  200. Hajidavalloo, 2007, Application of evaporative cooling on the condenser of window-air-conditioner, Appl. Therm. Eng., 27, 1937, 10.1016/j.applthermaleng.2006.12.014 · DOI

200 of 226 shown

Cited by

See all 277

Metadata

Authors
Bhamare, D. K., Rathod, M. K., & Banerjee, J.
Venue
Energy and Buildings
Publisher
Elsevier BV
Published
2019-09
Volume
198
Pages
467-490
ISSN
0378-7788 (ISSN-L)
DOI
10.1016/j.enbuild.2019.06.023
OpenAlex
W2951277102
Cited by
277
References
4
FWCI
18.57
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.