A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques
The DOI matches its Crossref record; 152 of the 152 references it cites were found in a registry or an index.
Abstract
Abstract Durability is one of the most significant technical barriers to successful commercialization of polymer electrolyte membrane (PEM) fuel cells for practical vehicular applications. It is determined by the aging (degradation) and malfunction of various components during the long-term operation. Therefore, understanding the mechanisms of degradation modes in different components is crucial to the development of high-performing and long-lasting PEM fuel cells. In this review article, the critical degradation modes in major cell components, including membranes, catalyst layers, gas diffusion layers, and distribution plates, are comprehensively reviewed and analyzed, and the potential causes are described. Advanced experimental techniques to investigate the PEM fuel cell degradation modes reported in literature include steady-state durability tests and accelerated stress tests (ASTs). The steady-state durability test is straightforward but time-consuming and costly; therefore, ASTs are often applied to accelerate durability testing. For comparable results among different research studies, the experimental protocols and conditions have to be consistent, and the details of these experimental techniques are systematically reviewed in this article. The experimental results with a focus on the degradation modes, degradation rate, and test time of the PEM fuel cells have been reported. Finally, in order to understand the root causes of degradation modes and to develop the mitigation strategies, ex-situ ASTs in literature have been reviewed, including the effects of cyclic temperature, humidity, water wet-dry, freeze-thaw, clamping stress, and vibration operations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
A review on non-precious metal electrocatalysts for PEM fuel cells
Chen, Z., Higgins, D., Yu, A., Zhang, L., & Zhang, J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00558d · Cited by 1,832
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Instability of Pt∕C Electrocatalysts in Proton Exchange Membrane Fuel Cells
Ferreira, P. J., la O’, G. J., Shao-Horn, Y., Morgan, D., Makharia, R., Kocha, S., & Gasteiger, H. A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2050347 · Cited by 1,491
Sintering of Catalytic Nanoparticles: Particle Migration or Ostwald Ripening?
Hansen, T. W., DeLaRiva, A. T., Challa, S. R., & Datye, A. K. (2013) · Accounts of Chemical Research · doi:10.1021/ar3002427 · Cited by 1,474
Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell
Shao, Y., Yin, G., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.004 · Cited by 1,197
A review of water flooding issues in the proton exchange membrane fuel cell
Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J., Wang, H., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.068 · Cited by 1,026
Review: Durability and Degradation Issues of PEM Fuel Cell Components
de Bruijn, F. A., Dam, V. A. T., & Janssen, G. J. M. (2008) · Fuel Cells · doi:10.1002/fuce.200700053 · Cited by 1,001
Review of bipolar plates in PEM fuel cells: Flow-field designs
Li, X., & Sabir, I. (2004) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2004.09.019 · Cited by 994
Self-citationA review of the main parameters influencing long-term performance and durability of PEM fuel cells
Schmittinger, W., & Vahidi, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.070 · Cited by 819
Aging mechanisms and lifetime of PEFC and DMFC
Knights, S. D., Colbow, K. M., St-Pierre, J., & Wilkinson, D. P. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.033 · Cited by 753
Metal bipolar plates for PEM fuel cell—A review
Tawfik, H., Hung, Y., & Mahajan, D. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.088 · Cited by 723
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Zhang, S., Yuan, X.-Z., Hin, J. N. C., Wang, H., Friedrich, K. A., & Schulze, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.073 · Cited by 661
Pei, P., & Chen, H. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.048 · Cited by 616
A review of accelerated stress tests of MEA durability in PEM fuel cells
ZHANG, S., YUAN, X., WANG, H., MERIDA, W., ZHU, H., SHEN, J., WU, S., & ZHANG, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.012 · Cited by 525
A quick evaluating method for automotive fuel cell lifetime
PEI, P., CHANG, Q., & TANG, T. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.04.048 · Cited by 518
Metallic bipolar plates for PEM fuel cells
Wind, J., Späh, R., Kaiser, W., & Böhm, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00950-8 · Cited by 419
Metallic Mesoporous Nanocomposites for Electrocatalysis
Ding, Y., Chen, M., & Erlebacher, J. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0320119 · Cited by 414
Surface Area Loss of Supported Platinum in Polymer Electrolyte Fuel Cells
Wilson, M. S., Garzon, F. H., Sickafus, K. E., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220925 · Cited by 411
Li, X. (2005) · CRC Press eBooks · doi:10.1201/9780203942338 · Cited by 387
Self-citationDurability of PEFCs at High Humidity Conditions
Xie, J., Wood, D. L., Wayne, D. M., Zawodzinski, T. A., Atanassov, P., & Borup, R. L. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1830355 · Cited by 382
Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability
Huang, X., Solasi, R., Zou, Y., Feshler, M., Reifsnider, K., Condit, D., Burlatsky, S., & Madden, T. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20863 · Cited by 369
Kreuer, K. D., Schuster, M., Obliers, B., Diat, O., Traub, U., Fuchs, A., Klock, U., Paddison, S. J., & Maier, J. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.11.011 · Cited by 365
Offer, G. J. (2009) · Platinum Metals Review · doi:10.1595/147106709x474361 · Cited by 361
Fuel cell catalyst degradation on the nanoscale
Mayrhofer, K. J. J., Meier, J. C., Ashton, S. J., Wiberg, G. K. H., Kraus, F., Hanzlik, M., & Arenz, M. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.05.032 · Cited by 358
A review of polymer electrolyte membrane fuel cell durability test protocols
Yuan, X.-Z., Li, H., Zhang, S., Martin, J., & Wang, H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.082 · Cited by 354
The Role of Platinum in Proton Exchange Membrane Fuel Cells
Holton, O. T., & Stevenson, J. W. (2013) · Platinum Metals Review · doi:10.1595/147106713x671222 · Cited by 353
Carbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests
Macauley, N., Papadias, D. D., Fairweather, J., Spernjak, D., Langlois, D., Ahluwalia, R., More, K. L., Mukundan, R., & Borup, R. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0061806jes · Cited by 341
Degradation Study of MEA for PEMFCs under Low Humidity Conditions
Endoh, E., Terazono, S., Widjaja, H., & Takimoto, Y. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1739314 · Cited by 321
Use of stainless steel for cost competitive bipolar plates in the SPFC
Makkus, R. C., Janssen, A. H. H., de Bruijn, F. A., & Mallant, R. K. A. M. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00460-7 · Cited by 300
Dietmair, A., & Verl, A. (2009) · International Journal of Sustainable Engineering · doi:10.1080/19397030902947041 · Cited by 272
Fowler, M. W., Mann, R. F., Amphlett, J. C., Peppley, B. A., & Roberge, P. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01029-1 · Cited by 268
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
Yan, Q., Toghiani, H., Lee, Y.-W., Liang, K., & Causey, H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.075 · Cited by 263
Lim, C., Ghassemzadeh, L., Van Hove, F., Lauritzen, M., Kolodziej, J., Wang, G. G., Holdcroft, S., & Kjeang, E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.106 · Cited by 258
A polymer electrolyte fuel cell life test: 3 years of continuous operation
Cleghorn, S. J. C., Mayfield, D. K., Moore, D. A., Moore, J. C., Rusch, G., Sherman, T. W., Sisofo, N. T., & Beuscher, U. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.09.062 · Cited by 253
Liu, D., & Case, S. W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.007 · Cited by 218
A review of durability test protocols of the proton exchange membrane fuel cells for vehicle
Chen, H., Song, Z., Zhao, X., Zhang, T., Pei, P., & Liang, C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.050 · Cited by 216
Durability of Perfluorosulfonic Acid and Hydrocarbon Membranes: Effect of Humidity and Temperature
Sethuraman, V. A., Weidner, J. W., Haug, A. T., & Protsailo, L. V. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2806798 · Cited by 205
Stresses and their impacts on proton exchange membrane fuel cells: A review
Dafalla, A. M., & Jiang, F. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.033 · Cited by 202
Proton exchange membranes based on the short-side-chain perfluorinated ionomer
Ghielmi, A., Vaccarono, P., Troglia, C., & Arcella, V. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.12.068 · Cited by 200
Tseng, C., & Lo, S.-K. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.11.011 · Cited by 196
High Performance Perfluoropolymer Films and Membranes
ARCELLA, V., GHIELMI, A., & TOMMASI, G. (2003) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2003.tb06002.x · Cited by 187
System integration, durability and reliability of fuel cells: Challenges and solutions
Wang, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.083 · Cited by 185
Kim, S., & Mench, M. M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.111 · Cited by 175
Effects of Deep Temperature Cycling on Nafion® 112 Membranes and Membrane Electrode Assemblies
McDonald, R. C., Mittelsteadt, C. K., & Thompson, E. L. (2004) · Fuel Cells · doi:10.1002/fuce.200400015 · Cited by 174
In Situ Analysis of Performance Degradation of a PEMFC under Nonsaturated Humidification
Yu, J., Matsuura, T., Yoshikawa, Y., Islam, M. N., & Hori, M. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1854781 · Cited by 173
Three dimensional, two phase flow mathematical model for PEM fuel cell: Part I. Model development
Hu, M., Gu, A., Wang, M., Zhu, X., & Yu, L. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.022 · Cited by 168
The effect of humidity and oxygen partial pressure on degradation of Pt/C catalyst in PEM fuel cell
Bi, W., Sun, Q., Deng, Y., & Fuller, T. F. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2008.10.008 · Cited by 167
Stassi, A., Gatto, I., Passalacqua, E., Antonucci, V., Arico, A. S., Merlo, L., Oldani, C., & Pagano, E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.084 · Cited by 167
Kim, S., Ahn, B. K., & Mench, M. M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.114 · Cited by 162
Lin, R., Li, B., Hou, Y. P., & Ma, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.054 · Cited by 161
Pizzutilo, E., Geiger, S., Grote, J.-P., Mingers, A., Mayrhofer, K. J. J., Arenz, M., & Cherevko, S. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0731614jes · Cited by 160
Nandjou, F., Poirot-Crouvezier, J.-P., Chandesris, M., Blachot, J.-F., Bonnaud, C., & Bultel, Y. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.004 · Cited by 156
Mukundan, R., Baker, A. M., Kusoglu, A., Beattie, P. D., Knights, S., Weber, A. Z., & Borup, R. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0101806jes · Cited by 156
DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols
Garland, N., Benjamin, T., & Kopasz, J. (2007) · ECS Transactions · doi:10.1149/1.2781004 · Cited by 153
Analysis of the role of the microporous layer in improving polymer electrolyte fuel cell performance
Zhou, J., Shukla, S., Putz, A. M. V., & Secanell, M. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.02.100 · Cited by 147
Electrochemical Ostwald ripening of Pt and Ag catalysts supported on carbon
Parthasarathy, P., & Virkar, A. V. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.115 · Cited by 146
(2004) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(04)80620-9 · Cited by 142
Degradation mechanism of electrocatalyst during long-term operation of PEMFC
Chung, C. G., Kim, L. C., Sung, Y. W., Lee, J., & Chung, J. S. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.08.094 · Cited by 139
Viscoelastic Stress Analysis of Constrained Proton Exchange Membranes Under Humidity Cycling
Lai, Y.-H., Mittelsteadt, C. K., Gittleman, C. S., & Dillard, D. (2009) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.2971045 · Cited by 137
Temperature Effects on PEM Fuel Cells Pt∕C Catalyst Degradation
Bi, W., & Fuller, T. F. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2819680 · Cited by 137
The Impact of Cycle Profile on PEMFC Durability
Uchimura, M., & Kocha, S. S. (2007) · ECS Transactions · doi:10.1149/1.2781035 · Cited by 133
Analysis of PEMFC freeze degradation at −20°C after gas purging
Hou, J., Yu, H., Zhang, S., Sun, S., Wang, H., Yi, B., & Ming, P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.010 · Cited by 129
Gas-Crossover and Membrane-Pinhole Effects in Polymer-Electrolyte Fuel Cells
Weber, A. Z. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2898130 · Cited by 122
Qin, Y., Du, Q., Fan, M., Chang, Y., & Yin, Y. S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.035 · Cited by 120
Hyflon Ion Membranes for Fuel Cells
Arcella, V., Troglia, C., & Ghielmi, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie058008a · Cited by 119
Singh, Y., White, R. T., Najm, M., Haddow, T., Pan, V., Orfino, F. P., Dutta, M., & Kjeang, E. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.049 · Cited by 118
Accelerated durability testing via reactants relative humidity cycling on PEM fuel cells
Panha, K., Fowler, M. W., Yuan, X., & Wang, H. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.05.011 · Cited by 117
Jiang, Y., Yang, Z., Jiao, K., & Du, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.03.002 · Cited by 116
A One-Dimensional Pt Degradation Model for Polymer Electrolyte Fuel Cells
Li, Y., Moriyama, K., Gu, W., Arisetty, S., & Wang, C. Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0101508jes · Cited by 114
Catalyst Microstructure Examination of PEMFC Membrane Electrode Assemblies vs. Time
Cheng, X., Chen, L., Cheng, P., Chen, Z., Zhang, Y., & Fan, Q. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1625944 · Cited by 113
Effect of freeze-thaw cycles on the properties and performance of membrane-electrode assemblies
Guo, Q., & Qi, Z. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.093 · Cited by 112
Effect of cathode GDL characteristics on mass transport in PEM fuel cells
Park, S., & Popov, B. N. (2009) · Fuel · doi:10.1016/j.fuel.2009.06.020 · Cited by 112
Marrony, M., Barrera, R., Quenet, S., Ginocchio, S., Montelatici, L., & Aslanides, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.096 · Cited by 112
Full-scale co-firing of straw and coal
Pedersen, L. S., Nielsen, H. P., Kiil, S., Hansen, L. A., Dam‐Johansen, K., Kildsig, F., Christensen, J., & Jespersen, P. H. (1996) · Fuel · doi:10.1016/0016-2361(96)82642-1 · Cited by 111
Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling
Rong, F., Huang, C. L., Liu, Z., Song, D., & Wang, Q. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.10.006 · Cited by 110
Zhu, J., Xiao, M., Song, P., Fu, J., Jin, Z., Ma, L., Ge, J., Liu, C., Chen, Z., & Xing, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.021 · Cited by 110
Ionomer Degradation in Polymer Electrolyte Membrane Fuel Cells
Young, A. P., Stumper, J., Knights, S., & Gyenge, E. L. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3281899 · Cited by 109
30,000 h operation of a 70 kW stationary PEM fuel cell system using hydrogen from a chlorine factory
Verhage, A. J. L., Coolegem, J. F., Mulder, M. J. J., Yildirim, M. H., & de Bruijn, F. A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.152 · Cited by 107
Jiao, K., Alaefour, I. E., & Li, X. (2010) · Fuel · doi:10.1016/j.fuel.2010.10.018 · Cited by 104
Self-citationKneer, A., Janković, J., Susac, D., Putz, A. M. V., Wagner, N., Sabharwal, M., & Secanell, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0271806jes · Cited by 104
Sharma, R., & Andersen, S. M. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b00002 · Cited by 103
Understanding the voltage reversal behavior of automotive fuel cells
Mandal, P., Hong, B. K., Oh, J., & Litster, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.083 · Cited by 102
Wahdame, B., Candusso, D., François, X., Harel, F., Péra, M., Hissel, D., & Kauffmann, J. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.03.013 · Cited by 101
Hu, M., Zhu, X.-J., Wang, M., Gu, A., & Yu, L. (2003) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.023 · Cited by 101
Proton Exchange Membrane Fuel Cells: Progress in Cost Reduction of the Key Components
Ralph, T. R. (1997) · Platinum Metals Review · doi:10.1595/003214097x413102113 · Cited by 96
Hygro-thermal mechanical behavior of Nafion during constrained swelling
Silberstein, M. N., & Boyce, M. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.116 · Cited by 95
Gas permeability of catalyzed electrodes in polymer electrolyte membrane fuel cells
Zhao, J. F., Shahgaldi, S., Alaefour, I. E., Xu, Q., & Li, X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.087 · Cited by 94
Self-citationHitchcock, A. P., Berejnov, V., Lee, V., West, M. M., Colbow, V., Dutta, M., & Wessel, S. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.119 · Cited by 93
Ozden, A., Shahgaldi, S., Zhao, J. F., Li, X., & Hamdullahpur, F. (2017) · Fuel · doi:10.1016/j.fuel.2017.11.109 · Cited by 92
Self-citationLai, Y.-H., Rahmoeller, K. M., Hurst, J. H., Kukreja, R. S., Atwan, M. H., Maslyn, A. J., & Gittleman, C. S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0241806jes · Cited by 92
Recent progress in non‐precious metal catalysts for PEM fuel cell applications
Higgins, D. C., & Chen, Z. (2013) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.21884 · Cited by 89
Zhao, J. F., Shahgaldi, S., Li, X., & Liu, Z. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0391806jes · Cited by 89
Self-citationChang, Y., Liu, J., Li, R., Zhao, J. F., Qin, Y., Zhang, J., Yin, Y. S., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.03.066 · Cited by 88
Self-citationCharacterization of PEM fuel cell degradation by polarization change curves
Bezmalinović, D., Šimić, B., & Barbir, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.047 · Cited by 87
Banan, R., Bazylak, A., & Zu, J. W.-Z. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.11.125 · Cited by 87
Ozden, A., Shahgaldi, S., Zhao, J. F., Li, X., & Hamdullahpur, F. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.10.209 · Cited by 86
Self-citationMitigation of Carbon Corrosion in Microporous Layers in PEM Fuel Cells
Owejan, J. E., Yu, P. T., & Makharia, R. R. (2007) · ECS Transactions · doi:10.1149/1.2781018 · Cited by 85
Vibration tests on a PEM fuel cell stack usable in transportation application
Rajalakshmi, N., Pandian, S., & Dhathathreyan, K. S. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.03.002 · Cited by 81
Influence of the bolt torque on PEFC performance with different gasket materials
Gatto, I., Urbani, F., Giacoppo, G., Barbera, O., & Passalacqua, E. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.07.066 · Cited by 79
Zhou, J., Putz, A. M. V., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0381706jes · Cited by 79
Bae, S. J., Kim, S., Park, J. I., Park, C. W., Lee, J., Song, I., Lee, N., Kim, K., & Park, J. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.03.104 · Cited by 77
Zhao, J. F., Ozden, A., Shahgaldi, S., Alaefour, I. E., Li, X., & Hamdullahpur, F. (2018) · Energy · doi:10.1016/j.energy.2018.02.134 · Cited by 77
Self-citationDevelopment and performance of a 10kW PEMFC stack
Scholta, J., Berg, N., Wilde, P., Jörissen, L., & Garche, J. (2003) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.040 · Cited by 76
Lu, L., Ouyang, M., Huang, H., Pei, P., & Yang, F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.061 · Cited by 75
Neergat, M., & Ramesh, R. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.039207jes · Cited by 72
Effect of mechanical vibrations on damage propagation in polymer electrolyte membrane fuel cells
Banan, R., Bazylak, A., & Zu, J. W.-Z. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.08.136 · Cited by 72
Bloom, I., Walker, L. K., Basco, J. K., Malkow, T., Saturnio, A., Marco, G. D., & Tsotridis, G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.026 · Cited by 69
Zamani, P., Higgins, D. C., Hassan, F. M. B., Fu, X., Choi, J., Hoque, M. A., Jiang, G., & Chen, Z. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.035 · Cited by 68
Development of contact pressure distribution of PEM fuel cell's MEA using novel clamping mechanism
Alizadeh, E., Ghadimi, M., Barzegari, M. M., et al. (2017) · Energy · doi:10.1016/j.energy.2017.05.036 · Cited by 68
Selective hydration of the ‘short-side-chain’ perfluorosulfonic acid membrane. An ONIOM study
Paddison, S. J., & Elliott, J. A. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.01.007 · Cited by 66
Performance and endurance of a PEMFC operated with synthetic reformate fuel feed
Sishtla, C., Koncar, G., Platon, R., Gamburzev, S., Appleby, A. J., & Velev, O. A. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02719-5 · Cited by 63
Shahgaldi, S., Zhao, J. F., Alaefour, I. E., & Li, X. (2017) · Fuel · doi:10.1016/j.fuel.2017.07.035 · Cited by 62
Self-citationXu, L., Reimer, U., Li, J., Huang, H., Hu, Z., Jiang, H., Janßen, H., Ouyang, M., & Lehnert, W. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.075 · Cited by 61
Humidity and Temperature Cycling Effects on Cracks and Delaminations in PEMFCs
Banan, R., Zu, J. W.-Z., & Bazylak, A. (2015) · Fuel Cells · doi:10.1002/fuce.201400118 · Cited by 59
Chang, Y., Zhao, J. F., Shahgaldi, S., Qin, Y., Yin, Y. S., & Li, X. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.10.157 · Cited by 58
Self-citationYang, Z., Du, Q., Huo, S., & Jiao, K. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.08.106 · Cited by 56
Zhao, J., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.02.042 · Cited by 56
Self-citationMicrostructure changes in the catalyst layers of PEM fuel cells induced by load cycling
Rong, F., Huang, C. L., Liu, Z., Song, D., & Wang, Q. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.10.007 · Cited by 55
Zhao, J. F., Shahgaldi, S., Alaefour, I. E., Song, Y., & Li, X. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.01.019 · Cited by 55
Self-citationDiloyan, G., Sobel, M., Das, K., & Hutapea, P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.027 · Cited by 53
Shahgaldi, S., Alaefour, I., Zhao, J., & Li, X. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.076 · Cited by 52
Self-citationModeling of Transient Platinum Degradation in a Low Pt-Loading PEFC under Current Cycling
Li, Y., & Wang, C. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0081704jes · Cited by 49
Fu, X., Hassan, F. M. B., Zamani, P., Jiang, G., Higgins, D. C., Choi, J., Wang, X., Xu, P., Liu, Y., & Chen, Z. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.051 · Cited by 48
Jeon, Y., Juon, S., Hwang, H., Park, J.-H., & Shul, Y. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.10.025 · Cited by 44
Durability of sulfonated polyimide membrane in humidity cycling for fuel cell applications
Miyatake, K., Furuya, H., Tanaka, M., & Watanabe, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.039 · Cited by 43
Investigation of heating and cooling in a stand-alone high temperature PEM fuel cell system
Zhang, C., Yu, T., Yi, J., Liu, Z., Raj, K. A. R., Xia, L., Tu, Z., & Chan, S. H. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.008 · Cited by 43
Favorable effect of in-situ generated platinum in the membrane on fuel cell membrane durability
Macauley, N., Wong, K. H., Watson, M. K., & Kjeang, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.096 · Cited by 42
Venkatesan, S. V., Dutta, M., & Kjeang, E. (2016) · Electrochemistry Communications · doi:10.1016/j.elecom.2016.08.018 · Cited by 42
PEM fuel cell model suitable for energy optimization purposes
Caux, S., Hankache, W., Fadel, M., & Hissel, D. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.09.028 · Cited by 41
Performance optimisation of PEM fuel cell during MEA fabrication
Daud, W. R. W., Mohamad, A. B., Kadhum, A. A. H., Chebbi, R., & Iyuke, S. E. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.01.011 · Cited by 38
Development of a PEFC under low humidified conditions
Yoshioka, S., Yoshimura, A., Fukumoto, H., Hiroi, O., & Yoshiyasu, H. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.12.045 · Cited by 37
Yin, Y. S., Liu, J., Chang, Y., Zhu, Y., Xie, X. L., Qin, Y., Zhang, J., Jiao, K., Du, Q., & Guiver, M. D. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.11.048 · Cited by 36
Durable electrocatalytic-activity of Pt–Au/C cathode in PEMFCs
Selvaganesh, S. V., Selvarani, G., Sridhar, P., Pitchumani, S., & Shukla, A. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp20243j · Cited by 35
Zhou, J., Stanier, D., Putz, A. M. V., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0391706jes · Cited by 34
Degradation Resistant Cathodes in Polymer Electrolyte Membrane Fuel Cells
Ye, S., Hall, M., Cao, H., & He, P. (2006) · ECS Transactions · doi:10.1149/1.2356186 · Cited by 33
Sow, P. K., Prass, S., Kalisvaart, P., & Mérida, W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.110 · Cited by 33
Xu, Q., Zhang, W., Zhao, J. F., Xing, L., Ma, Q., Xu, L., & Su, H. (2018) · International Journal of Green Energy · doi:10.1080/15435075.2018.1431547 · Cited by 32
Self-citationAlvar, E. N., Zhou, B., & Eichhorn, S. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08801a · Cited by 26
Modeling and analysis of internal water transfer behavior of PEM fuel cell of large surface area
Hong, P., Xu, L., Li, J., & Ouyang, M. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.04.164 · Cited by 25
Xu, H., Wu, M., Liu, Y., Mittal, V. O., Kassim, F., Vieth, B., Bonville, L., Kunz, H. R., & Fenton, J. M. (2006) · ECS Transactions · doi:10.1149/1.2356177 · Cited by 23
Alvar, E. N., Zhou, B., & Eichhorn, S. H. (2017) · International Journal of Energy Research · doi:10.1002/er.3746 · Cited by 23
Parametric study of the porous cathode in the PEM fuel cell
Zhang, Z., & Jia, L. (2008) · International Journal of Energy Research · doi:10.1002/er.1471 · Cited by 20
The Effect of Platinum Electrocatalyst on Membrane Degradation in Polymer Electrolyte Fuel Cells
Bodner, M., Cermenek, B., Rami, M., & Hacker, V. (2015) · Membranes · doi:10.3390/membranes5040888 · Cited by 19
Mechanical Degradation of Membrane Electrode Assemblies in Proton Exchange Membrane Fuel Cells
Shen, Y. (2017) · UWSpace (University of Waterloo) · Cited by 16
Zhao, J. F., Shahgaldi, S., Ozden, A., Alaefour, I. E., Li, X., & Hamdullahpur, F. (2018) · International Journal of Energy Research · doi:10.1002/er.4260 · Cited by 14
Self-citationZhao, J. F. (2019) · UWSpace (University of Waterloo) · Cited by 14
Self-citationFuel Cell Testing Protocols: An International Perspective
Bloom, I., Basco, J. K., Walker, L., Thomas, M., Giancarlo, D. M., Saturnio, A., & Tsotridis, G. (2013) · Joint Research Centre (European Commission) · doi:10.2790/86676 · Cited by 12
(2004) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(04)80621-0 · Cited by 5
Cited by
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Pan, M., Pan, C., Li, C., & Zhao, J. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110771 · Cited by 357
Self-citationChen, Q., Zhang, G., Zhang, X., Sun, C., Jiao, K., & Wang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116496 · Cited by 298
A review on lifetime prediction of proton exchange membrane fuel cells system
Hua, Z., Zheng, Z., Pahon, E., Péra, M.-C., & Gao, F. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231256 · Cited by 289
Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Metadata
- Authors
- Zhao, J., & Li, X.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 199
- Pages
- 112022
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2973128894
- Cited by
- 430
- References
- 152
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.