The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Catalytic cracking of biomass pyrolysis tar over char-supported catalysts
Abstract
The work aims to investigate an effective method of catalytic reforming of tar during biomass high-temperature pyrolysis using rice husk char (RHC) and metal impregnated (Fe, Cu and K) char in a dual-stage reactor. The char and char-supported catalysts exhibited high catalytic performance, in terms of the high tar conversion efficiencies of 77.1% for RHC, 82.7% for K-RHC, 92.6% for Fe-RHC and 90.6% for Cu-RHC at 800 °C. Moreover, K-RHC and Cu-RHC catalysts after three cycles still exhibited high activity for tar removal. The catalytic tar conversion by char or char-supported catalysts contributes to improving the yield of syngas, particularly the combustible gases of H2, CO and CH4, corresponding to the syngas yield increasing from 196.6 mL/g for thermal reforming to 269.6 mL/g for K-RHC, 274.9 mL/g for Cu-RHC and 342.7 mL/g for Fe-RHC at 800 °C, respectively. The results from GC–MS analysis illustrated that the addition of char and char-supported catalysts promoted the transformation of larger polycyclic aromatic hydrocarbons into lighter tar compounds, leading to an increase in the proportion of single-ring tars. XRD results indicated that the most active phases of the fresh K-RHC, Cu-RHC and Fe-RHC for tar cracking and reforming were KCl, Cu and Fe, respectively. Textural characterization showed the addition of Fe and Cu was in favor of producing highly porous carbon materials and led to the increase in specific surface area and total pore volume.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic steam reforming of biomass tar: Prospects and challenges
Guan, G., Kaewpanha, M., Hao, X., & Abudula, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.316 · Cited by 662
Shen, Y., Zhao, P., Shao, Q., Ma, D., Takahashi, F., & Yoshikawa, K. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.01.032 · Cited by 426
Chen, Y., Zhu, Y., Wang, Z., Li, Y., Wang, L., Ding, L., Gao, X., Ma, Y., & Guo, Y. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.01.006 · Cited by 394
Pyrolysis products from different biomasses
Fagbemi, L., Khezami, L., & Capart, R. (2001) · Applied Energy · doi:10.1016/s0306-2619(01)00013-7 · Cited by 388
Shen, Y. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.061 · Cited by 387
The removal of carbon monoxide by iron oxide nanoparticles
Li, P., Miser, D. E., Rabiei, S., Yadav, R. T., & Hajaligol, M. R. (2003) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(02)00297-7 · Cited by 383
The effect of temperature on various parameters in coal, biomass and CO-gasification: A review
Emami Taba, L., Irfan, M. F., Wan Daud, W. A. M., & Chakrabarti, M. H. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.06.015 · Cited by 363
Ji-lu, Z. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.12.030 · Cited by 320
Cazetta, A. L., Pezoti, O., Bedin, K. C., Silva, T. L., Paesano Junior, A., Asefa, T., & Almeida, V. C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01141 · Cited by 312
Effect of essential inorganic metals on primary thermal degradation of lignocellulosic biomass
Eom, I.-Y., Kim, J.-Y., Kim, T.-S., Lee, S.-M., Choi, D., Choi, I.-G., & Choi, J.-W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.035 · Cited by 311
Wang, L., Li, D., Koike, M., Watanabe, H., Xu, Y., Nakagawa, Y., & Tomishige, K. (2013) · Fuel · doi:10.1016/j.fuel.2012.01.073 · Cited by 250
Review of the Recent Chemical Looping Process Developments for Novel Energy and Fuel Applications
Moghtaderi, B. (2012) · Energy & Fuels · doi:10.1021/ef201303d · Cited by 249
Hu, S., Jiang, L., Wang, Y., Su, S., Sun, L., Xu, B., He, L., & Xiang, J. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.042 · Cited by 244
Min, Z., Yimsiri, P., Asadullah, M., Zhang, S., & Li, C.-Z. (2011) · Fuel · doi:10.1016/j.fuel.2011.03.027 · Cited by 241
Shen, Y., Zhao, P., Shao, Q., Takahashi, F., & Yoshikawa, K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.074 · Cited by 224
Feng, D., Zhao, Y., Zhang, Y., Xu, H., Zhang, L., & Sun, S. (2018) · Fuel · doi:10.1016/j.fuel.2017.10.045 · Cited by 218
Char and char-supported nickel catalysts for secondary syngas cleanup and conditioning
Wang, D., Yuan, W., & Ji, W. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.11.041 · Cited by 213
Lu, Q., Xiong, W.-M., Li, W.-Z., Guo, Q.-X., & Zhu, X.-F. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.068 · Cited by 203
Steam reforming of tar compounds over Ni/olivine catalysts doped with CeO2
Zhang, R. Q., Wang, Y., & Brown, R. C. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.001 · Cited by 195
Steam reforming of different biomass tar model compounds over Ni/Al2O3 catalysts
Artetxe, M., Alvarez, J., Nahil, M. A., Olazar, M., & Williams, P. T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.092 · Cited by 194
Zhang, S., Dong, Q., Zhang, L., & Xiong, Y. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.114 · Cited by 192
Catalytic destruction of tar in biomass derived producer gas
Zhang, R. Q., Brown, R. C., Suby, A. A., & Cummer, K. (2003) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.08.016 · Cited by 189
Virginie, M., Courson, C., Niznansky, D., Chaoui, N., & Kiennemann, A. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.09.011 · Cited by 188
Gai, C., Zhang, F., Lang, Q., Liu, T., Peng, N., & Liu, Z. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.12.005 · Cited by 174
By-products recycling for syngas cleanup in biomass pyrolysis – An overview
Shen, Y., Wang, J., Ge, X., & Chen, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.077 · Cited by 159
Performance of tar removal by absorption and adsorption for biomass gasification
Paethanom, A., Nakahara, S., KOBAYASHI, M., Prawisudha, P., & Yoshikawa, K. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.05.006 · Cited by 156
Qiang, L., Li, W., Dong, Z., & Xi-feng, Z. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.01.002 · Cited by 144
Pyrolysis products from industrial waste biomass based on a neural network model
Sun, Y., Liu, L., Wang, Q., Yang, X., & Tu, X. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.04.013 · Cited by 136
Catalytic reforming of pyrolysis tar over metallic nickel nanoparticles embedded in pyrochar
Shen, Y., Chen, M., Sun, T., & Jia, J. (2015) · Fuel · doi:10.1016/j.fuel.2015.07.007 · Cited by 122
Novel Method for Preparing Activated Carbons with High Specific Surface Area from Rice Husk
Song, X., Zhang, Y., & Chang, C. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3012853 · Cited by 120
Hot char-catalytic reforming of volatiles from MSW pyrolysis
Wang, N., Chen, D., Arena, U., & He, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.051 · Cited by 119
Influence of temperature and alumina catalyst on pyrolysis of corncob
Ateş, F., & Işıkdağ, M. A. (2009) · Fuel · doi:10.1016/j.fuel.2009.03.008 · Cited by 117
The effect of sodium chloride on the pyrolysis of rice husk
Zhao, N., & Li, B. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.082 · Cited by 106
Shen, Y., & Yoshikawa, K. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie501843y · Cited by 101
Catalytic Effects of Metal Chlorides on the Pyrolysis of Lignite
Zou, X., Yao, J., Yang, X., Song, W., & Lin, W. (2007) · Energy & Fuels · doi:10.1021/ef060477h · Cited by 97
Effects of Chinese dolomites on tar cracking in gasification of birch
Yu, Q., Brage, C., Nordgreen, T., & Sjöström, K. (2009) · Fuel · doi:10.1016/j.fuel.2009.04.020 · Cited by 91
Pyrolysis kinetics and behavior of potassium-impregnated pine wood in TGA and a fixed-bed reactor
Guo, F., Liu, Y., Wang, Y., Li, X., Li, T., & Guo, C. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.055 · Cited by 82
Self-citationLi, D., Ishikawa, C., Koike, M., Wang, L., Nakagawa, Y., & Tomishige, K. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.057 · Cited by 81
Reduction and oxidation kinetics of different phases of iron oxides
Jeong, M. H., Lee, D. H., & Bae, J. W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.099 · Cited by 74
Spontaneous Generation of Tar Decomposition Promoter in a Biomass Steam Reformer
Hosokai, S., Hayashi, J., Shimada, T., Kobayashi, Y., Kuramoto, K., Li, C., & Chiba, T. (2005) · Process Safety and Environmental Protection · doi:10.1205/cherd.04101 · Cited by 73
Feng, D., Zhang, Y., Zhao, Y., & Sun, S. (2018) · Energy · doi:10.1016/j.energy.2018.03.119 · Cited by 73
Zhang, Y.-L., Wu, W., Zhao, S., Long, Y., & Luo, Y. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.01.047 · Cited by 70
Plasma-assisted catalytic reforming of toluene to hydrogen rich syngas
Liu, L., Wang, Q., Song, J., Ahmad, S., Yang, X., & Sun, Y. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00970d · Cited by 63
Gasification and tar removal characteristics of rice husk in a bubbling fluidized bed reactor
Kook, J. W., Choi, H. M., Kim, B. H., et al. (2016) · Fuel · doi:10.1016/j.fuel.2016.05.027 · Cited by 62
Shen, Y., Areeprasert, C., Prabowo, B., Takahashi, F., & Yoshikawa, K. (2014) · RSC Advances · doi:10.1039/c4ra07760a · Cited by 53
Liu, B., Gu, J., & Zhou, J. (2015) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.12215 · Cited by 49
Wang, Y., Jiang, L. K., Hu, S., Su, S., Zhou, Y., Xiang, J. H., Zhang, S., & Li, C. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.01.002 · Cited by 46
Catalytic reforming of tar using corncob char and char-supported potassium catalysts
Guo, F., Liu, Y., Liu, Y., & Guo, C. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6420-3 · Cited by 29
Self-citationCo-gasification of black liquor and pyrolysis oil at high temperature: Part 2. Fuel conversion
Bach-Oller, A., Kirtania, K., Furusjö, E., & Umeki, K. (2017) · Fuel · doi:10.1016/j.fuel.2017.01.108 · Cited by 27
Steam reforming of biomass tar over calcined egg shell supported catalysts for hydrogen production
Yang, J., Kaewpanha, M., Karnjanakom, S., Guan, G., Hao, X., & Abudula, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.03.056 · Cited by 25
Cited by
Lepage, T., Kammoun, M., Schmetz, Q., & Richel, A. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105920 · Cited by 566
Wang, W., Lemaire, R., Bensakhria, A., & Luart, D. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105479 · Cited by 429
Wan, Z., Sun, Y., Tsang, D. C. W., Yu, I. K. M., Fan, J., Clark, J. H., Zhou, Y., Cao, X., Gao, B., & Ok, Y. S. (2019) · Green Chemistry · doi:10.1039/c9gc01843c · Cited by 260
Metadata
- Authors
- Guo, F., Li, X., Liu, Y., Peng, K., Guo, C., & Rao, Z.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 167
- Pages
- 81-90
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2802778439
- Cited by
- 283
- References
- 50
- FWCI
- 11.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.