The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Preparation of high thermal stability gelatin emulsion and its application in 3D printing
Abstract
Abstract In this study, the gelatin crosslinked by Transglutaminase (TG) was applied to stabilize food-grade high internal phase emulsions (HIPEs) by a facile one-step method. The influence of TG crosslinking time on the molecular weight distribution of gelatin and the microstructure, thermal stability and rheological properties of the HIPEs were investigated. The results showed that TG crosslinking effectively promoted the production of high weight molecular. The obtained HIPEs exhibited a uniform droplet diameter and a good storage stability. An excellent thermal stability was achieved among the HIPEs stabilized by TG-crosslinked gelatin. After heating at 90 °C and 121 °C for 20 min, there was little change in microstructure and viscosity when the crosslinking time reached 4 h, implying that it could be stored at room temperature through high temperature sterilization. In the rheological analysis, the HIPEs showed a higher viscosity and lower frequency dependence with the extension of the crosslinking time, suggesting its potential application in three dimensional (3D) printing. The subsequent 3D printing experiments also confirmed that the HIPEs had a good printing performance, and some 3D printing models with different colors could be successfully obtained. This study provides a facile industrialized method for gelatin-based HIPEs with high thermal stability, and supplies theoretical guidance for its practical application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Diañez, I., Gallegos, C., Brito-de la Fuente, E., Martínez, I., Valencia, C., Sánchez, M. C., Diaz, M. J., & Franco, J. M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.010 · Cited by 93
Cited by
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
Zhang, L., Zaky, A. A., Zhou, C., Chen, Y., Su, W., Wang, H., Abd El-Aty, A. M., & Tan, M. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107744 · Cited by 273
Self-citation3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Sun, C., Fu, J.-J., Tan, Z.-F., Zhang, G.-Y., Xu, X.-B., & Song, L. (2022) · LWT · doi:10.1016/j.lwt.2022.113465 · Cited by 84
Metadata
- Authors
- Du, J., Dai, H., Wang, H., Yu, Y., Zhu, H., Fu, Y., Ma, L., Peng, L., Li, L., Wang, Q., & Zhang, Y.
- Venue
- Food Hydrocolloids
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 113
- Pages
- 106536
- ISSN
- 0268-005X (ISSN-L)
- OpenAlex
- W3112078970
- Cited by
- 227
- References
- 2
- FWCI
- 16.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of high thermal stability gelatin emulsion and its application in 3D printing. https://app.cochat.ai/papers/10.1016/j.foodhyd.2020.106536
- The paper
- Du, J., Dai, H., Wang, H., Yu, Y., Zhu, H., Fu, Y., Ma, L., Peng, L., Li, L., Wang, Q., & Zhang, Y. (2021). Preparation of high thermal stability gelatin emulsion and its application in 3D printing. Food Hydrocolloids. https://doi.org/10.1016/j.foodhyd.2020.106536
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.