The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment
Open accessAbstract
Pyrolysis is widely seen as a promising technology for converting plastic waste into a wax/oil product which can be used as a heavy fuel oil substitute or as raw material by the petrochemical industry. A pyrolysis plant with a capacity of 100 kg/h plastic waste is modelled in the process simulation software Aspen HYSYS. The production costs of the pyrolysis fuel product is estimated at £0.87/kg which is 58% higher than current market prices; therefore, a scaling-up analysis is also carried out to determine the plant capacity for which the pyrolysis process is economically feasible. The fuel production costs of the scaled-up cases considered are approximately 2.2–20.8 times lower than the existing market prices of residual fuel oil, indicating their economic feasibility. For the 1000 kg/h and 10,000 kg/h plant capacity cases the facility needs to operate approximately four years and one year respectively, to recover the capital investment, while the 100,000 kg/h case produces revenue and has a positive NPV within year one. A sensitivity analysis is also carried out revealing that the fuel production rate is the most sensitive parameter for the 100 kg/h plant, as well as the scaled-up plants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
A unified correlation for estimating HHV of solid, liquid and gaseous fuels
Channiwala, S. A., & Parikh, P. P. (2002) · Fuel · doi:10.1016/s0016-2361(01)00131-4 · Cited by 2,489
Perry's chemical engineers' handbook
(2000) · Choice Reviews Online · doi:10.5860/choice.38-0966 · Cited by 1,147
McKay, G. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(01)00228-5 · Cited by 832
Recycling of Polymers: A Review
Ignatyev, I. A., Thielemans, W., & Vander Beke, B. (2014) · ChemSusChem · doi:10.1002/cssc.201300898 · Cited by 753
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
Pyrolysis characteristics and kinetics of municipal solid wastes
Sørum, L., Grønli, M. G., & Hustad, J. E. (2001) · Fuel · doi:10.1016/s0016-2361(00)00218-0 · Cited by 527
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Thermal degradation of polystyrene
Faravelli, T., Pinciroli, M., Pisano, F., Bozzano, G., Dente, M., & Ranzi, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00159-5 · Cited by 370
Feedstock recycling of polymers by pyrolysis in a fluidised bed
Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 354
Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346
Carbon dioxide utilisation for production of transport fuels: process and economic analysis
Dimitriou, I., García-Gutiérrez, P., Elder, R. H., Cuéllar-Franca, R. M., Azapagic, A., & Allen, R. W. K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04117h · Cited by 301
Self-citationChattopadhyay, J., Pathak, T. S., Srivastava, R., & Singh, A. C. (2016) · Energy · doi:10.1016/j.energy.2016.03.015 · Cited by 291
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Pyrolysis of plastic wastes. 1. Effect of plastic waste composition on product yield
Pinto, F., Costa, P., Gulyurtlu, I., & Cabrita, I. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00007-8 · Cited by 253
Liu, Y., Qian, J., & Wang, J. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(99)00066-1 · Cited by 246
Miandad, R., Nizami, A. S., Rehan, M., Barakat, M. A., Khan, M. I., Mustafa, A., Ismail, I. M. I., & Murphy, J. D. (2016) · Waste Management · doi:10.1016/j.wasman.2016.09.023 · Cited by 219
Fast co-pyrolysis of low density polyethylene and biomass residue for oil production
Yang, J., Rizkiana, J., Widayatno, W. B., Karnjanakom, S., Kaewpanha, M., Hao, X., Abudula, A., & Guan, G. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.05.008 · Cited by 182
Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene
Kiran Ciliz, N., Ekinci, E., & Snape, C. E. (2004) · Waste Management · doi:10.1016/j.wasman.2003.06.002 · Cited by 173
Mixed-waste pyrolysis of biomass and plastics waste – A modelling approach to reduce energy usage
Oyedun, A. O., Gebreegziabher, T. G., Ng, D. K. S., & Hui, C. W. (2014) · Energy · doi:10.1016/j.energy.2014.05.063 · Cited by 109
Pyrolysis and gasification of typical components in wastes with macro-TGA
Meng, A., Chen, S., Long, Y., Zhou, H., Zhang, Y., & Li, Q. (2015) · Waste Management · doi:10.1016/j.wasman.2015.08.025 · Cited by 96
Pyrolysis of Waste Plastics into Fuels
Gao, F. (2010) · UC Research Repository (University of Canterbury) · doi:10.26021/3251 · Cited by 64
Li, Q., Meng, A., Jia, J., & Zhang, Y. (2010) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(09)60174-1 · Cited by 62
Sahu, J. N., Mahalik, K., Nam, H. K., Ling, T. Y., Woon, T. S., Rahman, M. S. B. A., Mohanty, Y. K., Jayakumar, N. S., & Jamuar, S. S. (2013) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11748 · Cited by 52
Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China
Xingzhong, Y. (2006) · doi:10.1002/0470021543.ch28 · Cited by 24
Cited by
Pyrolysis of plastic waste: Opportunities and challenges
Qureshi, M. S., Oasmaa, A., Pihkola, H., Deviatkin, I., Tenhunen, A., Mannila, J., Minkkinen, H., Pohjakallio, M., & Laine-Ylijoki, J. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104804 · Cited by 778
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Metadata
- Authors
- Fivga, A., & Dimitriou, I.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2018-04
- Volume
- 149
- Pages
- 865-874
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2798057589
- Cited by
- 305
- References
- 30
- FWCI
- 7.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.