The DOI matches its Crossref record; 724 of the 732 references it cites were found in a registry or an index.
Poly (lactic acid) blends: Processing, properties and applications
Abstract
Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“Compared with PBAT, PLA exhibits attractive mechanical and physical properties such as high tensile strength and modulus [4].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“However, PLA suffers from its brittleness and low toughness at ambient conditions [4], due to its molecular structure with a relatively rigid backbone and small methyl side groups.”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“It has also been described that different compatibilizers also influence the mechanical properties of the PLA/PHB blend [181].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [181]
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Polymer Interface and Adhesion
Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,391
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Research works printed but not linked: 7
- Loomis, 1990, Polylactide stereocomplexes, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 31, 55
- Park, 1999, Biodegradable polymer blends of poly (lactid acid) and starch, Korea Polym. J., 7, 93
- Leadprathom, 2010, Compatibilized polylactic acid/thermoplastic starch by reactive blend, J. Met. Mater. Miner., 20, 87
- Armentano, 2015, Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems, Express Polym Lett, 9, 583, 10.3144/expresspolymlett.2015.55 · DOI
- Gonzalez-Ausejo, 2017, Assessing the thermoformability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (acid lactic) blends compatibilized with diisocyanates, Polym. Test., 62, 235, 10.1016/j.polymertesting.2017.06.026 · DOI
- Riley, 2003, Washington C, Langmuir, 19
- Seck, 2010, Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins, J. Control. Release, 148, 34, 10.1016/j.jconrel.2010.07.111 · DOI
Cited by
Sorted by citations
Items 301–400 of 777
Toughening polylactide with nonlinear, degradable analogues of PEG and its copolymers
Li, H., Yan, Y., jiang, X., Lin, J., & Li, M. (2022) · Polymer Chemistry · doi:10.1039/d2py01307j · Cited by 15
Xia, M., Shen, Z., Xiao, S., Gu, M., & Zhang, Y. (2023) · Catalysis Science & Technology · doi:10.1039/d3cy00471f · Cited by 16
Yu, J., Zhao, T., Li, C., Pan, H., Tan, Z., Yang, H., & Zhang, H. (2023) · Colloid & Polymer Science · doi:10.1007/s00396-023-05169-z · Cited by 16
Crystallinity-Independent Toughness in Renewable Poly( l -lactide) Triblock Plastics
Krajovic, D. M., Haugstad, G. D., & Hillmyer, M. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02580 · Cited by 16
Yu, K., Hou, J., Tian, D., Zhang, X., & Chen, J. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c03229 · Cited by 16
Dewi, R., Sylvia, N., Zulnazri, Z., Fithra, H., Riza, M., Siregar, J. P., Cionita, T., Fitriyana, D. F., & Anis, S. (2024) · Polymers · doi:10.3390/polym16162384 · Cited by 16
Bagheri, E., Mosaddegh, P., & Behzad, T. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49134 · Cited by 16
A green COPD flame retardant for improving poly(l-lactic acid)
Shen, Y., Sun, Q., Liu, L., Xu, H., Wei, J., Chen, X., Song, X., & Zhang, B. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109809 · Cited by 16
Li, X., Yu, H., Ding, J., Shen, L., & Zhao, X. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.131829 · Cited by 16
A medicated shape memory composite of grafting tannin/poly(l-lactide)
Wei, J., Qu, R., Wang, Y., Liu, L., Yang, J., Xu, H., Hu, X., & Song, X. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.04.074 · Cited by 16
An Overview of Biopolymers in Food Packaging Systems
Fonseca, J. D. M., Koop, B. L., Trevisol, T. C., Capello, C., Monteiro, A. R., & Valencia, G. A. (2021) · doi:10.1002/9783527827718.ch2 · Cited by 16
3D-printed constructs deliver bioactive cargos to expedite cartilage regeneration
Jiao, R., Lin, X., Wang, J., Zhu, C., Hu, J., Gao, H., & Zhang, K. (2023) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2023.12.015 · Cited by 18
Li, G., Yang, T., Liu, Y., Su, H., Liu, W., Fang, D., Jin, L., Jin, F., Xu, T., & Duan, C. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.116 · Cited by 15
Implementation of Biodegradable Liquid Marbles as a Novel Controlled Release Fertilizer
McQuillan, R. V., Stevens, G. W., & Mumford, K. A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c04605 · Cited by 15
Effect of curing time on the mechanical properties of poly(glycerol sebacate)
Wu, Z., Jin, K., Wang, L., & Fan, Y. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53700 · Cited by 15
Wu, H., Wu, H., Liu, Y., Hu, J., Zhang, N., Wu, X. B., Sun, Z., Wei, G., Chen, Y., Duan, Y., et al. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110064 · Cited by 15
Properties of PLA-co-PBSu Copolymers Rapidly Synthesized by Reactive Processing
Terzopoulou, Z. N., Zamboulis, A., Bikiaris, N. D., Margellou, A. G., Valera, M. Á., Mangas, A., Koltsakidis, S., Tsongas, K., Tzetzis, D., & Triantafyllidis, K. S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02981-0 · Cited by 15
Patti, A., Acierno, S., Cicala, G., & Acierno, D. (2023) · European Journal of Wood and Wood Products · doi:10.1007/s00107-023-01994-9 · Cited by 15
Ni, H., Li, H., Hou, W., Chen, J., Miao, S., Wang, Y., & Li, H. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122038 · Cited by 15
Hasan, M. R., Davies, I. J., Paramanik, A., John, M. B., & Biswas, W. K. (2024) · Processes · doi:10.3390/pr12040760 · Cited by 16
Du, X., Yuan, X., Lin, S., Tan, X., & Han, Y. (2024) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2024.113969 · Cited by 15
Shahroodi, Z., Momeni, V., Moshkriz, A., Rajabifar, N., & Darvishi, R. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400209 · Cited by 15
Impact-Resistant PLLA/PBAT Composites Based on Novel Biobased Reactive Microcross-Linked PBAT
Xu, Y., Meng, X., You, X., Jiang, W., Du, P., Jiao, L., Li, C., Bao, B., & Xin, Z. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04307 · Cited by 15
Native and Recombinant Yeast Producers of Lactic Acid: Characteristics and Perspectives
Царук, А. В., Filip, K., Sibirny, A. А., & Ruchała, J. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26052007 · Cited by 15
Raj, A., Samuel, C., Nagalakshmaiah, M., & Prashantha, K. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25426 · Cited by 15
Crystallization behavior of poly(lactic acid) and its blends
Wang, Y., Liu, C., & Shen, C. (2020) · Polymer Crystallization · doi:10.1002/pcr2.10171 · Cited by 15
In Vivo Cartilage Regeneration with Cell-Seeded Natural Biomaterial Scaffold Implants: 15-Year Study
Theodoridis, K., Μanthou, M. E., Aggelidou, E., & Kritis, A. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0295 · Cited by 15
de la Cruz‐Martínez, F., Buchaca, M. M. D. S., del Campo-Balguerías, A., Fernández‐Baeza, J., Sánchez‐Barba, L. F., Garcés, A., Alonso‐Moreno, C., Castro‐Osma, J. A., & Lara‐Sánchez, A. (2021) · Polymers · doi:10.3390/polym13101651 · Cited by 16
Fredi, G., Jafari, M. K., Dorigato, A., Bikiaris, D. Ν., & Pegoretti, A. (2022) · Materials · doi:10.3390/ma15041316 · Cited by 15
Jariyasakoolroj, P., & Chirachanchai, S. (2022) · Polymers · doi:10.3390/polym14040825 · Cited by 15
Li, S., Luo, C., Tang, F., Xiao, W., Fang, M., Sun, J., & Chen, W. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03012-7 · Cited by 15
Biofillers Improved Compression Modulus of Extruded PLA Foams
Mort, R., Peters, E., Curtzwiler, G. W., Jiang, S., & Vorst, K. (2022) · Sustainability · doi:10.3390/su14095521 · Cited by 15
Ye, H., Li, C., Zhang, Y., Yan, X., Wang, H., & Li, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02467 · Cited by 14
Zhong, Z., Hu, M., Yu, F., Yang, P., Li, L., Wang, J., & Wang, Y. (2025) · Environment & Health · doi:10.1021/envhealth.5c00035 · Cited by 14
Rahman, N. A., Ngaini, Z., Farooq, S., Ling, S. C. A., & Shahren, P. N. J. (2025) · Bioresources and Bioprocessing · doi:10.1186/s40643-025-00923-3 · Cited by 15
Ardabili, T. F., Kassaun, B. B., Roohollahi, H., & Kazemian, H. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115515 · Cited by 14
Su, X., Jia, S., Cao, L., & Yu, D. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51014 · Cited by 14
Wang, H., Chen, X., Ding, Y., Huang, D., Ma, Y., Pan, L., Zhang, K., & Wang, H. (2021) · Polymer · doi:10.1016/j.polymer.2021.123964 · Cited by 14
Chen, P., Chen, C., Mao, H., Dai, C., Su, C., Tsai, J.-C., & Lin, F. (2023) · Polymers · doi:10.3390/polym15234585 · Cited by 15
Effect of Particle Size on the Physical Properties of PLA/Potato Peel Composites
Miller, K., Reichert, C. L., Loeffler, M., & Schmid, M. (2024) · Compounds · doi:10.3390/compounds4010006 · Cited by 12
Al‐Saleh, M. H., & El-Methaly, H. M. (2024) · Synthetic Metals · doi:10.1016/j.synthmet.2024.117592 · Cited by 14
Koh, S., Furutate, S., Imai, Y., Kanda, T., Tanaka, S., Tominaga, Y., Sato, S. A., & Taguchi, S. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07662 · Cited by 14
Properties and Performance Relationship of Biopolymers in Textile Industry
Fazal‐ur‐Rehman, Zhara, H., Adeel, S., Özomay, Z., & Mia, R. (2024) · Springer eBooks · doi:10.1007/978-981-97-0684-6_4 · Cited by 14
Cai, H., Cheng, Y., Zhang, Z., Pan, L., Zhang, K., & Li, Y. (2024) · Giant · doi:10.1016/j.giant.2024.100274 · Cited by 14
Urtekin, G., & Aytaç, A. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02539-5 · Cited by 14
Nofar, M., Mohammadi, M., & Carreau, P. J. (2021) · Journal of Rheology · doi:10.1122/8.0000234 · Cited by 14
Self-citationPuekpoonpoal, N., Phattarateera, S., Kerddonfag, N., & Aht‐Ong, D. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.1930043 · Cited by 14
Utomo, E., Stewart, S. A., Picco, C. J., Domínguez‐Robles, J., & Larrañeta, E. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821749-8.00012-4 · Cited by 14
Ladelta, V., Ντέτσικας, Κ., Zapsas, G., & Hadjichristidis, N. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02294 · Cited by 14
Huang, W., Shi, Y., Wang, W., Sheng, Y., Guo, Y., Li, Y., Yang, Q. W., & Chen, P. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.5982 · Cited by 13
Ni’mah, H., Rochmadi, R., Woo, E. M., Widiasih, D. A., & Mayangsari, S. (2019) · International Journal of Technology · doi:10.14716/ijtech.v10i3.2936 · Cited by 14
Biosensing and Biotechnological Applications of Nanofillers: Current Status and Perspectives
Raghunathan, M., Kapoor, A., Kumar, P., Tripathi, S. C., Haque, S., & Pal, D. B. (2024) · Indian Journal of Microbiology · doi:10.1007/s12088-024-01326-2 · Cited by 13
Microbial Biopolymers: Pharmaceutical, Medical, and Biotechnological Applications
Godbole, R., Goutam, A., & Mali, A. V. (2021) · Springer eBooks · doi:10.1007/978-981-16-0045-6_18 · Cited by 13
Xie, Y., Cheng, G., Wu, Z., Shi, S., Zhao, J., Jiang, L., Jiang, D., Yuan, M., Wang, Y., & Yuan, M. (2022) · Nanomaterials · doi:10.3390/nano12071229 · Cited by 13
Li, C., Wang, B., Yang, Y., Chai, J., Guo, Z., Fang, Z., Chen, P., & Li, J. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.053 · Cited by 13
Chen, F., Chen, G., Huang, P., Zheng, M., Xiao, Y., Hu, H., Liang, Y., Liu, Y., & Dong, H. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108180 · Cited by 13
Hassan, M., Mohanty, A. K., & Misra, M. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c03150 · Cited by 13
Eraslan, K., Altınbay, A., & Nofar, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132936 · Cited by 14
Self-citationRheological Changes in Bio-Based Filaments Induced by Extrusion-Based 3D Printing Process
Patti, A., & Acierno, S. (2024) · Materials · doi:10.3390/ma17153839 · Cited by 13
Macrocycle-based oligo- and polylactides: synthesis and prospects of application
Stoikov, I. I., Леонидович, П. П., Mostovaya, O. A., Vavilova, A. A., Gorbatchuk, V. V., Shurpik, D. N., & Evtugin, G. A. (2019) · Russian Chemical Bulletin · doi:10.1007/s11172-019-2655-4 · Cited by 13
Electrical and Optical Properties of Silicon Oxide Lignin Polylactide (SiO2-L-PLA)
Fal, J., Bulanda, K., Traciak, J., Sobczak, J., Kuzioła, R., Grąz, K., Budzik, G., Oleksy, M., & Żyła, G. (2020) · Molecules · doi:10.3390/molecules25061354 · Cited by 13
Ng, W. K., Chow, W. S., & Ismail, H. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02081-x · Cited by 13
Ding, Y., Chen, X., Huang, D., Fan, B., Pan, L., Zhang, K., & Li, Y. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.03.139 · Cited by 13
Zuo, H., Liu, J., Huang, D., Bai, Y., Cui, L., Pan, L., Zhang, K., & Wang, H. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210175 · Cited by 13
Fazli, A., & Rodrigue, D. (2022) · Molecules · doi:10.3390/molecules27206819 · Cited by 15
Pervaporative desalination using MIL 140 A loaded polylactic acid nanocomposite membrane
Nigiz, F. U., & Karakoca, B. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.11.015 · Cited by 13
Zhao, J., He, H., & Zhu, Z. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c04359 · Cited by 13
Ozbay, C., & Gümüş, Ö. Y. (2023) · Journal of Elastomers & Plastics · doi:10.1177/00952443231166143 · Cited by 13
Oyama, I. M. C., dos Anjos, E. G. R., Morgado, G. F. D. M., Martins, E. F., & Passador, F. R. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54484 · Cited by 13
CRYSTALLIZATION AND THERMAL PROPERTIES
Fambri, L., & Migliaresi, C. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch8 · Cited by 15
Xiao, Z., Hou, X., Hwang, S., & Li, H. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53092 · Cited by 12
Preparation and morphology control of porous microspheres of different crystalline polymers
Wu, J., Zhi, T., Xing, L., Fan, Y., Xiong, C., Huang, D., & Xiong, Z. (2023) · New Journal of Chemistry · doi:10.1039/d3nj00549f · Cited by 12
Xing, J. W., Wang, R., Sun, S., Shen, Y., Liang, B., & Xu, Z. (2023) · Molecules · doi:10.3390/molecules28083627 · Cited by 12
Multi‐Functional Organofluoride Catalysts for Polyesters Production and Upcycling Degradation
Zhang, Q., Hu, C., Pang, X., & Chen, X. (2023) · ChemSusChem · doi:10.1002/cssc.202300907 · Cited by 12
Chang, W.-W., Niu, J., Peng, H. H., & Rong, W. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127230 · Cited by 12
Gigante, V., Aliotta, L., Pont, B. D., Titone, V., Botta, L., Mantia, F. P. L., & Lazzeri, A. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108294 · Cited by 13
Polylactide/poly(vinyl monomer) block copolymers for specific applications
Bednarek, M., & Grabowski, M. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2310105 · Cited by 13
Xu, F., Shang, J., Abdurexit, A., Jamal, R., Abdiryim, T., Li, Z., You, J., Wei, J., Su, E., & Huang, L. (2024) · Polymers · doi:10.3390/polym16121641 · Cited by 12
Sabalina, A., Gaidukovs, S., Aunins, A., Gromova, A., Gaidukova, G., Orlova, L., & Platnieks, O. (2024) · Polymers · doi:10.3390/polym16162288 · Cited by 12
Malek, N. S. A., Omar, H., Rosman, N., Hajar, N., Aizamddin, M. F., Bonnia, N. N., Khusaimi, Z. B., Mahmood, M. R., & Asli, N. A. (2024) · Packaging Technology and Science · doi:10.1002/pts.2864 · Cited by 12
Recent progress in biosourced polylactic acid-based biocomposites for dentistry: A review
Pan, C., Gao, Q., Chen, Y., Wang, Y., & Tang, Z. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143528 · Cited by 12
Yildiz, B. C., & Kayan, A. (2020) · Catalysis Surveys from Asia · doi:10.1007/s10563-020-09307-3 · Cited by 12
Xia, W., Wei, J., Zhang, Z., Shen, Y., Chen, X., Song, X., & Chen, J. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.128179 · Cited by 12
Rigotti, D., Fredi, G., Perin, D., Bikiaris, D. Ν., Pegoretti, A., & Dorigato, A. (2022) · Polymers · doi:10.3390/polym14030396 · Cited by 12
Liu, J., Wang, B., Liu, W., Hu, X., Zhang, C., Zhou, Z.-Y., Lang, J., Wu, G.-S., Zhang, Y., Yang, J.-K., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124987 · Cited by 10
Liu, S., He, S., Chen, C., Li, C., Luo, W., Zheng, K., Wang, J., Li, Z., He, H., Chen, Q., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300068 · Cited by 12
Srisuwan, Y., & Baimark, Y. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.106074 · Cited by 12
Hajibeygi, M., Faramarzinia, S., Shabanian, M., Norouzbahari, S., & Meier‐Haack, J. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126497 · Cited by 12
Al‐Saleh, M. H., & Al-Shboul, T. S. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057221128189 · Cited by 12
He, Y. W., Dong, K., Guo, Y.-D., Zhao, G., Tang, S., Wang, X., & Ma, B. (2023) · Polymer · doi:10.1016/j.polymer.2023.126441 · Cited by 12
A novel degradable PCL/PLLA strapping band for internal fixation of fracture
Jin, B., Zhang, C., Zhong, Z., Liu, Z., Zhang, Z., Li, D., Zhu, M., & Yu, B. (2023) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-023-06759-7 · Cited by 11
Biodegradable flexible foam: Novel material based on cassava TPS obtained by extrusion
Bolaños, P. A., Ayala-Aponte, A. A., Castillo, H. S. V., Rodrı́guez-Herrera, R., Avalos-Belmontes, F., & Solanilla‐Duque, J. F. (2023) · Colloid & Polymer Science · doi:10.1007/s00396-023-05204-z · Cited by 11
Chen, Y., Song, X., Wang, Y., Huang, Y., Wang, Y., & Zhu, C. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128788 · Cited by 11
Sessini, V., Salaris, V., Oliver-Cuenca, V., Tercjak, A., Fiori, S., López, D., Kenny, J. M., & Peponi, L. (2024) · Polymers · doi:10.3390/polym16081107 · Cited by 11
Qiang, T., Qi, X., Gao, H., Qiang, H., Wang, S., Hu, L., & Hu, N. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05303-z · Cited by 11
Tuning the Structure–Property Relationships in Binary and Ternary Blends of PLA/PBAT/PHBH
Nofar, M., Salehiyan, R., & Barletta, M. (2024) · Polymers · doi:10.3390/polym16121699 · Cited by 11
Self-citationGigante, V., Gallone, G., Aliotta, L., & Lazzeri, A. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100953 · Cited by 12
Coote, J. P., Larson, M. C., Bates, F. S., & Ellison, C. J. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00678 · Cited by 11
Lu, J., Su, J., & Han, J. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01313 · Cited by 11
Development of a PLA/PHA-TiO₂ Polymer Blend with Improved Physicochemical and Thermal Properties
Qader, I., Kök, M., Mohammed, K. S., Coşkun, M., Öner, E., & Aydoğdu, Y. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03547-y · Cited by 12
Metadata
- Authors
- Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C.
- Affiliations
- Istanbul Technical University (TR)
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Nofar, Mohammadreza
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 125
- Pages
- 307-360
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2904736796
- Cited by
- 780
- References
- 732
- Citations by year
- 2026: 69 · 2025: 94 · 2024: 123 · 2023: 149 · 2022: 95 · 2021: 120 · 2020: 98 · 2019: 32
- FWCI
- 4.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Biological Macromolecules (publishedVersion)
- PubMed (publishedVersion)
- Istanbul Technical University Academic Open Archive (Istanbul Technical University) (submittedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, PLA blends, biodegradable polymers, poly(L-lactic acid), poly(D-lactide), stereocomplex crystals, immiscible polymer blends, miscible polymer blends, ternary mixtures, polymer nanocomposites, polymer processing, crystallization, morphology-property relationship, biomedical applications, petroleum substitute
- MeSH terms
- Biocompatible Materials, Biopolymers, Crystallization, Polyesters, Stereoisomerism, Nanocomposites, Mechanical Phenomena, Chemical Phenomena, Polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
