An investigation into the crystalline morphology transitions in poly-L-lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The mechanical behaviour, crystalline and macromorphology structure development during uniaxial deformation and annealing of poly- l -lactic acid (PLLA), with varying strain rate and draw temperatures (Td) above Tg, have been investigated using small- and wide-angle X-ray scattering (SAXS/WAXS), microscopy, thermal and mechanical techniques. The mechanical behaviour of PLLA, was strongly dependent on Td where embrittlement and eventual failure were observed as Td was increased, during uniaxial drawing of the amorphous polymer. This was mirrored in the bulk surface morphology where crazing, microvoiding and cavitation occurred with increasing Td. SAXS/WAXS data showed that strain-induced crystallization occurs on drawing, but crystallite orientation decreased with increasing Td, due to chain relaxation at temperatures ≥30 °C above Tg. However, no long-range oriented lamellar macromorphology was observed post-draw directly and only developed in the samples that were step annealed at temperatures above Td. Also, the disordered α′ crystal form was observed post-draw at Td between 60 and 80 °C, whereas Td ≥ 90 °C, resulted in the ordered α crystal form directly. However, on annealing at temperatures of ≥110 °C, the α′-α crystal transition ensued and in all samples, an oriented lamellar macromorphology developed. Therefore, Td and post-draw annealing, have a significant influence on the mechanical properties, crystallinity and crystalline phase transformation in PLLA, which in-turn, affects the polymers medical and industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913 · cited 6×
“This peak is often seen in PLLA and is said to relate to the transition of the disordered-to-ordered α’- α crystal form [16,48,49].”
BackgroundInfluentialZhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679 · cited 1×
“The crystal structure of PLLA exists in three main forms, α, β and γ [9-12].”
BackgroundThe frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Remarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Cited by
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Liu, Y., Cao, H., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06514 · Cited by 29
Deformation of Poly-l-lactid acid (PLLA) under Uniaxial Tension and Plane-Strain Compression
Vozniak, A., & Bartczak, Z. (2021) · Polymers · doi:10.3390/polym13244432 · Cited by 11
“[37] assigned the peak located above 32◦ to the (018)α′ plane instead of to (1010).”
BackgroundInfluential
Metadata
- Authors
- Billimoria, K., Heeley, E. L., Parsons, N., & Figiel, Ł.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2018-04
- Volume
- 101
- Pages
- 127-139
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W2786958311
- Cited by
- 39
- References
- 7
- FWCI
- 1.46
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An investigation into the crystalline morphology transitions in poly-L-lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2018.01.031
- The paper
- Billimoria, K., Heeley, E. L., Parsons, N., & Figiel, Ł. (2018). An investigation into the crystalline morphology transitions in poly-L-lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2018.01.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.