The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Improving 3D/4D printing characteristics of natural food gels by novel additives: A review
Abstract
Abstract 3D printing technology and its extension 4D printing technology have been extensively developed since it was proposed and applied to many industries, including aerospace, biomedical, and food fields. However, there are material limitations for 3D/4D food printing, as some natural food gels cannot be directly applied to 3D/4D food printing, and most natural food gels tend to have poor printing characteristics, which are difficult or impossible to print. Additives in food have a long history of application, which can change some properties of natural food gels. Suitable rheological property is the primary condition of 3D/4D food printing, most of the research is about improving the rheological property of ink, while the research on improving the thermal property, electrostatic property, nutritional property and sensory quality of ink (especially electrostatic property and nutritional property) is still insufficient. This article discusses the printing characteristics (rheological properties, thermal properties, electrostatic properties, nutritional properties, and sensory qualities) of natural food gels that are improved by additives in 3D/4D food printing, mainly from three types of additives: lipids, hydrocolloids, and carbohydrates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Self-citationHager, A.-S., & Arendt, E. K. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2012.12.021 · Cited by 301
Baiano, A. (2022) · Food Reviews International · doi:10.1080/87559129.2020.1762091 · Cited by 245
3D food printing: a categorised review of inks and their development
Voon, S. L., An, J., Wong, G., Zhang, Y., & Chua, C. K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1603508 · Cited by 175
Properties of 3D printed dough and optimization of printing parameters
Liu, Y., Liang, X., Saeed, A., Lan, W., & Qin, W. (2019) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2019.03.008 · Cited by 156
Diañez, I., Gallegos, C., Brito-de la Fuente, E., Martínez, I., Valencia, C., Sánchez, M. C., Diaz, M. J., & Franco, J. M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.010 · Cited by 93
Cited by
Yu, J., Wang, X.-Y., Li, D., Wang, L.-J., & Wang, Y. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107824 · Cited by 285
Abedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71
3D Printing of Materials and Printing Parameters with Animal Resources: A Review
Jeon, E. Y., Kim, Y., Yun, H.-J., Kim, B.-K., & Choi, Y.-S. (2024) · Food Science of Animal Resources · doi:10.5851/kosfa.2023.e73 · Cited by 19
Metadata
- Authors
- Chen, Y., Zhang, M., Sun, Y., & Phuhongsung, P.
- Venue
- Food Hydrocolloids
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 123
- Pages
- 107160
- ISSN
- 0268-005X (ISSN-L)
- OpenAlex
- W3198878770
- Cited by
- 195
- References
- 7
- FWCI
- 8.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improving 3D/4D printing characteristics of natural food gels by novel additives: A review. https://app.cochat.ai/papers/10.1016/j.foodhyd.2021.107160
- The paper
- Chen, Y., Zhang, M., Sun, Y., & Phuhongsung, P. (2022). Improving 3D/4D printing characteristics of natural food gels by novel additives: A review. Food Hydrocolloids. https://doi.org/10.1016/j.foodhyd.2021.107160
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.