Cited by 296Polymer crystallization and propertiesbiodegradable polymer synthesis and propertiesPolymer Nanocomposites and Properties

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)

Cocca, Mariacristina, Lorenzo, Maria Laura Di, Malinconico, Mario, Frezza, Vincenzo·2011·European Polymer Journal

DOI 10.1016/j.eurpolymj.2011.02.009

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1016/j.eurpolymj.2011.02.009

Cites

0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Polymorphous Crystallization and Multiple Melting Behavior of Poly( l -lactide): Molecular Weight Dependence
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Crystallization behavior of poly(l-lactic acid)
Di Lorenzo, M. L. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.020 · Cited by 295
Water vapor permeability of biodegradable polymers
Shogren, R. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763592 · Cited by 287
The mechanical properties of random copolymers of ethylene: Force‐elongation relations
Peacock, A. J., & Mandelkern, L. (1990) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1990.090281104 · Cited by 91

Flagged first, then by citations

Show all 0 references

Research works printed but not linked: 52

Bogaert, 2000, Poly(lactic acids): a potential solution to plastic waste dilemma, Macromol Symp, 153, 287, 10.1002/1521-3900(200003)153:1<287::AID-MASY287>3.0.CO;2-E · DOI · Paper page
Darder, 2007, Bionanocomposites: a new concept of ecological, bioinspired, and functional hybrid materials, Adv Mater, 19, 1309, 10.1002/adma.200602328 · DOI
Nair, 2007, Biodegradable polymers as biomaterials, Prog Polym Sci, 32, 762, 10.1016/j.progpolymsci.2007.05.017 · DOI · Paper page
De Santis, 1968, Molecular conformation of poly(S-lactic acid), Biopolymers, 6, 299, 10.1002/bip.1968.360060305 · DOI
Hoogsteen, 1990, Crystal structure, conformation and morphology of solution-spun poly(l-lactide) fibers, Macromolecules, 23, 634, 10.1021/ma00204a041 · DOI
Kobayshi, 1995, Structural and optical properties of poly lactic acids, J Appl Phys, 77, 2957, 10.1063/1.358712 · DOI
Cartier, 2000, Epitaxial crystallization and crystalline polymorphism of polylactides, Polymer, 41, 8909, 10.1016/S0032-3861(00)00234-2 · DOI
Eling, 1982, Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibers, Polymer, 23, 1587, 10.1016/0032-3861(82)90176-8 · DOI
Zhang, 2005, Crystal modifications and thermal behavior of poly(l-lactic acid) revealed by infrared spectroscopy, Macromolecules, 38, 8012, 10.1021/ma051232r · DOI · Paper page
Cho, 2006, Temperature dependent variations in the lamellar structure of poly(l-lactide), Polymer, 47, 1036, 10.1016/j.polymer.2005.12.027 · DOI
Di Lorenzo, 2001, Determination of spherulite growth rates of poly(l-lactic acid) using combined isothermal and non-isothermal procedures, Polymer, 42, 9441, 10.1016/S0032-3861(01)00499-2 · DOI
Abe, 2001, Morphological and kinetic analyses of regime transition for poly[(S)-lactide] crystal growth, Biomacromolecules, 2, 1007, 10.1021/bm015543v · DOI · Paper page
Kawai, 2007, Crystallization and melting behavior of poly (l-lactic acid), Macromolecules, 40, 9463, 10.1021/ma070082c · DOI · Paper page
Zhang, 2008, Disorder-to-order phase transition and multiple melting behavior of poly(l-lactide) investigated by simultaneous measurements of WAXD and DSC, Macromolecules, 41, 1352, 10.1021/ma0706071 · DOI · Paper page
Zhang, 2006, Confirmation of disorder α form of poly(l-lactic acid) by the X-ray fiber pattern and polarized IR/Raman spectra measured for uniaxially-oriented samples, Macromol Symp, 242, 274, 10.1002/masy.200651038 · DOI
Pan, 2008, Effect of crystallization temperature on crystal modifications and crystallization kinetics of poly(l-lactide), J Appl Polym Sci, 107, 54, 10.1002/app.27102 · DOI
Pan, 2008, Polymorphic transition in disordered poly(l-lactide) crystals induced by annealing at elevated temperatures, Macromolecules, 41, 4296, 10.1021/ma800343g · DOI
Sawai, 2006, Crystal transformation and development of tensile properties upon drawing of poly(l-lactic acid) by solid-state coextrusion: effects of molecular weight, Macromol Symp, 242, 93, 10.1002/masy.200651015 · DOI
Di Lorenzo ML, Cocca M, Malinconico M, Crystal polymorphism of poly(l-lactic acid) and its influence on thermal properties, Thermochimica Acta, 2011, in press. doi:10.1016/j.tca.2010.12.027. · DOI
Hermans, 1961, On the determination of the crystalline fraction of polyethylenes from X-ray diffraction, Makromol Chem, 44, 24, 10.1002/macp.1961.020440103 · DOI
Brizzolara, 1996, Mechanism of the stereocomplex formation between enantiomeric poly(lactide)s, Macromolecules, 29, 191, 10.1021/ma951144e · DOI · Paper page
Miyata, 1997, Morphology of poly(-lactide) solution-grown crystals, Polymer, 38, 4003, 10.1016/S0032-3861(96)00987-1 · DOI
Turner-Jones, 1964, Crystalline forms of isotactic polypropylene, Makromol Chem, 75, 134, 10.1002/macp.1964.020750113 · DOI
Lagaron, 2002, On the effect of the nature of the side chain over the crystalline structure in aliphatic polyketones, Polymer, 43, 1877, 10.1016/S0032-3861(01)00787-X · DOI
Obadal, 2005, Tailoring of three-phase crystalline systems in isotactic poly(propylene), Macromol Rapid Commun, 26, 1253, 10.1002/marc.200500272 · DOI
Di Lorenzo, 2006, The crystallization and melting processes of poly(l-lactic acid), Macromol Symp, 234, 176, 10.1002/masy.200650223 · DOI
Starkweather, 1956, Effect of crystallinity on the properties of nylons, J Polym Sci, 21, 189, 10.1002/pol.1956.120219803 · DOI
Wakabayashi, 2005, Micromechanical interpretation of the modulus of ethylene–(meth)acrylic acid copolymers, Polymer, 46, 8838, 10.1016/j.polymer.2004.12.063 · DOI
Galeski, 2003, Strength and toughness of crystalline polymer systems, Progr Polym Sci, 28, 1643, 10.1016/j.progpolymsci.2003.09.003 · DOI
Di Lorenzo, 2008, The three-phase structure of isotactic poly(1-butene), Polymer, 49, 1323, 10.1016/j.polymer.2008.01.026 · DOI
Wunderlich, 1984, Thermotropic mesophases and mesophase transitions of linear. flexible macromolecules, Adv Poly Sci, 60, 1
Ungar, 1993, Thermotropic hexagonal phases in polymers: common features and classification, Polymer, 34, 2050, 10.1016/0032-3861(93)90730-X · DOI
Klop, 1995, Polymorphism in alternating polyketones studied by x-ray diffraction and calorimetry, J Polym Sci: Part B: Polym Phys, 33, 315, 10.1002/polb.1995.090330217 · DOI
Auriemma F, De Rosa C, Corradini P. Solid mesophases in semicrystalline polymers: Structural analysis by diffraction techniques. In: Allegra G, editor. Interphases and Mesophases in Polymer Crystallization II. Advances in Polymer Science 2005; 181, p. 1–74. · DOI
Zia, 2009, Deformation behavior of isotactic polypropylene crystallized via a mesophase, Polym Bull, 63, 755, 10.1007/s00289-009-0151-y · DOI
Maring D, Wilhelm M, Spiess HW, Meurer B, Weill G. Dynamics in the crystalline polymorphic forms I and II and form III of isotactic poly-1-butene. J Polym Sci, Part B: Poly Phys 2000; 38(20): 2611-2624. · DOI
Androsch, 2010, Mesophases in polyethylene, polypropylene, and poly(1-butene), Polymer, 51, 4639, 10.1016/j.polymer.2010.07.033 · DOI
Yang, 1985, Deformation mechanisms of isotactic poly(1-butene), Macromol Chem, 186, 1961, 10.1002/macp.1985.021860923 · DOI
Di Lorenzo, 2009, Influence of crystal polymorphism on the three-phase structure and on the thermal properties of isotactic poly(1-butene), Macromolecules, 42, 9312, 10.1021/ma901882g · DOI
Grein, 2002, Influence of β nucleation on the mechanical properties of isotactic polypropylene and rubber modified isotactic polypropylene, Polymer, 43, 3279, 10.1016/S0032-3861(02)00135-0 · DOI
Drieskens M, Peeters R, Mullens J, Franco D, Lemstra PJ, Hristova-Bogaerds DG. Structure versus properties relationship of poly(lactic acid). I. Effect of crystallinity on barrier properties, J Polym Sci Part B: Polym Phys 2009;47 (22):2247–2258. · DOI
George, 2001, Transport phenomena through polymeric systems, Progr Polym Sci, 26, 985, 10.1016/S0079-6700(00)00036-8 · DOI
Yoon, 2000, Diffusion coefficient and equilibrium solubility of water molecules in biodegradable polymers, J Appl Polym Sci, 77, 1716, 10.1002/1097-4628(20000822)77:8<1716::AID-APP8>3.0.CO;2-F · DOI
Siparsky, 1997, Water transport in polylactic acid (PLA), PLA/ polycaprolactone copolymers, and PLA/polyethylene glycol blends, J Environ Polym Degrad, 5, 125, 10.1007/BF02763656 · DOI
Polyakova, 2001, Oxygen-barrier properties of polyethylene terephthalate modified with a small amount of aromatic comonomer, J Polym Sci: Part B: Polym Phys, 39, 1900, 10.1002/polb.1164 · DOI
Polyakova, 2001, Oxygen-barrier properties of copolymers based on ethylene terephthalate, J Polym Sci: Part B: Polym Phys, 39, 1889, 10.1002/polb.1163 · DOI
Auras, 2004, An overview of polylactides as packaging materials, Macromol Biosci, 4, 835, 10.1002/mabi.200400043 · DOI · Paper page
Tsuji, 2006, Water vapor permeability of poly(lactide)s: effects of molecular characteristics and crystallinity, J Appl Polym Sci, 99, 2245, 10.1002/app.22698 · DOI · Paper page
Bao, 2006, Gas permeation properties of poly(lactic acid) revisited, J Membr Sci, 285, 166, 10.1016/j.memsci.2006.08.021 · DOI
Colomines, 2008, Influences of the crystallisation rate on thermal, barrier properties of polylactide acid (PLA) food packaging films, Int J Mater Form, 1, 607, 10.1007/s12289-008-0329-0 · DOI
Vittoria, 1986, Solvent-induced crystallization of quenched isotactic polypropylene in different liquids, Macromolecules, 19, 1975, 10.1021/ma00161a033 · DOI
Platé, 1990, Polysilicon hydrocarbons: synthesis, structure and gas separating properties: review, Polym Sci USSR, 32, 1053, 10.1016/0032-3950(90)90157-2 · DOI

Sorted by citations

Items 101–200 of 265

Enhancement of tensile toughness of poly(lactic acid) (PLA) through blending of a polydecalactone-grafted cellulose copolymer: The effect of mesophase transition on mechanical properties.
Lee, W.-Y., Lee, J., Chung, J., & Kwak, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.205 · Cited by 33
Poly(lactide)-g-poly(butylene succinate-co-adipate) with High Crystallization Capacity and Migration Resistance
Yang, X., Xu, H., Odelius, K., & Hakkarainen, M. (2016) · Materials · doi:10.3390/ma9050313 · Cited by 33
“The crystal polymorphism [42], the degree of space filling [44] and the rigid amorphous fraction [41,44] are all important parameters which influencing the barrier property of PLA.”
Background
Humic substance/metal-oxide multifunctional nanoparticles as advanced antibacterial-antimycotic agents and photocatalysts for the degradation of PLA microplastics under UVA/solar radiation.
Russo, S., Muscetta, M., Amato, P., Venezia, V., Verrillo, M., Rega, R., Lettieri, S., Cocca, M., Marotta, R., & Vitiello, G. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140605 · Cited by 32
Self-citation
Effect of D‐lactide content of annealed poly(lactic acid) on its thermal, mechanical, heat deflection temperature, and creep properties
Tábi, T., Wacha, A., & Hajba, S. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47103 · Cited by 37
Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance
Moya‐López, C., González-Fuentes, J., Bravo, I., Chapron, D., Bourson, P., Alonso‐Moreno, C., & Hermida‐Merino, D. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14081673 · Cited by 43
Tailoring the thermal and mechanical properties of injection‐molded poly (lactic acid) parts through annealing
Li, G., Yang, B., Han, W., Li, H., Kang, Z., & Lin, J. X. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49648 · Cited by 30
Extruded composite films based on polylactic acid and sodium alginate
Mortalò, C., Russo, P., Miorin, E., Zin, V., Paradisi, E., & Leonelli, C. (2023) · Polymer · doi:10.1016/j.polymer.2023.126162 · Cited by 32
Crystallinity and Gas Permeability of Poly (Lactic Acid)/Starch Nanocrystal Nanocomposite
Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022) · Polymers · doi:10.3390/polym14142802 · Cited by 33
“The crystalline structures and their morphology within a crystalline phase of PLA can be modified by subjecting it to thermal treatment [10,11].”
Background
An investigation into the polylactic acid texturization through thermomechanical processing and the improved d33 piezoelectric outcome of the fabricated scaffolds
Farahani, A., Zarei-Hanzaki, A., Abedi, H. R., Haririan, I., Akrami, M., Aalipour, Z., & Tayebi, L. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.11.048 · Cited by 29
“In this respect, Table 1 provides comprehensive detail on PLA conformation, crystalline phase formation, and the condition [5,23,38].”
Background
Impact of nanoconfinement on polylactide crystallization and gas barrier properties.
Nassar, S. F., Delpouve, N., Sollogoub, C., Guinault, A., Stoclet, G., Régnier, G., & Domenek, S. (2020) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.9b21391 · Cited by 29
Thermal behaviors and characteristics of polylactide/poly(butylene succinate) blend films via reactive compatibilization and plasticization
Phetwarotai, W., Maneechot, H., Kalkornsurapranee, E., & Phusunti, N. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4321 · Cited by 31
Optimized PLA-based EMAP systems for horticultural produce designed to regulate the targeted in-package atmosphere
Briassoulis, D., Mistriotis, A., Giannoulis, A., & Giannopoulos, D. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.03.017 · Cited by 29
Isothermal and non‐isothermal crystallization of poly( L ‐lactic acid)/poly(butylene terephthalate) blends
Lorenzo, M. L. D., Rubino, P., & Cocca, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40372 · Cited by 29
Self-citation
Barrier properties of PLA to water vapour: Effect of temperature and morphology
Gorrasi, G., Anastasio, R., Bassi, L., & Pantani, R. (2013) · Macromolecular Research · doi:10.1007/s13233-013-1144-0 · Cited by 28
Interactions between PLA, organo‐montmorillonite and plasticizer: Synergistic effect on the barrier and mechanical properties of PLA nanocomposites blown films
Adrar, S., & Ajji, A. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54867 · Cited by 27
Crystallization of Potassium-Zeolites in Organic-Free MediaPreprint
Chawla, A., Mallette, A. J., Jain, R., Le, N., Hernandez, F. C. R., & Rimer, J. D. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4078668 · Cited by 32
Development of High Temperature Resistant Stereocomplex PLA for Injection Moulding
Körber, S., Moser, K., & Diemert, J. (2022) · Polymers · doi:10.3390/polym14030384 · Cited by 36
“the case for PLA, although a non-linear increase in the modulus of elasticity with crystallinity can be observed due to the influence of the α and α’ crystals [66].”
Background
Temperature-dependent polymorphic crystallization of poly(l-lactide)s on the basis of optical purity and microstructure
Song, P., Sang, L., Jin, C., & Wei, Z. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.069 · Cited by 31
Molecular transport through 3-hydroxybutyrate co-3-hydroxyhexanoate biopolymer films with dispersed graphene oxide nanoparticles: Gas barrier, structural and mechanical properties
Mahmood, H., Pegoretti, A., Brusa, R., Ceccato, R., Penasa, L., Tarter, S., & Checchetto, R. (2020) · doi:10.1016/j.polymertesting.2019.106181 · Cited by 27
Osteoinduction of 3D printed particulate and short-fibre reinforced composites produced using PLLA and apatite-wollastonite
Melo, P., Ferreira, A., Waldron, K., Swift, T., Gentile, P., Magallanes, M., Marshall, M., & Dalgarno, K. (2019) · Composites Science And Technology · doi:10.1016/j.compscitech.2019.107834 · Cited by 26
“2), which could be associated to the fast cool down of material[22,31].”
Background
Preparation of poly(glycolide-co-lactide)s through a green process: Analysis of structural, thermal, and barrier properties
Gorrasi, G., Meduri, A., Rizzarelli, P., Carroccio, S., Curcuruto, G., Pellecchia, C., & Pappalardo, D. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.10.002 · Cited by 26
Improving transparency of incompatible polymer blends by reactive compatibilization
Zhang, W.-Y., Gui, Z., Lu, C., Cheng, S.-J., Cai, D., & Gao, Y. (2013) · Materials Letters · doi:10.1016/j.matlet.2012.10.060 · Cited by 26
The Fuzzy Cognitive Map–Based Shelf-life Modelling for Food Storage
Sarkar, T., Salauddin, M., Pati, S., Chakraborty, R., Shariati, M., Rebezov, M., Ermolaev, V., Mirgorodskaya, M., Pateiro, M., & Lorenzo, J. (2021) · Food Analytical Methods · doi:10.1007/s12161-021-02147-5 · Cited by 25
Young's modulus of the different crystalline phases of poly (l-lactic acid)
Jariyavidyanont, K., Yu, Q., Petzold, A., Thurn‐Albrecht, T., Glüge, R., Altenbach, H., & Androsch, R. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105546 · Cited by 26
Poly(lactic acid)/flax composites: effect of surface modification and thermal treatment on interfacial adhesion, crystallization, microstructure, and mechanical properties
Bayart, M., Foruzanmehr, M., Vuillaume, P., Ovlaque, P., Robert, M., & Elkoun, S. (2021) · Composite interfaces (Print) · doi:10.1080/09276440.2021.1884470 · Cited by 24
“Hence, the former has a lower Young’s modulus than the latter [16].”
Background
Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(l-lactic acid)/glycerol triacetate blends
Salas-Papayanopolos, H., Morales-Cepeda, A., Sanchez, S., Lafleur, P., & Gómez, I. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-1992-4 · Cited by 24
“Interestingly, there is a correlation between the DSC analysis and DMA in the results of crystal polymorphism, which confirms the crystal structure of a-crystals, suggesting that the elastic modulus of the PLA/GTA-Ag-NPs samples in DMA is affected by the rearrangements of the molecular packing within the unit cell [31…”
BackgroundResult
Amorphous Fractions of Poly(lactic acid)
Righetti, M. C. (2017) · Advances in polymer science · doi:10.1007/12_2016_14 · Cited by 27
Development of PLA/Lignin Bio-Composites Compatibilized by Ethylene Glycol Diglycidyl Ether and Poly (ethylene glycol) Diglycidyl Ether
Shar, A. S., Wang, N., Chen, T., Zhao, X.-Y., & Weng, Y.-J. (2023) · Polymers · doi:10.3390/polym15204049 · Cited by 23
Effect of thermal annealing and filler ball-milling on the properties of highly filled polylactic acid/pecan (Carya illinoinensis) nutshell biocomposites.
Agustin-Salazar, S., Ricciulli, M., Ambrogi, V., Cerruti, P., & Scarinzi, G. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.12.101 · Cited by 23
The properties of chemical cross-linked poly(lactic acid) by bis(tert-butyl dioxy isopropyl) benzene
Ai, X., Wang, D., Li, X., Pan, H., Kong, J., Yang, H., Zhang, H., & Dong, L. (2018) · Polymer Bulletin · doi:10.1007/s00289-018-2351-9 · Cited by 24
“After adding BIBP, double-melting peaks appeared, due to the α and α’, the two forms the crystal generated [21, 22].”
Background
Poly(L-lactic acid) metal organic framework composites. Mass transport properties
Elangovan, D., Nidoni, U., Yuzay, I. E., Selke, S., & Auras, R. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201378u · Cited by 23
Warpage in Material Extrusion Additive Manufacturing of Amorphous and Semicrystalline Polymers
Zerriouh, A., Deghiche, A., Benayache, W., Hashemi, T., Bernardi, A., Liparoti, S., Lorenzo, M. D. D., & Cavallo, D. (2025) · Macromolecular materials and engineering (Print) · doi:10.1002/mame.202500172 · Cited by 22
Self-citation
Effect of stereo-complexation on crystallization behavior and barrier properties of poly-lactide
Li, W., Cao, J., Fu, L., Liu, F., Huang, Y., He, Y., Jiang, L., & Dan, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129834 · Cited by 22
Crystallization, structure and properties of polylactide/ladder poly(silsesquioxane) blends
Herc, A. S., Bojda, J., Nowacka, M., Lewiński, P., Maniukiewicz, W., Piórkowska, E., & Kowalewska, A. (2020) · Polymer · doi:10.1016/j.polymer.2020.122563 · Cited by 22
Flash DSC study on the annealing behaviors of poly(l-lactide acid) crystallized in the low temperature region
Lv, R., He, Y., Wang, J., Wang, J., Hu, J. S., Zhang, J., & Hu, W. (2019) · Polymer · doi:10.1016/j.polymer.2019.04.061 · Cited by 27
Highly Efficient “Composite Barrier Wall” Consisting of Concentrated Graphene Oxide Nanosheets and Impermeable Crystalline Structure for Poly(lactic acid) Nanocomposite Films
Huang, H.-D., Zhou, S., Zhou, D.-L., Ren, P., Xu, J.-Z., Ji, X., & Li, Z.-M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02168 · Cited by 22
Improving the Barrier Properties of Poly(Lactic Acid) by Blending with Poly(Ethylene-Co-Vinyl Alcohol)
Gui, Z., Zhang, W.-Y., Lu, C., & Cheng, S.-J. (2013) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2012.720180 · Cited by 22
“Crystallites can decrease the amount of amorphous phase and increase the tortuosity of the transport path for gas molecules.[3,4] Therefore, altering the crystallinity and the crystalline morphology can adjust the barrier properties of PLA.”
Background
Effect of molecular weight on crystallization behavior of poly (lactic acid) under isotherm and non‐isotherm conditions
Zirak, N., Shirinbayan, M., Farzaneh, S., & Tcharkhtchi, A. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5603 · Cited by 22
Melt extension-induced shish-kebabs with heterogeneous spatial distribution of crystalline polymorphs in lightly crosslinked poly(lactic acid)
Zhang, Z., Wang, X., Wang, Y., Shen, C., Liu, C., & Wang, Z. (2020) · Polymer · doi:10.1016/j.polymer.2020.122875 · Cited by 23
Crystallization of Poly(lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch5 · Cited by 24
Self-citation
Composites Based on Poly(Lactic Acid) (PLA) and SBA-15: Effect of Mesoporous Silica on Thermal Stability and on Isothermal Crystallization from Either Glass or Molten State
Díez‐Rodríguez, T. M., Blázquez‐Blázquez, E., Pérez, E., & Cerrada, M. L. (2020) · Polymers · doi:10.3390/polym12112743 · Cited by 21
“According to the literature [11,14,54], these profiles are typical for a majority of α’ crystallites in samples crystallized at 75 ◦C and of α crystals in samples crystallized at 85 ◦C.”
Background
Effect of crystallinity, crystal polymorphism, and graphene oxide nanosheets on the barrier properties of poly (l-lactic acid)
Khaki, A., Garmabi, H., Javadi, A., & Yahyaee, N. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.047 · Cited by 20
Correlation between Processing Parameters, Morphology, and Properties of Injection-Molded Polylactid Acid (PLA) Specimens at Different Length Scales
Meinig, L., Boldt, R., Spoerer, Y., Kuehnert, I., & Stommel, M. (2023) · Polymers · doi:10.3390/polym15030721 · Cited by 19
“This is because the amorphous phase transfers the load to the crystals and absorbs the imposed strain [32].”
Background
Viscoelastic, thermal and environmental characteristics of poly(lactic acid), linear low-density polyethylene and low-density polyethylene ternary blends and composites
Medjdoub, N., Guessoum, M., & Fois, M. (2017) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2016.1232547 · Cited by 19
“[41] studied water vapor permeability of a PLA film and found that the enhancement of the barrier property is attributed to the increase in the fraction of orthorhombic ordered PLA crystals that produces a tighter molecular packing of PLA chain segments, resulting in the reduction of the adsorbed water vapor diffusion…”
Background
Green, Sustainable, and Melt-Compoundable PLA composites reinforced with Spray-Dried lignocellulosic nanofibrils for enhanced barrier and mechanical properties
Su, T. Y. T., Aguiar, R., Sansone, N. D., Hao, C., Yan, N., & Lee, P. C. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163183 · Cited by 18
Lamellar Morphology of Disorder α′-Crystals of Poly( L -Lactic Acid)
Jariyavidyanont, K., Janke, A., Yu, Q., Thurn‐Albrecht, T., & Androsch, R. (2024) · Crystal Growth & Design · doi:10.1021/acs.cgd.3c01498 · Cited by 20
The reactive compatibilization of PLA/PP blends and improvement of PLA crystallization properties induced by in situ UV irradiation
Tang, W.-D., He, G.-J., Huang, W.-T., Zou, X.-L., Cao, X.-W., & Yin, X.-C. (2020) · CrystEngComm · doi:10.1039/d0ce01445a · Cited by 18
Fabrication of Poly(ε-caprolactone)-Based Biodegradable Packaging Materials with High Water Vapor Barrier Property
Ding, Y., Zhou, Q., Han, A., Zhou, H., Chen, R., & Guo, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05311 · Cited by 22
Willow Lignin Recovered from Hot-Water Extraction for the Production of Hydrogels and Thermoplastic Blends.
Nagardeolekar, A., Ovadias, M., Wang, K.-T., & Bujanović, B. (2020) · ChemSusChem · doi:10.1002/cssc.202001259 · Cited by 18
Physicochemical and mechanical properties of CO2 laser-modified biodegradable polymers for medical applications
Kobielarz, M., Gazińska, M., Tomanik, M., Stępak, B., Szustakiewicz, K., Filipiak, J., Antończak, A. J., & Pezowicz, C. (2019) · Polymer degradation and stability · doi:10.1016/j.polymdegradstab.2019.05.010 · Cited by 17
Thermal and barrier properties of stretched and annealed polylactide films
Dong, T., Yu, Z., Wu, J., Zhao, Z.-L., Yun, X.-Y., Wang, Y., Jin, Y., & Yang, J.-J. (2015) · Polymer Science Series A · doi:10.1134/s0965545x15060073 · Cited by 17
Characterization Of Biaxial Strain Of Poly(L-Lactide) Tubes
Løvdal, A. L. V., Andreasen, J. W., Mikkelsen, L., Agersted, K., & Almdal, K. (2016) · Polymer International · doi:10.1002/pi.5040 · Cited by 17
Quantitative DSC Assessment of the Polymorph-Specific Crystallinity of Poly(Lactic Acid) and the Impact of a Self-Assembling Nucleating Agent and PEG Plasticizer
Colaers, M., Thielemans, W., & Goderis, B. (2025) · Polymers · doi:10.3390/polym17091267 · Cited by 16
“Similarly, M. Cocca et al. [12] found that a reduced water vapor permeability correlates with an increased PLA crystallinity.”
Assessment of polylactide as optical material
Kesting, M. B., Meyer, J., & Seide, G. H. (2024) · Optical Materials X · doi:10.1016/j.omx.2024.100360 · Cited by 9
Modulating Barrier Properties of Stereocomplex Polylactide: The Polymorphism Mechanism and Its Relationship with Rigid Amorphous Fraction
Chen, Q., Auras, R. A., Kirkensgaard, J. J. K., & Uysal‐Unalan, I. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c12602 · Cited by 17
Thermomechanical Properties and Biodegradation Behavior of Itaconic Anhydride-Grafted PLA/Pecan Nutshell Biocomposites
Agustin-Salazar, S., Ricciulli, M., Ambrogi, V., Cerruti, P., & Scarinzi, G. (2022) · Polymers · doi:10.3390/polym14245532 · Cited by 16
“The latter was characterized by peak duplication, as reported in previous papers [14,42].”
Result
Prediction of tensile modulus from calorimetric melting curves of polylactic acid with pronounced cold crystallization ability
Molnár, J., Hertner-Horváth, A., & Menyhárd, A. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107112 · Cited by 16
Annealing effect on tensile property and hydrolytic degradation of biodegradable poly(lactic acid) reactive blend with poly(trimethylene terephthalate) by two-step blending procedure
Kultravut, K., Kuboyama, K., & Ougizawa, T. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109228 · Cited by 19
Poly(l-Lactic Acid)/Pine Wood Bio-Based Composites
Dobrzyńska‐Mizera, M., Knitter, M., Woźniak-Braszak, A., Baranowski, M., Sterzyński, T., & Lorenzo, M. D. D. (2020) · Materials · doi:10.3390/ma13173776 · Cited by 16
“8◦, associated with the (110)/(200) and (203) lattice planes respectively, whose position shifts due to a varied ratio between α’- and α-crystals formed during crystallization of compression molded sheets [3,54,68,69].”
BackgroundMethodSelf-citation
Polymorphic Crystal Transition and Lamellae Structural Evolution of Poly( p-dioxanone) Induced by Annealing and Stretching.
Zheng, Y., Zhou, J., Bao, Y.-Z., Shan, G., & Pan, P.-J. (2019) · Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b12111 · Cited by 16
Toward Heat-Resistant and Transparent Poly(l-lactide) by Tailoring Crystallization with an Aliphatic Amide as a Nucleating Agent
Chen, X.-N., Yao, J.-M., Yu, J., Mi, M., Xu, Y.-C., & Bai, H.-W. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c02811 · Cited by 15
Short phosphate glass fiber - PLLA composite to promote bone mineralization.
Melo, P., Tarrant, E., Swift, T., Townshend, A., German, M., Ferreira, A., Gentile, P., & Dalgarno, K. (2019) · Materials Science and Engineering C: Materials for Biological Applications · doi:10.1016/j.msec.2019.109929 · Cited by 15
Formation of Mesomorphic Polymorph, Thermal-Induced Phase Transition, and Crystalline Structure-Dependent Degradable and Mechanical Properties of Poly(p-dioxanone)
Zheng, Y., Zhou, J., Du, F., Bao, Y., Shan, G., Zhang, L., Dong, H., & Pan, P. (2018) · Crystal Growth & Design · doi:10.1021/acs.cgd.8b01246 · Cited by 18
The crystallization and phase transition behaviors of asymmetric PLLA/PDLA blends: From the amorphous state
Wang, L., Feng, C., Zhou, D., Shao, J., Hou, H., & Li, G. (2018) · Polymer Crystallization · doi:10.1002/pcr2.10006 · Cited by 15
Unexpected observation of highly thermostable transcrystallinity of poly(lactic acid) induced by aligned carbon nanotubes
Chen, C., He, B., Wang, S., Yuan, G., & Zhang, L. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.12.012 · Cited by 25
Stability of electrically induced-polarization in poly (L-lactic) acid for bone regeneration
Barroca, N., Vilarinho, P., Fernandes, M., Sharma, P., & Gruverman, A. (2012) · doi:10.1063/1.4729619 · Cited by 15
Fabrication of a packaging film based on PLA blends: The evolution of physical, mechanical, and rheological properties
Attari, K., Molla‐Abbasi, P., & Rashidzadeh, B. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26612 · Cited by 15
Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness
Zhang, Z., Cui, S., Ma, R., Ye, Q., Sun, J., Wang, Y., Liu, C., & Wang, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126220 · Cited by 15
Biodegradable Poly(butylene adipate-co-terephthalate)/Poly(glycolic acid) Films: Effect of Poly(glycolic acid) Crystal on Mechanical and Barrier Properties
Pan, H., Wang, Y., Jia, S., Zhao, Y., Bian, J.-J., Yang, H., Hao, Y.-P., Han, L., & Zhang, H.-L. (2023) · Chinese Journal of Polymer Science · doi:10.1007/s10118-023-2934-2 · Cited by 14
Distinct dynamics of structural relaxation in the amorphous phase of poly(l-lactic acid) revealed by quiescent crystallization.
Monnier, X., Delpouve, N., & Saiter‐Fourcin, A. (2020) · Soft Matter · doi:10.1039/c9sm02541c · Cited by 14
Particle percolation in a poly(lactic acid)/calcium carbonate nanocomposite with a small amount of a secondary phase and its influence on the mechanical properties
Lee, J. M., Hong, J.-S., & Ahn, K. (2019) · Polymer Composites · doi:10.1002/pc.25263 · Cited by 14
Crystallinity and Property Enhancements in Neat Polylactic Acid by Chilled Extrusion: Solid‐State Shear Pulverization and Solid‐State/Melt Extrusion
Blumer, E. M., Lynch, B. B., Fielding, A. S., & Wakabayashi, K. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25054 · Cited by 16
Diverse nature of femtosecond laser ablation of poly(L-lactide) and the influence of filamentation on the polymer crystallization behaviour
Stepak, B. D., Gazińska, M. A., Nejbauer, M., Stepanenko, Y., & Antończak, A. J. (2019) · Scientific Reports · doi:10.1038/s41598-019-39640-1 · Cited by 12
Barrier properties of poly(lactic acid)/cloisite 30B composites and their relation between oxygen permeability and relative humidity
Bartel, M., Remde, H., Böhn, A., & Ganster, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44424 · Cited by 14
Multilayer Polymer Films
Ajitha, A. R., Aswathi, M. K., Maria, H., Izdebska, J., & Thomas, S. (2016) · doi:10.1007/978-94-017-7324-9_8 · Cited by 14
Temperature-dependent Crystallization and Phase Transition of Poly(L-lactic acid)/CO2 Complex Crystals
Zheng, Y., Zhang, C., Bao, Y., Shan, G., & Pan, P. (2020) · Chinese Journal of Polymer Science · doi:10.1007/s10118-021-2502-6 · Cited by 14
Local Reversible Melting in Semicrystalline Poly(dimethylsiloxane): A High-Field Electron Paramagnetic Resonance Study
Massa, C., Pizzanelli, S., Bercu, V., Pardi, L., & Leporini, D. (2017) · doi:10.1021/acs.macromol.7b00627 · Cited by 13
Optimizing crystallinity of engineered poly(lactic acid)/poly(butylene succinate) blends: The role of single and multiple nucleating agents
Barletta, M., & Pizzi, E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50236 · Cited by 16
Carvacrol- and Cardanol-Containing 1,3-Dioxolan-4-ones as Comonomers for the Synthesis of Functional Polylactide-Based Materials
Gazzotti, S., Ortenzi, M. A., Farina, H., Disimino, M., & Silvani, A. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01537 · Cited by 18
Enhancement of crystallinity and toughness of poly (l‐lactic acid) influenced by Ag nanoparticles processed by twin screw extruder
Bautista-Del-Ángel, J. E., Morales-Cepeda, A. B., Lozano-Ramírez, T., Sanchez, S., Karami, S., & Lafleur, P. (2018) · Polymer Composites · doi:10.1002/pc.24217 · Cited by 12
The effect of halloysite nanotubes and N,N′-ethylenebis (stearamide) on morphology and properties of polylactide nanocomposites with crystalline matrix
Pluta, M., Bojda, J., Piórkowska, E., Murariu, M., Bonnaud, L., & Dúbois, P. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.09.013 · Cited by 12
“It is worth adding that the polymorphic structure markedly influences the mechanical properties of PLLA; the a modification results in a higher Young's modulus, however, in a lower elongation at break compared to the a0 form [43].”
Result
Improving the barrier character of poly(lactide)/phenoxy immiscible blend using poly(lactide-co-ɛ-caprolactone) block copolymer as a compatibilizer
Sangroniz, A., Chaos, A., Garcia, Y., Fernández, J., Iriarte, M., & Etxeberria, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45396 · Cited by 12
Cell behaviour in new poly(l-lactic acid) films with crystallinity gradients
Bernardo, V., Luz, G., Alves, N. M., & Mano, J. (2012) · doi:10.1016/j.matlet.2012.07.088 · Cited by 12
“It is known that crystallinity affects the mechanical properties [5,6], the biological response [7,8] and the biodegradation profile of PLLA [9].”
Background
The Effect of Thermoforming of PLA-PHBV Films on the Morphology and Gas Barrier Properties
Guinault, A., Nguyen, A. S., Miquelard-Garnier, G., Jouannet, D., Grandmontagne, A., & Sollogoub, C. (2012) · doi:10.4028/www.scientific.net/kem.504-506.1135 · Cited by 12
Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate)
Hallavant, K., Soccio, M., Guidotti, G., Lotti, N., Esposito, A., & Saiter, A. (2024) · Polymers · doi:10.3390/polym16192792 · Cited by 13
“…may affect their crystalline phase not only quantitatively, but also qualitatively, worsening the intrinsic complexity due to chemistry (polymorphism [44–47], imperfect chain folding with extended coupling between the crystalline and amorphous domains [48–50], development of mesophases [51,52]...).”
Background
Glassy structure affected cold-crystallization behavior and structure of poly(lactic acid)
Zhou, C.-B., Zhang, Y., Hu, C.-L., Meng, Y., Li, H.-F., Li, J.-Q., Yu, D.-H., Christiansen, J. D. C., & Jiang, S.-C. (2022) · Journal of polymer research · doi:10.1007/s10965-022-03077-4 · Cited by 11
“With Tcc not below 120 °C, there is only α crystal formed and no crystal form transition occurs with Tcc, thus the Lc of PLA lamellae composed of only α crystal increases with Tcc increasing, which follows the crystallization law regarding lamellar thickness with crystallization temperature of all other crystalline po…”
Background
Influence of Thermal Annealing on the Sinterability of Different Grades of Polylactide Microspheres Dedicated for Laser Sintering
Gazińska, M., Krokos, A., Kryszak, B., Dzienny, P., Olejarczyk, M., Gruber, P., Kwiatkowski, R., & Antończak, A. J. (2021) · Materials · doi:10.3390/ma14112999 · Cited by 11
“Crystal form of PLLA significantly affect the application–wise properties, such as mechanical and barrier properties [23,24].”
Background
Texture Induced by Molecular Weight Dispersity: Polymorphism within Poly(L-lactic acid) Spherulites
Hu, D.-P., Chen, M., Yang, Y., & Li, H. (2020) · Chinese Journal of Polymer Science · doi:10.1007/s10118-020-2464-0 · Cited by 11
A free radical assisted strategy for preparing functionalized carbon nanotubes as a highly efficient nucleating agent for poly(L-lactide)
Zhang, Z.-J., Cui, W., Xu, H., Xie, L., Liu, H.-J., Zhu, L.-M., Li, H., & Ran, R. (2015) · RSC Advances · doi:10.1039/c4ra15189e · Cited by 11
Enhanced processability and mechanical properties of poly-ether-ether-ketone/nano-silicon nitride composite scaffolds fabricated by laser powder bed fusion
Wang, H.-Z., Chen, P., Su, J., Li, Y., Tian, Y., Qi, L., Yan, C.-Z., & Shi, Y.-S. (2025) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2024.12.051 · Cited by 10
CO2-diffusion controlled mesophase formation in poly(l-lactic acid) and its effect on cold-crystallization
Longo, A., Maio, E. D., Du, F., Androsch, R., & Lorenzo, M. L. D. (2023) · Polymer · doi:10.1016/j.polymer.2023.126380 · Cited by 12
Self-citation
Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media.
Liu, J., Wang, B., Liu, W., Hu, X., Zhang, C., Zhou, Z.-Y., Lang, J., Wu, G.-S., Zhang, Y., Yang, J.-K., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124987 · Cited by 10
Approaches on the Complex Crystallization in PLA/Babassu Based on Modulated Differential Scanning Calorimetry Analyses
Nicácio, P., Severo, A. M. C., Barros, A. B. S., Albuquerque, A., Wellen, R., & Koschek, K. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02468-4 · Cited by 10
“Their development depends on the processing and heating/cooling parameters [13, 14].”
Background
Effect of the Addition of Natural Rice Bran Oil on the Thermal, Mechanical, Morphological and Viscoelastic Properties of Poly(Lactic Acid)
Righetti, M., Cinelli, P., Mallegni, N., Massa, C. A., Irakli, M., & Lazzeri, A. (2019) · Sustainability · doi:10.3390/su11102783 · Cited by 10
Mesomorphic phase formation of plasticized poly( l ‐lactic acid)
Koido, S., Kawai, T., Kuroda, S., Nishida, K., Kanaya, T., Katô, M., Kurose, T., & Nakajima, K. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39762 · Cited by 11
A Relatively Simple Look at the Rather Complex Crystallization Kinetics of PLLA
López‐Beceiro, J., Díaz‐Díaz, A., Fernández-Pérez, E., Ferreira, I., Focke, W. W., & Artiaga, R. (2023) · Polymers · doi:10.3390/polym15081880 · Cited by 10
“Thus, considering other reports, the predominant crystal structure in the low range of t mperatures covered in this work is α′ [3].”
BackgroundInfluential
Preparation of oriented poly(lactic acid) thin films by a combination of high temperature rubbing and thermal annealing: Impact of annealing parameters on structure, polymorphism and morphology
Brosset, M., Herrmann, L., Falher, T., & Brinkmann, M. (2023) · Journal of Polymer Science · doi:10.1002/pol.20220740 · Cited by 10
Simultaneous Measurement of Glass-Transition Temperature and Crystallinity of As-Prepared Polymeric Films from Restitution
Park, J., Han, S., Park, H., Lee, J., Cho, S., Seo, M., Kim, B. J., & Choi, S. Q. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01477 · Cited by 9
Polyethylene oxide enhances the ductility and toughness of polylactic acid: the role of mesophase
Wang, Z., Zhang, C., Zhang, Z., Chen, X., Wang, X., Wen, M., Chen, B., Cao, W., & Liu, C. (2020) · Soft Matter · doi:10.1039/d0sm00671h · Cited by 20
Constrained and Heterogeneous Dynamics in the Mobile and the Rigid Amorphous Fractions of Poly(dimethylsiloxane): A Multifrequency High-Field Electron Paramagnetic Resonance Study
Massa, C., Pizzanelli, S., Bercu, V., Pardi, L., & Leporini, D. (2014) · doi:10.1021/ma501565z · Cited by 9

Authors: Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V.
Affiliations: National Research Council (IT)
Corresponding author: Cocca, Mariacristina
ORCID: Cocca, Mariacristina
Lorenzo, Maria Laura Di
Malinconico, Mario
Venue: European Polymer Journal
Publisher: Elsevier BV
Published: 2011-05
Volume: 47
Issue: 5
Pages: 1073-1080
ISSN: 0014-3057 (ISSN-L)
DOI: 10.1016/j.eurpolymj.2011.02.009
OpenAlex: W2035512535
Cited by: 296
References: 0
Citations by year: 2026: 11 · 2025: 22 · 2024: 19 · 2023: 26 · 2022: 29 · 2021: 20 · 2020: 32 · 2019: 19 · 2018: 14 · 2017: 23 · 2016: 22 · 2015: 13 · 2014: 11 · 2013: 21 · 2012: 11
FWCI: 12.55
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
Locations: European Polymer Journal (publishedVersion)
Funders: HORTIBIOPACK (232551)
Topics: Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
Keywords: poly(L-lactic acid), crystal polymorphism, water vapor barrier, mechanical properties, crystallinity, annealing, Young's modulus, elongation at break, chain packing, conformational disorder, mesophases, biodegradable films

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Metadata

Record

About these checks