The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Catalytic microwave-assisted pyrolysis of plastic waste over NiO and HY for gasoline-range hydrocarbons production
Abstract
Abstract Recovering fuels or chemicals from plastic waste via pyrolysis is an innovative and promising route for both energy saving and refuse elimination. In this study, catalytic microwave-assisted pyrolysis of low-density polyethylene (LDPE) was performed to simultaneously improve yield and quality of gasoline-range products. NiO and HY zeolite were respectively used as in-situ and ex-situ catalysts in a two-stage pyrolysis-catalysis system. The results showed that the optimum pyrolysis and catalysis temperatures were 500 °C and 450 °C, respectively, with 56.53 wt% oil product and 93.80% gasoline-range fraction achieved. The content of high-octane-number compounds, primarily aromatics and isomerized aliphatics, increased from 23.5% to 80.4% as HY to LDPE ratio rose from 0 to 1:5. The optimized balance between oil yield and oil quality was obtained at the HY to LDPE ratio of 1:10. The presence of NiO during co-catalysis slightly decreased the oil yield by 5.3–8.5 wt%. Meanwhile, the production of aromatics was promoted obviously while the yield of normal aliphatics was inhibited, which were both favorable to improve the octane number of the oil product. The improved performance of co-catalysis could be related to the suitable hydrogen abstraction ability of NiO, which produced enormous alkenes. Subsequently, cycloalkenes and aromatics were synthesized through Diels-Alder reactions over the catalysis of HY. This co-catalysis approach in the microwave reactor provides a potentially profitable way to convert plastic waste into high-quality and high-yield gasoline fuels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Chen, D., Gao, A., Cen, K., Zhang, J., Cao, X., & Ma, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.05.063 · Cited by 521
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 493
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
Yao, D., Yang, H., Chen, H., & Williams, P. T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.01.050 · Cited by 250
Seo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233
Acomb, J. C., Wu, C., & Williams, P. T. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.09.018 · Cited by 196
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 195
Self-citationEfficient disposal of waste polyolefins through microwave assisted pyrolysis
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 182
Dai, L., He, C., Wang, Y., Liu, Y., Yu, Z., Zhou, Y., Fan, L., Duan, D., & Ruan, R. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.007 · Cited by 179
Self-citationAn overview of a novel concept in biomass pyrolysis: microwave irradiation
Zhang, X., Rajagopalan, K., Lei, H., Ruan, R., & Sharma, B. K. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00254h · Cited by 170
Self-citationUeno, T., Nakashima, E., & Takeda, K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.020 · Cited by 162
Handbook of Industrial Hydrocarbon Processes
Speight, J. G. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-18464-7 · Cited by 159
Reverse polymerization of waste polystyrene through microwave assisted pyrolysis
Undri, A., Frediani, M., Rosi, L., & Frediani, P. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.001 · Cited by 145
Microwave-assisted pyrolysis of HDPE using an activated carbon bed
Russell, A. D., Antreou, E. I., Lam, S. S., Ludlow-Palafox, C., & Chase, H. A. (2012) · RSC Advances · doi:10.1039/c2ra20859h · Cited by 132
Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic
Kunwar, B., Moser, B. R., Chandrasekaran, S. R., Rajagopalan, N., & Sharma, B. K. (2016) · Energy · doi:10.1016/j.energy.2016.06.024 · Cited by 127
Wang, J., Cao, J., Zhao, X.-Y., Liu, S.-N., Ren, X.-Y., Zhao, M. M., Cui, X. Y., Chen, Q., & Wei, X. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.059 · Cited by 121
Self-citationThermolysis of low density polyethylene catalysed by zeolites
Mordi, R. C., Fields, R., & Dwyer, J. (1994) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(93)00789-p · Cited by 120
Conversion of waste plastics into fuels Recycling polyethylene in FCC
de la Puente, G. (2002) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(01)00287-9 · Cited by 118
Robinson, J. P., Dodds, C., Stavrinides, A. J., Kingman, S., Katrib, J., Wu, Z., Medrano, J. A., & Overend, R. P. (2015) · Energy & Fuels · doi:10.1021/ef502403x · Cited by 106
Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor
Elordi, G., Olazar, M., Aguado, R., López, G., Arabiourrutia, M., & Bilbao, J. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.010 · Cited by 100
Gu, B., Cao, J., Wei, F. X., Zhao, X.-Y., Ren, X.-Y., Zhu, C., Guo, Z., Bai, J. F., Shen, W., & Wei, X. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.005 · Cited by 88
Microwave‐Assisted Pyrolysis of Biomass for Bio‐Oil Production
Zhang, Y., Chen, P. L., Liu, S., Fan, L., Zhou, N., Min, M., Cheng, Y., Peng, P., Anderson, E., Wang, Y., et al. (2017) · InTech eBooks · doi:10.5772/67442 · Cited by 82
Self-citationWang, Y., Wu, Q., Yang, S., Yang, Q., Wu, J., Ma, Z., Jiang, L., Yu, Z., Dai, L., Liu, Y., et al. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.101 · Cited by 78
Self-citationFuel from microwave assisted pyrolysis of waste multilayer packaging beverage
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2014.04.092 · Cited by 76
From plastics to jet fuel range alkanes via combined catalytic conversions
Zhang, X., Lei, H., Zhu, L., Qian, M., Yadavalli, G., Wu, J. Q., & Chen, S. (2016) · Fuel · doi:10.1016/j.fuel.2016.10.015 · Cited by 74
Scale-up of microwave heating process for the production of bio-oil from sewage sludge
Lin, Q., Chen, G., & Liu, Y. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.014 · Cited by 72
Ding, K., Zhong, Z., Zhang, B., Wang, J., Min, A., & Ruan, R. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.10.023 · Cited by 71
Self-citationPyrolysis of palm kernel shell with internal recycling of heavy oil
Huang, Y. D., Gao, Y., Zhou, H., Sun, H., Zhou, J., & Zhang, S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.10.006 · Cited by 62
Self-citationOil production from microwave-assisted pyrolysis of a low rank American brown coal
Zhang, Y., Liu, S., Fan, L., Zhou, N., Omar, M. M., Peng, P., Anderson, E., Addy, M., Cheng, Y., Liu, Y., et al. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.004 · Cited by 61
Self-citationZhang, B., Zhong, Z., Li, T., Xue, Z., Wang, X., & Ruan, R. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.02.007 · Cited by 61
Self-citationWang, J. C., Zhong, Z., Song, Z., Ding, K., & Deng, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.06.024 · Cited by 52
Self-citationEffect of catalyst properties on the cracking of polypropylene pyrolysis waxes under FCC conditions
Arandes, J. M., Torre, I., Azkoiti, M. J., Castaño, P., Bilbao, J., & de Lasa, H. (2008) · Catalysis Today · doi:10.1016/j.cattod.2007.12.080 · Cited by 48
Synthesis of high-density jet fuel from plastics via catalytically integral processes
Zhang, X., & Lei, H. (2016) · RSC Advances · doi:10.1039/c5ra25327f · Cited by 45
Techno-Economic Analysis of Microwave-Assisted Pyrolysis for Production of Biofuels
Wang, L., Lei, H., & Ruan, R. R. (2014) · Biofuels and biorefineries · doi:10.1007/978-94-017-9612-5_12 · Cited by 37
Self-citationThe thermal degradation kinetics of polypropylene: Part II. Time-temperature superposition
Chan, J. H., & Balke, S. T. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00159-0 · Cited by 30
Cited by
Chemical and biological catalysis for plastics recycling and upcycling
Ellis, L. D., Rorrer, N. A., Sullivan, K. P., Otto, M., McGeehan, J. E., Román-Leshkov, Y., Wierckx, N., & Beckham, G. T. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00648-4 · Cited by 1,201
Wang, H., Li, X., Zhao, X., Li, C., Song, X., Zhang, P., Huo, P., & Li, X. (2022) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(21)63910-4 · Cited by 826
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Self-citationCurrent technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Metadata
- Authors
- Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 196
- Pages
- 1316-1325
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2954128189
- Cited by
- 294
- References
- 43
- FWCI
- 10.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.