The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
AI-based optimization of PEM fuel cell catalyst layers for maximum power density via data-driven surrogate modeling
Open accessAbstract
© 2020 Elsevier Ltd Catalyst layer (CL) is the core electrochemical reaction region of proton exchange membrane fuel cells (PEMFCs). Its composition directly determines PEMFC output performance. Existing experimental or modeling methods are still insufficient on the deep optimization of CL composition. This work develops a novel artificial intelligence (AI) framework combining a data-driven surrogate model and a stochastic optimization algorithm to achieve multi-variables global optimization for improving the maximum power density of PEMFCs. Simulation results of a three-dimensional computational fluid dynamics (CFD) PEMFC model coupled with the CL agglomerate model constitutes the database, which is then used to train the data-driven surrogate model based on Support Vector Machine (SVM), a typical AI algorithm. Prediction performance shows that the squared correlation coefficient (R-square) and mean percentage error in the test set are 0.9908 and 3.3375%, respectively. The surrogate model has demonstrated comparable accuracy to the physical model, but with much greater computation-resource efficiency: the calculation of one polarization curve will be within one second by the surrogate model, while it may cost hundreds of processor-hours by the physical CFD model. The surrogate model is then fed into a Genetic Algorithm (GA) to obtain the optimal solution of CL composition. For verification, the optimal CL composition is returned to the physical model, and the percentage error between the surrogate model predicted and physical model simulated maximum power densities under the optimal CL composition is only 1.3950%. The results indicate that the proposed framework can guide the multi-variables optimization of complex systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tao, F., & Qi, Q. (2019) · Nature · doi:10.1038/d41586-019-02849-1 · Cited by 799
Solar PV output prediction from video streams using convolutional neural networks
Sun, Y., Szűcs, G., & Brandt, A. R. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03420b · Cited by 169
Shahgaldi, S., Ozden, A., Li, X., & Hamdullahpur, F. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.078 · Cited by 121
Research works printed but not linked: 27
- Steinbach, 2018, Anode-design strategies for improved performance of polymer-electrolyte fuel cells with ultra-thin electrodes, Joule, 2, 1297, 10.1016/j.joule.2018.03.022 · DOI
- Guo, 2019, Optimization of critical parameters of PEM fuel cell using TLBO-DE based on Elman neural network, Energy Convers Manage, 183, 149, 10.1016/j.enconman.2018.12.088 · DOI
- Rao, 2019, Shark Smell Optimizer applied to identify the optimal parameters of the proton exchange membrane fuel cell model, Energy Convers Manage, 182, 1, 10.1016/j.enconman.2018.12.057 · doi:10.1016/j.enconman.2018.12.057
- Yoshida, 2015, Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society, Electrochem Soc Interface, 24, 45, 10.1149/2.F03152if · DOI · Paper page
- Yi, 2019, A lifetime prediction model for coated metallic bipolar plates in proton exchange membrane fuel cells, Energy Convers Manage, 183, 65, 10.1016/j.enconman.2018.12.092 · DOI
- Qin, 2017, Study on the operating pressure effect on the performance of a proton exchange membrane fuel cell power system, Energy Convers Manage, 142, 357, 10.1016/j.enconman.2017.03.035 · DOI
- Zhao, 2019, A review of polymer electrolyte membrane fuel cell durability for vehicular applications: degradation modes and experimental techniques, Energy Convers Manage, 199, 10.1016/j.enconman.2019.112022 · DOI · Paper page
- Chen, 2019, The reactant starvation of the proton exchange membrane fuel cells for vehicular applications: a review, Energy Convers Manage, 182, 282, 10.1016/j.enconman.2018.12.049 · DOI · Paper page
- Wang, 2019, A dot matrix and sloping baffle cathode flow field of proton exchange membrane fuel cell, J Power Sour, 434, 10.1016/j.jpowsour.2019.226741 · doi:10.1016/j.jpowsour.2019.226741
- Jiao, 2011, Water transport in polymer electrolyte membrane fuel cells, Prog Energy Combust Sci, 37, 221, 10.1016/j.pecs.2010.06.002 · DOI · Paper page
- Chang, 2019, Effect of humidity and thermal cycling on the catalyst layer structural changes in polymer electrolyte membrane fuel cells, Energy Convers Manage, 189, 24, 10.1016/j.enconman.2019.03.066 · DOI
- Zhao, 2018, Pore structure and effective diffusion coefficient of catalyzed electrodes in polymer electrolyte membrane fuel cells, Int J Hydrogen Energy, 43, 3776, 10.1016/j.ijhydene.2018.01.019 · DOI
- Shahgaldi, 2017, Investigation of catalytic vs reactant transport effect of catalyst layers on proton exchange membrane fuel cell performance, Fuel, 208, 321, 10.1016/j.fuel.2017.07.035 · DOI
- Chen, 2019, Pore-scale study of reactive transport processes in catalyst layer agglomerates of proton exchange membrane fuel cells, Electrochim Acta, 306, 454, 10.1016/j.electacta.2019.03.158 · doi:10.1016/j.electacta.2019.03.158
- Deng, 2019, Lattice Boltzmann simulation of oxygen diffusion and electrochemical reaction inside catalyst layer of PEM fuel cells, Int J Heat Mass Transf, 143, 10.1016/j.ijheatmasstransfer.2019.118538 · DOI
- Hou, 2019, Pore-scale investigation of catalyst layer ingredient and structure effect in proton exchange membrane fuel cell, Appl Energy, 253, 10.1016/j.apenergy.2019.113561 · DOI
- Zhang, 2018, Multi-phase models for water and thermal management of proton exchange membrane fuel cell: a review, J Power Sour, 391, 120, 10.1016/j.jpowsour.2018.04.071 · DOI · Paper page
- Xing, 2017, Inhomogeneous distribution of platinum and ionomer in the porous cathode to maximize the performance of a PEM fuel cell, AIChE J, 63, 4895, 10.1002/aic.15826 · DOI
- Xing, 2018, Homogenization of current density of PEM fuel cells by in-plane graded distributions of platinum loading and GDL porosity, Chem Eng Sci, 192, 699, 10.1016/j.ces.2018.08.029 · DOI
- Xing, 2014, A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell, Energy, 73, 618, 10.1016/j.energy.2014.06.065 · DOI · Paper page
- Xing, 2014, Numerical investigation of the optimal Nafion® ionomer content in cathode catalyst layer: an agglomerate two-phase flow modelling, Int J Hydrogen Energy, 39, 9087, 10.1016/j.ijhydene.2014.03.225 · DOI
- Xing, 2015, Numerical analysis of the optimum membrane/ionomer water content of PEMFCs: the interaction of Nafion® ionomer content and cathode relative humidity, Appl Energy, 138, 242, 10.1016/j.apenergy.2014.10.011 · DOI
- Severson, 2019, Data-driven prediction of battery cycle life before capacity degradation, Nat Energy, 4, 383, 10.1038/s41560-019-0356-8 · DOI · Paper page
- Xie, 2019, Three-dimensional multi-phase model of PEM fuel cell coupled with improved agglomerate sub-model of catalyst layer, Energy Convers Manage, 199, 10.1016/j.enconman.2019.112051 · doi:10.1016/j.enconman.2019.112051
- Owejan, 2013, Impact of platinum loading and catalyst layer structure on PEMFC performance, J Electrochem Soc, 160, F824, 10.1149/2.072308jes · DOI · Paper page
- Chang, 2011, LIBSVM: A library for support vector machines, ACM Trans Intell Syst Technol (TIST), 2, 27
- Houck, 1995, A genetic algorithm for function optimization: a Matlab implementation, Ncsu-ie tr, 95, 1
Cited by
Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology
Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100014 · Cited by 484
Self-citationTowards ultralow platinum loading proton exchange membrane fuel cells
Fan, L., Deng, H., Zhang, Y., Du, Q., Leung, D. Y. C., Wang, Y., & Jiao, K. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03169h · Cited by 253
Self-citationA survey of Digital Twin techniques in smart manufacturing and management of energy applications
Wang, Y., Kang, X., & Chen, Z. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100014 · Cited by 147
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Metadata
- Authors
- Wang, B., Xie, B., Xuan, J., & Jiao, K.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 205
- Pages
- 112460
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2999561881
- Cited by
- 215
- References
- 3
- FWCI
- 9.62
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Royal Society
- Natural Science Foundation of Tianjin City
- National Natural Science Foundation of China
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: AI-based optimization of PEM fuel cell catalyst layers for maximum power density via data-driven surrogate modeling. https://app.cochat.ai/papers/10.1016/j.enconman.2019.112460
- The paper
- Wang, B., Xie, B., Xuan, J., & Jiao, K. (2020). AI-based optimization of PEM fuel cell catalyst layers for maximum power density via data-driven surrogate modeling. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2019.112460
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.