The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Carnot battery technology: A state-of-the-art review
Open accessAbstract
The growth of renewable energy requires flexible, low-cost and efficient electrical storage to balance the mismatch between energy supply and demand. The Carnot battery buffers electrical energy by storing thermal energy (charging cycle mode) from a resistive heater or a heat pump system when the electricity production is higher than the demand. When electricity demand is higher than the production, the Carnot battery generates power from the stored thermal energy (power cycle mode). This paper is a review of this emerging and innovative technology, including a market analysis. First, the different possible technologies and configurations of Carnot batteries are described. This includes charging cycles, power cycles and thermal energy storage systems. Furthermore, a state-of-the-art of the existing prototypes in the world is given. The performance indicators for this technology are unclear, and this paper tries to define objective performance indicators. Finally, all the described technologies are compared, and conclusions are drawn to help engineers select the optimal technology for a given case.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thring, M. W. (1977) · Electronics and Power · doi:10.1049/ep.1977.0180 · Cited by 7,338
Luo, X., Wang, J., Dooner, M., & Clarke, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.081 · Cited by 3,869
The Exergy Method of Thermal Plant Analysis
(1985) · Elsevier eBooks · doi:10.1016/c2013-0-00894-8 · Cited by 2,895
A Comprehensive Review of Thermal Energy Storage
Sarbu, I., & Sebarchievici, C. (2018) · Sustainability · doi:10.3390/su10010191 · Cited by 1,311
Hasnain, S. M. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(98)00025-9 · Cited by 1,267
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
Energy storage in the energy transition context: A technology review
Gallo, A. B., Simões-Moreira, J. R., Costa, H. K. M., Santos, M. M., & Moutinho dos Santos, E. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.07.028 · Cited by 684
Argyrou, M. C., Christodoulides, P., & Kalogirou, S. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.044 · Cited by 552
Liquid air energy storage—Analysis and first results from a pilot scale demonstration plant
Morgan, R., Nelmes, S., Gibson, E., & Brett, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.109 · Cited by 399
Trends and challenges of grid-connected photovoltaic systems – A review
Obi, M., & Bass, R. B. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.289 · Cited by 385
Smallbone, A. J., Jülch, V., Wardle, R., & Roskilly, A. P. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.047 · Cited by 329
Pumped Thermal Electricity Storage: A technology overview
Benato, A., & Stoppato, A. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.01.017 · Cited by 300
A thermal energy storage process for large scale electric applications
Desrues, T., Ruer, J., Marty, P., & Fourmigué, J. F. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.10.002 · Cited by 285
Parametric studies and optimisation of pumped thermal electricity storage
McTigue, J. D., White, A. J., & Markides, C. N. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.08.039 · Cited by 272
Hou, Q., Zhang, N., Du, E., Miao, M., Peng, F., & Kang, C. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.067 · Cited by 267
Thermodynamic analysis of pumped thermal electricity storage
White, A., Parks, G., & Markides, C. N. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.03.030 · Cited by 243
Load shifting of nuclear power plants using cryogenic energy storage technology
Li, Y., Cao, H., Wang, S., Jin, Y., Li, D., Wang, X., & Ding, Y. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.077 · Cited by 242
Advances in Thermal Energy Storage Systems
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16453-7 · Cited by 239
A novel Pumped Thermal Electricity Storage (PTES) system with thermal integration
Frate, G. F., Antonelli, M., & Desideri, U. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.04.127 · Cited by 199
Self-citationOverview of Current Development in Compressed Air Energy Storage Technology
Luo, X., Wang, J., Dooner, M., Clarke, J., & Krupke, C. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.12.423 · Cited by 193
Fürsch, M., Hagspiel, S., Jägemann, C., Nagl, S., Lindenberger, D., & Tröster, E. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.050 · Cited by 190
Thermo-mechanical concepts for bulk energy storage
Steinmann, W.-D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.065 · Cited by 180
Damak, C., Leducq, D., Hoang, H. M., Negro, D., & Delahaye, A. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2019.11.009 · Cited by 175
A Second Law analysis of the optimum design and operation of thermal energy storage systems
Krane, R. J. (1987) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(87)90059-7 · Cited by 172
Frate, G. F., Ferrari, L., & Desideri, U. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112530 · Cited by 168
Self-citationPerformance and cost evaluation of an innovative Pumped Thermal Electricity Storage power system
Benato, A. (2017) · Energy · doi:10.1016/j.energy.2017.07.066 · Cited by 167
Corrosion of metal containers for use in PCM energy storage
Ferrer, G., Solé, A., Barreneche, C., et al. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.11.036 · Cited by 157
Mapping of performance of pumped thermal energy storage (Carnot battery) using waste heat recovery
Dumont, O., & Lemort, V. (2020) · Energy · doi:10.1016/j.energy.2020.118963 · Cited by 157
Self-citationLiquid air energy storage: potential and challenges of hybrid power plants
Antonelli, M., Barsali, S., Desideri, U., Giglioli, R., Paganucci, F., & Pasini, G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.091 · Cited by 155
Georgiou, S., Shah, N., & Markides, C. N. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.128 · Cited by 153
Polymeric phase change composites for thermal energy storage
Peng, S. J., Fuchs, A., & Wirtz, R. A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20578 · Cited by 142
Systems design and analysis of liquid air energy storage from liquefied natural gas cold energy
Lee, I., & You, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.087 · Cited by 141
Yang, X., Tan, S., He, Z., & Liu, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.056 · Cited by 135
Farres-Antunez, P., Xue, H., & White, A. J. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.04.016 · Cited by 113
Few, S., Schmidt, O., Offer, G. J., Brandon, N. P., Nelson, J., & Gambhir, A. (2018) · Energy Policy · doi:10.1016/j.enpol.2017.12.033 · Cited by 105
Tafone, A., Borri, E., Comodi, G., van den Broek, M., & Romagnoli, A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.133 · Cited by 104
Figure-of-merit for phase-change materials used in thermal management
Shao, L., Raghavan, A., Kim, G.-H., Emurian, L., Rosen, J., Papaefthymiou, M. C., Wenisch, T. F., Martin, M. M. K., & Pipe, K. P. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.05.040 · Cited by 101
Wang, L., Lin, X., Chai, L., Peng, L., Yu, D., Liu, J., & Chen, H. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.02.022 · Cited by 91
Proceedings of World Renewable Energy Congress '99
Sopian, K., Othman, M. Y., & Yatim, B. (2000) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 80
Guo, J., Cai, L., Chen, J., & Zhou, Y. (2016) · Energy · doi:10.1016/j.energy.2016.07.080 · Cited by 72
Benato, A., & Stoppato, A. (2018) · Energy · doi:10.1016/j.energy.2018.01.045 · Cited by 71
Thermoeconomic analysis of a solar enhanced energy storage concept based on thermodynamic cycles
Henchoz, S., Buchter, F., Favrat, D., Morandin, M., & Mercangöz, M. (2012) · Energy · doi:10.1016/j.energy.2012.02.010 · Cited by 60
Analysis of pumped heat electricity storage process using exponential matrix solutions
Ni, F., & Caram, H. S. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.046 · Cited by 59
Kotas, T. J. (1985) · Elsevier eBooks · doi:10.1016/b978-0-408-01350-5.50009-x · Cited by 41
Lecompte, S., Gusev, S., Vanslambrouck, B., & Paepe, M. D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.103 · Cited by 37
Self-citationFrate, G. F., Ferrari, L., & Desideri, U. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201913701037 · Cited by 19
Self-citation
Metadata
- Authors
- Dumont, O., Frate, G. F., Pillai, A., Lecompte, S., De paepe, M., & Lemort, V.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 32
- Pages
- 101756
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3088155817
- Cited by
- 448
- References
- 47
- FWCI
- 20.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.