The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
A novel battery thermal management system coupling with PCM and optimized controllable liquid cooling for different ambient temperatures
Abstract
In order to improve the working performance of the lithium-ion battery pack in continuous operation under different ambient temperatures, a coupled composite phase change material and liquid cooling thermal management system is proposed. The simulation for this system under a cycle that a 3C rate discharging and then a 0.5C charging was conducted, as well as comparison tests concerning factors such as cell-to-cell spacing, cell-to-tube distance, channel number and coolant velocity. Simulation results showed that the coupled system with suitable design exhibited good thermal performance at an ambient temperature of 30 °C, which kept the maximum surface temperature and the temperature difference of the battery pack at 41.1 °C and 4 °C at the end of 3C discharge. Then, the latent heat of phase change material was also recovered by the liquid cooling during the 0.5C charge. Specially designed experiments have also been conducted to verify the effectiveness and practicability of the proposed coupled system. Based on this system, a liquid cooling strategy was proposed for controlling the velocity and inlet temperature of coolant by monitoring the temperature of the phase change material and environment. This further improved the thermal performance of the battery pack during cycling at different ambient temperatures and significantly reduced the unnecessary power consumption of liquid cooling during this process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling
Qian, Z., Li, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.063 · Cited by 626
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Tan, F. L., Hosseinizadeh, S. F., Khodadadi, J. M., & Fan, L. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.02.043 · Cited by 457
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Ping, P., Peng, R., Kong, D., Chen, G., & Wen, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.025 · Cited by 366
Self-citationArora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Zhao, C., Cao, W., Dong, T., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.083 · Cited by 311
Mahmoud, S. M., Tang, A., Toh, C. K., Al-Dadah, R., & Soo, S. L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.059 · Cited by 299
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Design a J-type air-based battery thermal management system through surrogate-based optimization
Liu, Y., & Zhang, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113426 · Cited by 277
Huang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Azizi, Y., & Sadrameli, S. M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.081 · Cited by 246
Qu, Z. G., Li, W. Q., & Tao, W. Q. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.136 · Cited by 230
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Dong, T., Peng, P., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.024 · Cited by 221
Kshetrimayum, K. S., Yoon, Y.-G., Gye, H.-R., & Lee, C.-J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113797 · Cited by 216
Energy Density of Cylindrical Li-Ion Cells: A Comparison of Commercial 18650 to the 21700 Cells
Quinn, J. B., Waldmann, T., Richter, K., Kasper, M., & Wohlfahrt-Mehrens, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0281814jes · Cited by 212
Lv, Y., Situ, W., Yang, X., Zhang, G., & Wang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.061 · Cited by 207
Huang, Y.-H., Cheng, W.-L., & Zhao, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.064 · Cited by 207
Ling, Z., Cao, J., Zhang, W., Zhang, Z., Fang, X., & Gao, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.143 · Cited by 205
Zou, D., Liu, X., He, R., Zhu, S., Bao, J., Guo, J., Hu, Z., & Wang, B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.064 · Cited by 204
Wang, Z., Zhang, H., & Xia, X. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.057 · Cited by 203
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Wu, W., Zhang, G., Ke, X., Yang, X., Wang, Z., & Liu, C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.05.050 · Cited by 199
Jiang, G., Huang, J., Liu, M., & Cao, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.107 · Cited by 194
Hosseinzadeh, E., Genieser, R., Worwood, D., Barai, A., Marco, J., & Jennings, P. A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.027 · Cited by 183
Yan, J., Li, K., Chen, H., Wang, Q., & Sun, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.058 · Cited by 157
Tiari, S., Qiu, S., & Mahdavi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.025 · Cited by 150
Wei, A., Qu, J., Qiu, H., Wang, C., & Cao, G. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.021 · Cited by 148
Xie, Y., Tang, J., Shang, S., Xing, Y., Wu, H., Hu, Z., & Wen, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.046 · Cited by 141
Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles
Saw, L. H., Ye, Y., & Tay, A. A. O. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.016 · Cited by 128
Shang, S., Xie, Y., Li, M., Yuan, Y., Yu, J., Wu, H., Liu, B., & Liu, N. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.069 · Cited by 102
Shahid, S., & Agelin‐Chaab, M. (2017) · Energies · doi:10.3390/en10081157 · Cited by 96
Zheng, Y., Shi, Y., & Huang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.090 · Cited by 74
Chen, K., & Li, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.060 · Cited by 66
Thermal design analysis and performance test of a 1kW thermoelectric battery cooler
Kim, S. C., Lee, K., Park, S. H., & Kim, J. H. (2014) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2014.6892446 · Cited by 10
Cited by
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Akbarzadeh, M., Jaguemont, J., Kalogiannis, T., Karimi, D., He, J., Jin, L., Xie, P., Van Mierlo, J., & Berecibar, M. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.113862 · Cited by 336
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Metadata
- Authors
- Kong, D., Peng, R., Ping, P., Du, J., Chen, G., & Wen, J.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 204
- Pages
- 112280
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2989716694
- Cited by
- 423
- References
- 48
- FWCI
- 15.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.