The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Carbon@titanium nitride dual shell nanospheres as multi-functional hosts for lithium sulfur batteries
Abstract
Abstract Lithium-sulfur (Li-S) cells have received particular attention as a “post lithium ion” energy storage system. However, low sulfur utilization and poor redox kinetics are still key challenges to improving cycling efficiency. Herein, we develop a multi-functional polysulfide mediator based on carbon hollow nanospheres supported titanium nitride (C@TiN) dual-shell hollow nanospheres, in which the physical confinement, chemical adsorption, and catalysis for sulfur species conversion were successfully achieved simultaneously. As a result, C@TiN-S composites (approximately 70 wt% sulfur content) exhibit faster reaction kinetics and a higher polysulfide trap capability than that of C@TiO2-S composites when used as cathode materials in Li-S batteries. The C@TiN-S electrode delivers a reversible capacity of 453 mA h g−1, coupled with a high average Coulombic Efficiency (~ 99.0%). There is also limited capacitance decay (only 0.0033% per cycle), at a current density of 3 C, over 300 cycles. In particular, when the sulfur loading is increased to 4.2 mg cm−2, the C@TiN-S electrode can provide a high capacity of 820 mA h g−1 over 150 cycles at 0.2 C. DFT calculations reveal that the long-chain Li2S8 tend to break down into two shorter chain segments due to the strong interaction of TiN and LiPSs. Electrochemical analysis techniques indicate that TiN can effectively catalyze the reduction of polysulfide and the oxidation of Li2S during discharge and charge processes, respectively. Our work offers a new strategy to develop high-performance Li-S batteries based on multi-functional mediators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Cited by
Transition metal nitrides for electrochemical energy applications
Wang, H., Li, J., Li, K., Lin, Y., Chen, J., Gao, L., Nicolosi, V., Xiao, X., & Lee, J.-M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00415d · Cited by 983
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Potassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Self-citationZhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering
Wang, Y., Zhang, R., Chen, J., Wu, H., Lu, S., Wang, K., Li, H., Harris, C. J., Xi, K., Kumar, R. V., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900953 · Cited by 447
Self-citationRecent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Self-citationHan, Z., Zhao, S., Xiao, J., Zhong, X., Sheng, J., Lv, W., Zhang, Q., Zhou, G., & Cheng, H. (2021) · Advanced Materials · doi:10.1002/adma.202105947 · Cited by 432
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries
Wang, Y., Li, Z., Hou, Y., Hao, Z., Zhang, Q., Ni, Y., Lu, Y., Yan, Z., Zhang, K., Zhao, Q., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00873d · Cited by 390
Self-citationNguyen, D. C., Luyen Doan, T. L., Prabhakaran, S., Tran, D. T., Kim, D. H., Lee, J. H., & Kim, N. H. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105750 · Cited by 385
Nanoengineering Carbon Spheres as Nanoreactors for Sustainable Energy Applications
Tian, H., Liang, J., & Liu, J. (2019) · Advanced Materials · doi:10.1002/adma.201903886 · Cited by 348
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Wang, R., Yang, J., Chen, X., Zhao, Y., Zhao, W., Qian, G., Li, S., Xiao, Y., Chen, H., Ye, Y., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903550 · Cited by 315
Self-citationTwo‐dimensional MXenes for lithium‐sulfur batteries
Zhang, C. (., Cui, L., Abdolhosseinzadeh, S., & Heier, J. (2020) · InfoMat · doi:10.1002/inf2.12080 · Cited by 308
Lei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Zheng, B., Lin, X., Zhang, X., Wu, D., & Matyjaszewski, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907006 · Cited by 291
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Sun, Z., Wang, Y., Zhang, L., Wu, H., Jin, Y., Li, Y., Shi, Y., Zhu, T., Mao, H., Liu, J., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910482 · Cited by 276
Self-citationExploring and Understanding the Roles of Li2Sn and the Strategies to beyond Present Li-S Batteries
Lei, J., Liu, T., Chen, J., Zheng, M., Zhang, Q., Mao, B., & Dong, Q. (2020) · Chem · doi:10.1016/j.chempr.2020.06.032 · Cited by 268
Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries
Wang, M., Bai, Z., Yang, T., Nie, C., Xu, X., Wang, Y., Yang, J., Dou, S., & Wang, N. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201585 · Cited by 266
Self-citation
Metadata
- Authors
- Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 16
- Pages
- 228-235
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2810687923
- Cited by
- 312
- References
- 48
- FWCI
- 16.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.