The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Fate of inorganic material during hydrothermal carbonisation of biomass: Influence of feedstock on combustion behaviour of hydrochar
Abstract
A series of high moisture content biomass have been processed by hydrothermal carbonisation (HTC) in a batch reactor at two temperatures (200 °C and 250 °C). The feedstocks processed include food waste, secondary sewage sludge, AD press cake, microalgae, macroalgae and a fibre derived from municipal derived wastes. In addition, three lignocellulosic biomass including miscanthus, willow and oak wood have been processed under identical conditions. The yields and properties of the resulting hydrochars including their HHV, CHNS, mineral content and ash fusibility properties have been determined and compared with their starting biomass. Typical char yields for lignocellulosic material range between 58 and 70 wt% at 200 °C and reduce to 40–46 wt% at 250 °C. The behaviour and mass balance is however very feedstock dependent and the higher lignin biomass produce higher yields of hydrochar. There is a significant upgrading of the energy density of the hydrochars with calculated HHV ranging from typically 24 MJ kg −1 at 200 °C to 28–31 MJ kg −1 at 250 °C for lignocellulosic material. The exception is for sewage sludge and AD press cake which result in a significant solubilisation of organic matter. A significant removal of alkali metals is observed and this in turn changes the ash chemistry upon combustion. This change in ash chemistry has been shown to change the ash melting behaviour and the hemisphere temperatures (oxidising conditions) were seen to increase substantially. A number of predictive slagging and fouling indices have been used to evaluate the influence of the ash chemistry on the fuel combustion behaviour and this combined with the ash fusion testing has shown that HTC reduces the potential fouling and slagging in some of the resulting hydrochars if combusted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wagner, W., & Pruß, A. (2002) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1461829 · Cited by 4,884
Marschner's Mineral Nutrition of Higher Plants
(2012) · Elsevier eBooks · doi:10.1016/c2009-0-63043-9 · Cited by 4,337
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001 · cited 15×
“The increased level of gas production, along with increased char yield with longer residence times could be explained by on-going polymerisation of soluble fragments in the liquid phase which finally lead to precipitation of insoluble solids (Funke and Ziegler, 2010).”
BackgroundMethodInfluentialCombustion properties of biomass
Jenkins, B. M., Baxter, L. L., Miles, T. R., & Miles, T. R. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00059-3 · Cited by 1,938
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
The Handbook of Biomass Combustion and Co-firing
(2012) · doi:10.4324/9781849773041 · Cited by 1,423
Biomass combustion in fluidized bed boilers: Potential problems and remedies
Khan, A. A., de Jong, W., Jansens, P. J., & Spliethoff, H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.07.012 · Cited by 1,122
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Hydrothermal Carbonization (HTC) of Lignocellulosic Biomass
Hoekman, S. K., Broch, A., & Robbins, C. (2011) · Energy & Fuels · doi:10.1021/ef101745n · Cited by 726
The Dielectric Constant of Water and Debye-Hückel Limiting Law Slopes
Archer, D. G., & Wang, P. (1990) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555853 · Cited by 679
Classification of macroalgae as fuel and its thermochemical behaviour
ROSS, A., JONES, J., KUBACKI, M., & BRIDGEMAN, T. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.11.036 · Cited by 641
Self-citationThe Ionization Constant of Water over Wide Ranges of Temperature and Density
Bandura, A. V., & Lvov, S. N. (2006) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1928231 · Cited by 640
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Titirici, M.-M., Thomas, A., & Antonietti, M. (2007) · New Journal of Chemistry · doi:10.1039/b616045j · Cited by 481
Parshetti, G. K., Kent Hoekman, S., & Balasubramanian, R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.09.042 · Cited by 476
Characterising ash of biomass and waste
Tortosa Masiá, A. A., Buhre, B. J. P., Gupta, R. P., & Wall, T. F. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.06.011 · Cited by 439
Deng, L., Zhang, T., & Che, D. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.10.006 · Cited by 308
Chemical forms of ash-forming elements in woody biomass fuels
Werkelin, J., Skrifvars, B.-J., Zevenhoven, M., Holmbom, B., & Hupa, M. (2010) · Fuel · doi:10.1016/j.fuel.2009.09.005 · Cited by 267
Hu, B., Yu, S.-H., Wang, K., Liu, L., & Xu, X.-W. (2008) · Dalton Transactions · doi:10.1039/b804644c · Cited by 228
Physicochemical characterisation of torrefied biomass
Ibrahim, R. H. H., Darvell, L. I., Jones, J. M., & Williams, A. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.10.004 · Cited by 224
Kumar, S., Kothari, U., Kong, L., Lee, Y. Y., & Gupta, R. B. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.11.023 · Cited by 183
Saddawi, A., Jones, J. M., Williams, A., & Le Coeur, C. (2012) · Energy & Fuels · doi:10.1021/ef2016649 · Cited by 172
Kumar, S., Gupta, R., Lee, Y. Y., & Gupta, R. B. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.09.035 · Cited by 168
Study of commercial wood charcoals for the preparation of carbon adsorbents
Pastor-Villegas, J., Pastor-Valle, J. F., Meneses, J.-M., & García, M. G. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2005.08.002 · Cited by 99
Influence of cation on the pyrolysis and oxidation of alginates
Ross, A. B., Hall, C. A., Anastasakis, K., Westwood, A., Jones, J. M., & Crewe, R. J. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.03.012 · Cited by 77
Self-citationLiquefaction of wood in hot compressed water
Mosteiro-Romero, M., Vogel, F., & Wokaun, A. J. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2013.12.038 · Cited by 40
Chen, J., Chen, Z., Wang, C., & Li, X. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.10.017 · Cited by 31
Cited by
Minireview of potential applications of hydrochar derived from hydrothermal carbonization of biomass
Fang, J., Zhan, L., Ok, Y. S., & Gao, B. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.08.026 · Cited by 600
Nicolae, S. A., Au, H., Modugno, P., Luo, H., Szego, A. E., Qiao, M., Li, L., Yin, W., Heeres, H. J., Berge, N., et al. (2020) · Green Chemistry · doi:10.1039/d0gc00998a · Cited by 311
Zhuang, X., Zhan, H., Song, Y., He, C., Huang, Y., Yin, X., & Wu, C. (2019) · Fuel · doi:10.1016/j.fuel.2018.09.019 · Cited by 298
Tang, Z.-E., Lim, S., Pang, Y.-L., Ong, H.-C., & Lee, K.-T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.056 · Cited by 297
Sustainable management and recycling of food waste anaerobic digestate: A review
Dutta, S., He, M., Xiong, X., & Tsang, D. C. W. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125915 · Cited by 291
Metadata
- Authors
- Smith, A. M., Singh, S., & Ross, A. B.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2016-04
- Volume
- 169
- Pages
- 135-145
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2211346451
- Cited by
- 359
- References
- 29
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.