An assessment of pinecone gasification in subcritical, near-critical and supercritical water
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Abstract Pinecone is a lignocellulosic forest residue with value-added industrial importance in terms of energy and materials production. Although promising, pinecone has received inadequate attention as a biofuel feedstock for thermochemical conversion. Water above its critical temperature (T C ≥ 374 °C) and critical pressure (P C ≥ 22.1 MPa), termed as supercritical water, has high kinetic energy and densities similar to that of gases and liquids, respectively. When employed in gasification, supercritical water has an ability to completely dissolve organics and gases. Therefore, this study identifies the candidacy of pinecone as a precursor for conversion to hydrogen through hydrothermal gasification. Pinecone was gasified in subcritical water (300 and 350 °C; 21 MPa), near-critical water (370 °C; 22 MPa) and supercritical water (450 and 550 °C; 23 MPa) to investigate the impacts of temperature (300–550 °C), feed concentration (10–25 wt%) and residence time (15–60 min). The impacts of alkali catalysts (e.g., Na 2 CO 3 , NaOH and KOH) at a loading of 30 wt% were examined to maximize hydrogen yields. The hydrochar generated from gasification in subcritical water, near-critical water and supercritical water were physico-chemically characterized through proximate and ultimate analysis (carbon-hydrogen-nitrogen-sulfur-oxygen), thermogravimetric analysis, X-ray diffraction, Fourier transform infra-red spectroscopy, Raman spectroscopy, Scanning electron microscopy and Nuclear magnetic resonance spectroscopy. In the non-catalytic gasification of pinecone, highest hydrogen (1.42 mmol/g) and total gas yields (6.6 mmol/g) with lower heating value (488 kJ/Nm 3 ) of the gas products were obtained in supercritical water at 550 °C with 10 wt% feed concentration for 60 min. Moreover, at 30 wt% catalyst loading, highest hydrogen yield was obtained from KOH (3.26 mmol/g) followed by NaOH (2.71 mmol/g) and Na 2 CO 3 (1.96 mmol/g). Hydrochars generated in supercritical water at 550 °C had a greater content of aromatic carbon and were thermally stable. The findings reveal, for the first time, the potential of pinecone for hydrogen production through subcritical, near-critical and supercritical water gasification, as well as the prospective of its hydrochar for environmental and material applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., & Ro, K. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.084 · Cited by 1,502
The contribution of biomass in the future global energy supply: a review of 17 studies
Berndes, G., Hoogwijk, M., & van den Broek, R. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00185-x · Cited by 1,149
Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T. G., & Labbé, N. (2011) · Energy & Fuels · doi:10.1021/ef200915s · Cited by 293
Chemical Reactions of C1 Compounds in Near-Critical and Supercritical Water
Watanabe, M., Sato, T., Inomata, H., Smith, R. L., Arai, K., Kruse, A., & Dinjus, E. (2004) · Chemical Reviews · doi:10.1021/cr020415y · Cited by 282
Cited by
Chemistry and Specialty Industrial Applications of Lignocellulosic Biomass
Okolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01123-0 · Cited by 415
Self-citationA technical review of bioenergy and resource recovery from municipal solid waste
Nanda, S., & Berruti, F. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123970 · Cited by 392
Self-citationThermochemical conversion of plastic waste to fuels: A review
Nanda, S., & Berruti, F. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01094-7 · Cited by 383
Self-citationSarker, T. R., Pattnaik, F., Nanda, S., Dalai, A. K., Meda, V., & Naik, S. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131372 · Cited by 365
Self-citationOkolie, J. A., Rana, R., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00565f · Cited by 321
Self-citationOkolie, J. A., Nanda, S., Dalai, A. K., Berruti, F., & Kozinski, J. A. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109546 · Cited by 297
Self-citationBiohydrogen Production Through Dark Fermentation
Sarangi, P. K., & Nanda, S. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.201900452 · Cited by 295
Self-citationNext-generation biofuels and platform biochemicals from lignocellulosic biomass
Okolie, J. A., Mukherjee, A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · International Journal of Energy Research · doi:10.1002/er.6697 · Cited by 184
Self-citationLin, J., Liao, Q., Hu, Y., Ma, R., Cui, C., Sun, S., & Liu, X. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123678 · Cited by 50
Masoumi, S., Borugadda, V. B., & Dalai, A. K. (2020) · Biorefinery of Alternative Resources: Targeting Green Fuels and Platform Chemicals · doi:10.1007/978-981-15-1804-1_11 · Cited by 10
Self-citation
Metadata
- Authors
- Nanda, S., Gong, M., Hunter, H. N., Dalai, A. K., Gökalp, I., & Kozinski, J. A.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 168
- Pages
- 84-96
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2764232303
- Cited by
- 119
- References
- 4
- FWCI
- 5.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.