Supercritical fluid extraction of oils from apple seeds: Process optimization, chemical characterization and comparison with a conventional solvent extraction
Open accessThe DOI matches its Crossref record.
Abstract
Abstract Oils from apple seeds were extracted with the application of supercritical fluid (SFE) and Soxhlet techniques. The effect of SFE experimental variables such as pressure (10–30 MPa), temperature (40–60 °C) and carbon dioxide flow rate (1–8 L/h) on the yield, antioxidant activity and total phenolic content was investigated using a central composite design. The experimental data were fitted with a second-order polynomial equation using regression analysis. The maximum yield, obtained at the optimum processing conditions (24 MPa, 40 °C, 1 L/h of carbon dioxide flow rate, 140 min) was 20.5 ± 1.5% (w/w). For comparison, the yield from Soxhlet extraction was 22.5 ± 2.5% (w/w). Both techniques produced an oil with a fatty acids profile rich in linoleic acid. However, the extract from SFE was higher in linoleic acid (63.76 ± 4.96 g/100 goil) than that achieved by Soxhlet (49.03 ± 3.85 g/100 goil). Despite the higher unsaturated fatty acids content, SFE extracts reported a higher oxidative stability (21.4 ± 1.2 h) compared to that one extracted by Soxhlet (12.1 ± 1.1 h). This result was expport addressing the extraction of apple seed oil by supercritical fluid at pressures lower tha The most abundant phenolic compound found in the extract was phloridzin (2.96 ± 0.046 μg/gseed in SFE oil and 1.56 ± 0.026 μg/gseed in Soxhlet). Instead, amygdalin, one of the antinutrients present in seeds, was not detected in the SFE oil. Industrial relevance The present study provided results addressing the extraction of apple seed oil by supercritical fluid at pressures lower than 30 MPa. The process allowed extracting an oil that was rich in unsaturated fatty acids, oxidative stable thanks to the high antioxidant activity, and free from anti-nutritional compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bitwell, C., Indra, S. S., Luke, C., & Kakoma, M. K. (2023) · Scientific African · doi:10.1016/j.sciaf.2023.e01585 · Cited by 648
Conventional versus green extraction techniques — a comparative perspective
Picot-Allain, C., Mahomoodally, M. F., Ak, G., & Zengin, G. (2021) · Current Opinion in Food Science · doi:10.1016/j.cofs.2021.02.009 · Cited by 456
Non-thermal Technologies for Food Processing
Jadhav, H. B., Annapure, U. S., & Deshmukh, R. R. (2021) · Frontiers in Nutrition · doi:10.3389/fnut.2021.657090 · Cited by 373
Techniques and modeling of polyphenol extraction from food: A review
Sridhar, A., Ponnuchamy, M., Kumar, P. S., Kapoor, A., Vo, D.-V. N., & Prabhakar, S. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01217-8 · Cited by 348
Supercritical fluid extraction of seed oils – A short review of current trends
Ahangari, H., King, J. W., Ehsani, A., & Yousefi, M. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.066 · Cited by 264
Review on the Extraction of Bioactive Compounds and Characterization of Fruit Industry By-Products
Patra, A., Abdullah, S., & Pradhan, R. C. (2022) · Bioresources and Bioprocessing · doi:10.1186/s40643-022-00498-3 · Cited by 213
“5%, where at 4 h of soxhlet extraction the yield of oil was 22% but the difference between both oil was the percentage of unsaturated fatty acid present in it (Ferrentino et al. 2020).”
BackgroundChong, J. W. R., Khoo, K. S., Yew, G. Y., Leong, W. H., Lim, J. W., Lam, M. K., Ho, Y.-C., Ng, H. S., Munawaroh, H. S. H., & Show, P. L. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125947 · Cited by 163
Metadata
- Authors
- Ferrentino, G., Giampiccolo, S., Morozova, K., Haman, N., Spilimbergo, S., & Scampicchio, M.
- Venue
- Innovative Food Science & Emerging Technologies
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 64
- Pages
- 102428
- ISSN
- 1466-8564 (ISSN-L)
- OpenAlex
- W3037135991
- Cited by
- 103
- References
- 0
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.