The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Compatibilization in bio-based and biodegradable polymer blends
Open accessAbstract
The production and use of biopolymers increases continuously with a very high rate thus all information on these materials is very important. This feature article first defines the terms used in the area then discusses the distinction between degradation and biodegradation as well as their importance for practice. Biopolymers often have inferior properties compared to commodity polymers. Modification is a way to improve properties and achieve property combinations required for specific applications. One technique is blending which allows considerable improvement in the impact resistance of brittle polymers. However, further study is needed on the miscibility–structure–property relationships of these materials to utilize all potentials of the approach. The chemical structure of biopolymers opens up possibilities to their reactive modification. Copolymerization, grafting, trans-esterification, the use of reactive coupling agents have all been utilized with success to achieve polymers and blends with improved properties. Several examples are shown for the various approaches and their outcome. Biopolymers and their blends are applied successfully in several areas from agriculture to consumer goods, packaging and automotive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Polymer Chemistry.
Huggins, M. L. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a090 · Cited by 16,550
Principles of polymer chemistry
(1995) · Choice Reviews Online · doi:10.5860/choice.33-2140 · Cited by 15,218
Thermodynamics of High Polymer Solutions
Flory, P. J. (1942) · The Journal of Chemical Physics · doi:10.1063/1.1723621 · Cited by 4,374
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
When will fossil fuel reserves be diminished?
Shafiee, S., & Topal, E. (2009) · Energy Policy · doi:10.1016/j.enpol.2008.08.016 · Cited by 2,061
Solutions of Long Chain Compounds
Huggins, M. L. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750930 · Cited by 1,919
Biopolymer-Based Hydrogels As Scaffolds for Tissue Engineering Applications: A Review
Van Vlierberghe, S., Dubruel, P., & Schacht, E. (2011) · Biomacromolecules · doi:10.1021/bm200083n · Cited by 1,716
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Chandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Nishi, T., & Wang, T. T. (1975) · Macromolecules · doi:10.1021/ma60048a040 · Cited by 1,317
Mano, J. F., Silva, G. A., Azevedo, H. S., Malafaya, P. B., Sousa, R. A., Silva, S. S., Boesel, L. F., Oliveira, J. M., Santos, T. C., Marques, A. P., et al. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0220 · Cited by 1,140
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
Current research on the blends of natural and synthetic polymers as new biomaterials: Review
Sionkowska, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.05.003 · Cited by 970
Strategies for compatibilization of polymer blends
Koning, C. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 881
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
On the Statistical Thermodynamics of Spherical and Chain Molecule Fluids
Simha, R., & Somcynsky, T. (1969) · Macromolecules · doi:10.1021/ma60010a005 · Cited by 651
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
Polymer alloys and blends : thermodynamics and rheology
Utracki, L. A. (1990) · Medical Entomology and Zoology · Cited by 575
Biopolymer-based microgels/nanogels for drug delivery applications
Oh, J. K., Lee, D. I., & Park, J. M. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.08.001 · Cited by 542
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Influence of interface interaction on the ultimate tensile properties of polymer composites
Pukánszky, B. (1990) · Composites · doi:10.1016/0010-4361(90)90240-w · Cited by 538
Self-citationMorphology and properties of compatibilized polylactide/thermoplastic starch blends
Huneault, M. A., & Li, H. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 506
Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride
Zhang, J.-F., & Sun, X. (2004) · Biomacromolecules · doi:10.1021/bm0400022 · Cited by 494
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Depletion of fossil fuels and the impacts of global warming
Hoel, M., & Kverndokk, S. (1996) · Resource and Energy Economics · doi:10.1016/0928-7655(96)00005-x · Cited by 432
Lourdin, D., Coignard, L., Bizot, H., & Colonna, P. (1997) · Polymer · doi:10.1016/s0032-3861(97)00082-7 · Cited by 429
Interfaces in Polymer, Ceramic and Metal Matrix Composites
Marshall, I. H. (1989) · Composite Structures · doi:10.1016/0263-8223(89)90081-0 · Cited by 406
Biological hydrogels as selective diffusion barriers
Lieleg, O., & Ribbeck, K. (2011) · Trends in Cell Biology · doi:10.1016/j.tcb.2011.06.002 · Cited by 387
Biomaterials for tissue engineering
Kim, B.-S., Baez, C. E., & Atala, A. (2000) · World Journal of Urology · doi:10.1007/s003450050002 · Cited by 374
Zhang, M., & Thomas, N. L. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20235 · Cited by 373
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone)
Wang, L., Ma, W., Gross, R. A., & McCarthy, S. P. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00196-1 · Cited by 339
Scott, G. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00182-2 · Cited by 330
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Cai, H., Dave, V., Gross, R. A., & McCarthy, S. P. (1996) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19961130)34:16<2701::aid-polb2>3.0.co;2-s · Cited by 290
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Bhatia, A., Gupta, R. K., Bhattacharya, S. N., & Choi, H. J. (2007) · RMIT Research Repository (RMIT University Library) · Cited by 272
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Physical properties and biodegradability of maleated-polycaprolactone/starch composite
Wu, C.-S. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00393-2 · Cited by 250
Maleation of polylactide (PLA) by reactive extrusion
Carlson, D., Nie, L., Narayan, R., & Dubois, P. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990425)72:4<477::aid-app3>3.0.co;2-q · Cited by 242
Phase behavior and morphology in blends of poly(L‐lactic acid) and poly(butylene succinate)
Park, J. W., & Im, S. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10923 · Cited by 240
Chiellini, E., Corti, A., D'Antone, S., & Baciu, R. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.03.022 · Cited by 231
Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32956 · Cited by 226
Ma, P., Hristova-Bogaerds, D. G., Goossens, J. G. P., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 223
Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219
Wang, Y., & Hillmyer, M. A. (2001) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1254 · Cited by 212
Preparation and characterisation of compatibilised polycaprolactone/starch composites
Avella, M., Errico, M. E., Laurienzo, P., Martuscelli, E., Raimo, M., & Rimedio, R. (2000) · Polymer · doi:10.1016/s0032-3861(99)00663-1 · Cited by 205
Properties of linear poly(lactic acid)/polyethylene glycol blends
Sungsanit, K., Kao, N., & Bhattacharya, S. N. (2012) · Polymer Engineering & Science · doi:10.1002/pen.22052 · Cited by 196
Characterization of polyvinyl alcohol/gelatin blend hydrogel films for biomedical applications
Pawde, S. M., & Deshmukh, K. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28454 · Cited by 190
Preparation and characterization of thermoplastic starch/PLA blends by one‐step reactive extrusion
Wang, N., Yu, J., & Ma, X. (2007) · Polymer International · doi:10.1002/pi.2302 · Cited by 189
Extrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends
Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 188
Toughness enhancement of poly(lactic acid) by melt blending with natural rubber
Jaratrotkamjorn, R., Khaokong, C., & Tanrattanakul, V. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.35617 · Cited by 181
Carné Sánchez, A., & Collinson, S. R. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.07.013 · Cited by 168
Ionic liquids: Media for starch dissolution, plasticization and modification
Wilpiszewska, K., & Spychaj, T. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.001 · Cited by 168
Zeng, J.-B., Jiao, L., Li, Y.-D., Srinivasan, M., Li, T., & Wang, Y.-Z. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.051 · Cited by 165
Filling of poly(lactic acid) with native starch
Jacobsen, S., & Fritz, H. G. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10680 · Cited by 162
Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 160
Poly(hydroxybutyrate)/poly(butylene succinate) blends: miscibility and nonisothermal crystallization
Qiu, Z., Ikehara, T., & Nishi, T. (2003) · Polymer · doi:10.1016/s0032-3861(03)00150-2 · Cited by 159
Wu, D., Yuan, L., Laredo, E., Zhang, M., & Zhou, W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2022288 · Cited by 159
Characterization of polyhydroxybutyrate-hydroxyvalerate (PHB-HV)/maize starch blend films
dos Reis, K. C., Pereira, J. R. D., Smith, A. C., de Carvalho, C. W. P., Wellner, N., & Yakimets, I. (2008) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2008.04.022 · Cited by 153
Reactive Blending of Biodegradable Polymers: PLA and Starch
Jun, C. L. (2000) · Journal of Polymers and the Environment · doi:10.1023/a:1010172112118 · Cited by 151
Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends
Gérard, T., & Budtova, T. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.03.015 · Cited by 151
Aliphatic polyester-grafted starch-like polysaccharides by ring-opening polymerization
Dúbois, P., Krishnan, M. R., & Narayan, R. (1999) · Polymer · doi:10.1016/s0032-3861(98)00110-4 · Cited by 149
Hassouna, F., Raquez, J., Addiego, F., Toniazzo, V., Dúbois, P., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.001 · Cited by 144
Biodegradable compositions by reactive processing of aliphatic polyester/polysaccharide blends
Dúbois, P., & Narayan, R. (2003) · Macromolecular Symposia · doi:10.1002/masy.200350820 · Cited by 140
Vilay, V., Mariatti, M., Ahmad, Z., Pasomsouk, K., & Todo, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30683 · Cited by 140
Juntuek, P., Ruksakulpiwat, Y., Chumsamrong, P., & Ruksakulpiwat, Y. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.36263 · Cited by 128
Yokesahachart, C., & Yoksan, R. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.020 · Cited by 126
Morphology and miscibility of chitosan/soy protein blended membranes
Silva, S. S., Goodfellow, B. J., Benesch, J., Rocha, J., Mano, J. F., & Reis, R. L. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.02.023 · Cited by 125
Effect of chain extension on the properties of PLA/TPS blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33981 · Cited by 123
Thermal Properties and Morphology of Biodegradable PLA/Starch Compatibilized Blends
Jang, W.-Y., Shin, B. Y., Lee, T. J., & Narayan, R. (2007) · Journal of Industrial and Engineering Chemistry · Cited by 121
Focarete, M. L., Scandola, M., Dobrzynski, P., & Kowalczuk, M. (2002) · Macromolecules · doi:10.1021/ma020940z · Cited by 119
Kim, W. N., & Burns, C. M. (1987) · Macromolecules · doi:10.1021/ma00174a030 · Cited by 116
Innovative plasticized starch films modified with waterborne polyurethane from renewable resources
Lu, Y., Tighzert, L., Berzin, F., & Rondot, S. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.04.013 · Cited by 115
Yao, M., Deng, H., Mai, F., Wang, K., Zhang, Q., Chen, F., & Fu, Q. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.92 · Cited by 113
Preparation, characterization and biodegradation of biopolymer nanocomposites based on fumed silica
Fukushima, K., Tabuani, D., Abbate, C., Arena, M., & Rizzarelli, P. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.10.027 · Cited by 112
Viscoelastic interfacial properties of compatibilized poly(ε‐caprolactone)/polylactide blend
Wu, D., Zhang, Y., Yuan, L., Zhang, M., & Zhou, W. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21952 · Cited by 111
Preparation and properties of polyhydroxybutyrate blended with different types of starch
Zhang, M., & Thomas, N. L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30991 · Cited by 111
Lovera, D., Marquez, L., Balsamo, V., Taddei, A., Castelli, C., & Müller, A. J. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700011 · Cited by 102
Furukawa, T., Sato, H., Murakami, R., Zhang, J., Noda, I., Ochiai, S., & Ozaki, Y. (2007) · Polymer · doi:10.1016/j.polymer.2007.01.020 · Cited by 101
Tsuji, H., Yamada, T., Suzuki, M., & Itsuno, S. (2003) · Polymer International · doi:10.1002/pi.1093 · Cited by 101
Partially nanofibrous architecture of 3D tissue engineering scaffolds
Wei, G., & Ma, P. X. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.012 · Cited by 100
Thermal degradation and physical aging of poly(lactic acid) and its blends with starch
Acioli‐Moura, R., & Sun, X. S. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21019 · Cited by 99
Effect of starch addition on compression‐molded poly(3‐hydroxybutyrate)/starch blends
Thiré, R. M. D. S. M., Ribeiro, T. A. A., & Andrade, C. T. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23215 · Cited by 97
Preparation and properties of biodegradable thermoplastic starch/poly(hydroxy butyrate) blends
Lai, S., Don, T., & Huang, Y. ‐. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23085 · Cited by 95
Preparation and characterization of hexanoyl chitosan/polylactide blend films
Peesan, M., Supaphol, P., & Rujiravanit, R. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.01.008 · Cited by 92
Maglio, G., Malinconico, M., Migliozzi, A., & Groeninckx, G. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300150 · Cited by 91
Han, L., Han, C., Zhang, H., Chen, S., & Dong, L. (2012) · Polymer Composites · doi:10.1002/pc.22213 · Cited by 90
Parulekar, Y., & Mohanty, A. K. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700125 · Cited by 86
Badia-Valiente, J. D., Strömberg, E., Ribes-Greus, A., & Karlsson, S. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.05.001 · Cited by 85
Yuan, H., Liu, Z., & Ren, J. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21287 · Cited by 84
Biodegradable polymer blends of poly(3-hydroxybutyrate) and starch acetate
Zhang, L., Deng, X., Zhao, S., & Huang, Z. (1997) · Polymer International · doi:10.1002/(sici)1097-0126(199709)44:1<104::aid-pi812>3.0.co;2-# · Cited by 81
Effect of P(lLA-co-?CL) on the compatibility and crystallization behavior of PCL/PLLA blends
Kim, C.-H., Cho, K. Y., Choi, E., & Park, J.-K. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000705)77:1<226::aid-app29>3.0.co;2-8 · Cited by 79
Toughening of polylactide by melt blending with methyl methacrylate–butadiene–styrene copolymer
Zhang, H., Liu, N., Ran, X., Han, C., Han, L., Zhuang, Y., & Dong, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36952 · Cited by 78
Cai, Q., Wan, Y., Bei, J., & Wang, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00199-6 · Cited by 76
Shin, B. Y., Jang, S. H., & Kim, B. S. (2011) · Polymer Engineering and Science · doi:10.1002/pen.21896 · Cited by 69
Takagi, Y., Yasuda, R., Yamaoka, M., & Yamané, T. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20734 · Cited by 67
Some Properties ofPoly(3-hydroxybutyrate)-Poly(3-hydroxyvalerate) Blends
Gassner, F., & Owen, A. J. (1996) · Polymer International · doi:10.1002/(sici)1097-0126(199603)39:3<175::aid-pi472>3.0.co;2-0 · Cited by 66
Random aliphatic copolyesters as new biodegradable impact modifiers for polylactide materials
Odent, J., Raquez, J., Duquesne, E., & Dúbois, P. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.11.002 · Cited by 66
Polyurethane toughened polylactide
Yuan, Y., & Ruckenstein, E. (1998) · Polymer Bulletin · doi:10.1007/s002890050280 · Cited by 66
Controlling protein release from scaffolds using polymer blends and composites
Ginty, P. J., Barry, J. J. A., White, L. J., Howdle, S. M., & Shakesheff, K. M. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.05.023 · Cited by 65
Structure of Amorphous Starch. 2. Molecular Interactions with Water
Trommsdorff, U. R., & Tomka, I. (1995) · Macromolecules · doi:10.1021/ma00122a022 · Cited by 64
Plasticizer effect of novel PBS ionomer in PLA/PBS ionomer blends
Park, S. B., Hwang, S. Y., Moon, C.-W., Im, S. S., & Yoo, E.-S. (2010) · Macromolecular Research · doi:10.1007/s13233-010-0512-2 · Cited by 62
Biaxial Orientation of Polylactide/Thermoplastic Starch Blends
Chapleau, N., Huneault, M. A., & Li, H. (2007) · International Polymer Processing · doi:10.3139/217.2070 · Cited by 62
Hollow fibers made from a poly(3-hydroxybutyrate)/poly-ε-caprolactone blend
Hinüber, C., Haussler, L., Vogel, R., Brünig, H., Heinrich, G., & Werner, C. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.62 · Cited by 61
Vidéki, B., Klébert, S., & Pukánszky, B. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21121 · Cited by 59
Self-citationModi, S. J., Koelling, K. W., & Vodovotz, Y. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35343 · Cited by 58
THERMAL AND MECHANICAL PROPERTIES OF POLY(LACTIC ACID) AND STARCH BLENDS WITH VARIOUS LASTICIZERS
Ke, T., & Sun, X. (2001) · Transactions of the ASAE · doi:10.13031/2013.6228 · Cited by 58
Sahoo, S., Sasmal, A., Sahoo, D., & Nayak, P. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32474 · Cited by 56
Vilay, V., Mariatti, M., Ahmad, Z., Pasomsouk, K., & Todo, M. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2010.07.079 · Cited by 55
Suttiwijitpukdee, N., Sato, H., Unger, M. V., & Ozaki, Y. (2012) · Macromolecules · doi:10.1021/ma201598s · Cited by 55
Miscibility of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(vinyl chloride) blends
Choe, S., Cha, Y., Lee, H.-S., Yoon, J. S., & Choi, H. J. (1995) · Polymer · doi:10.1016/0032-3861(96)81624-7 · Cited by 53
Zhang, K., Ran, X., Wang, X., Han, C., Han, L., Wen, X., Zhuang, Y., & Dong, L. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22009 · Cited by 52
Hatakeyama, H., Yoshida, T., & Hatakeyama, T. (2000) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010140129888 · Cited by 50
Gunaratne, L. M. W. K., & Shanks, R. A. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21051 · Cited by 50
Mechanical, thermal, and biodegradability properties of PLA/modified starch blends
Gao, H., Hu, S., Su, F., Zhang, J., & Tang, G. (2011) · Polymer Composites · doi:10.1002/pc.21241 · Cited by 50
Pereira, A. G. B., Gouveia, R. F., de Carvalho, G. M., Rubira, A. F., & Muniz, E. C. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.09.009 · Cited by 49
Grafting of caprolacton to cellulose acetate by reactive processing
Vidéki, B., Klébert, S., & Pukánszky, B. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.03.002 · Cited by 42
Self-citationRodríguez‐Pérez, M. Á., Simões, R. D., Román-Lorza, S., Álvarez-Láinez, M., Montoya, C., Constantino, C. J. L., & de Saja, J. A. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22046 · Cited by 40
Wood flour/polylactide biocomposites toughened with polyhydroxyalkanoates
Qiang, T., Yu, D., & Gao, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35224 · Cited by 39
Improvement of the deformative characteristics of poly-β-hydroxybutyrate by plasticization
Bibers, I., Tupureina, V., Dzene, A., & Kalniņš, M. (1999) · Mechanics of Composite Materials · doi:10.1007/bf02259726 · Cited by 38
Miscibility, structure and properties of PP/PIB blends
Szabó, P., Epacher, E., Földes, E., & Pukánszky, B. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.04.035 · Cited by 37
Self-citationKovács, J. G., & Tábi, T. (2011) · Polymer Engineering and Science · doi:10.1002/pen.21900 · Cited by 34
Cai, H., Yu, J., & Qiu, Z. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22069 · Cited by 32
Don, T., Chung, C.-Y., Lai, S., & Chiu, H. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21575 · Cited by 31
Lu, D., Xiao, C., Xu, S., & Ye, Y. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.52 · Cited by 25
Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate)
Ning, W., Xingxiang, Z., Jiugao, Y., & Jianming, F. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600903 · Cited by 22
Liao, H., & Wu, C.-S. (2007) · Designed Monomers & Polymers · doi:10.1163/156855507779763676 · Cited by 18
Paes, S. S., Yakimets, I., Wellner, N., Hill, S. E., Wilson, R. H., & Mitchell, J. R. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.10.003 · Cited by 12
Belhassen, R., Mendez, J. A., Boufi, S., López, J. P., Puig, J. M., Pèlach, M. À., & Mutjé, P. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30567 · Cited by 12
Phase diagrams in blends of poly(3-hydroxybutyric acid) with various aliphatic polyesters
Hsieh, Y., & Woo, E. M. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.56 · Cited by 11
Cited by
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
Zaaba, N. F., & Jaafar, M. (2020) · Polymer Engineering & Science · doi:10.1002/pen.25511 · Cited by 683
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review
Zhong, Y., Godwin, P., Jin, Y., & Xiao, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2019.11.002 · Cited by 509
Bio-based and biodegradable polymers - State-of-the-art, challenges and emerging trends
RameshKumar, S., Shaiju, P., O'Connor, K. E., & P, R. B. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.12.005 · Cited by 479
Metadata
- Authors
- Imre, B., & Pukánszky, B.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2013-06
- Volume
- 49
- Issue
- 6
- Pages
- 1215-1233
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W1973282653
- Cited by
- 613
- References
- 135
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.