The DOI matches its Crossref record; 724 of the 732 references it cites were found in a registry or an index.
Poly (lactic acid) blends: Processing, properties and applications
Abstract
Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“Compared with PBAT, PLA exhibits attractive mechanical and physical properties such as high tensile strength and modulus [4].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“However, PLA suffers from its brittleness and low toughness at ambient conditions [4], due to its molecular structure with a relatively rigid backbone and small methyl side groups.”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“It has also been described that different compatibilizers also influence the mechanical properties of the PLA/PHB blend [181].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [181]
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Polymer Interface and Adhesion
Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,391
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Research works printed but not linked: 7
- Loomis, 1990, Polylactide stereocomplexes, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 31, 55
- Park, 1999, Biodegradable polymer blends of poly (lactid acid) and starch, Korea Polym. J., 7, 93
- Leadprathom, 2010, Compatibilized polylactic acid/thermoplastic starch by reactive blend, J. Met. Mater. Miner., 20, 87
- Armentano, 2015, Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems, Express Polym Lett, 9, 583, 10.3144/expresspolymlett.2015.55 · DOI
- Gonzalez-Ausejo, 2017, Assessing the thermoformability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (acid lactic) blends compatibilized with diisocyanates, Polym. Test., 62, 235, 10.1016/j.polymertesting.2017.06.026 · DOI
- Riley, 2003, Washington C, Langmuir, 19
- Seck, 2010, Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins, J. Control. Release, 148, 34, 10.1016/j.jconrel.2010.07.111 · DOI
Cited by
Sorted by citations
Items 601–700 of 777
Luo, H., Yang, X., Ding, Q., Sheng, B., Deng, J., Yan, X., Wu, Y., Chen, H., Hao, C., Yuan, S., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136550 · Cited by 2
Effect of Polylactic Acid (PLA) as Reinforcement for Jackfruit Seed Starch-Based Degradable Plastic
Dewi, R., Sylvia, N., & Riza, M. (2025) · Mechanical Engineering, Science and Technology International Conference (MEST) · doi:10.3390/engproc2025084014 · Cited by 2
Iglesias-Montes, M. L., Malbos, L. B., Hankovits, M. I., Giacomini, A., D’Amico, D. A., Seoane, I. T., Manfredi, L. B., & Cyras, V. P. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05759-7 · Cited by 2
Elen, N. Ç., Çiçek, B., Elen, L., Moran, B., Yıldırım, M., & Kanbur, Y. (2025) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119251351717 · Cited by 2
Parida, S., Ashok, N., & Kurapati, R. (2025) · Materials Advances · doi:10.1039/d5ma00690b · Cited by 2
Bayat, P., Anstey, A., Dubé, M. A., Morse, T., Cunningham, M. F., & Meek, K. M. (2025) · Composites Part C Open Access · doi:10.1016/j.jcomc.2025.100673 · Cited by 2
Tuna, S., & Akkoyun, M. (2025) · Cellular Polymers · doi:10.1177/02624893261416640 · Cited by 2
Zhang, Y., Dong, C., Wang, Y. D., Yuan, M., Niu, H., Li, Q., Chunguang, S., Wang, Z., & Liu, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.129624 · Cited by 2
Ломакин, С. М., Koverzanova, E. V., Usachev, S. V., Шилкина, Н. Г., Khvatov, A. V., Erina, N. A., Rogovina, S. Z., Кузнецова, О. Н., Siracusa, V., Berlin, A. A., et al. (2026) · Polymers · doi:10.3390/polym18030347 · Cited by 2
Preparation of curcumin-loaded microparticles from star-shaped poly(lactic acid) stereo-complex
Kawamura, A., Ishihara, T., Terasaki, M., Sago, T., Tsukamoto, T., & Shibasaki, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.129695 · Cited by 2
Yan, C., Li, P., Hou, D., Jiang, L., Luo, F., Meng, H., Zhang, K., Yin, B., Yang, W., & Yang, M. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c00126 · Cited by 2
Functional polylactic acid composites reinforced with natural materials
Priya, S. M., Nevaditha, N. T., & Mon, S. G. (2026) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844261438325 · Cited by 2
Amrutha, N., Siddappa, K. M. P., & Reddy, J. P. (2026) · Journal of Polymer Science · doi:10.1002/pola.70117 · Cited by 2
Wang, L., Zhang, P., Lu, J., Su, J., & Han, J. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.112106 · Cited by 2
Enhancing the compatibility and compost-aging behaviour of PLA/PHBV blends through functionalization
Belyamani, I., Alkhlaifi, F. F., Najemi, L., Azam, M. U., Askar, K. A., & O'Connor, M. J. (2026) · Polymer · doi:10.1016/j.polymer.2026.130267 · Cited by 2
Effect of Melt Jet Spinning Process on PLA/PBS Blend Nonwoven Fabric Production
Boonyod, S., Pivsa‐Art, W., & Pivsa‐Art, S. (2023) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/p-8q9pkx · Cited by 2
Ashkenazi, S., Matsanov, P., Nassar‐Marjiya, E., Farah, S., & Weitz, I. S. (2024) · ACS Omega · doi:10.1021/acsomega.3c10447 · Cited by 2
Cheng, H., Yu, M., Zhang, Y., Shi, H., Yu, Y., Wang, L., & Han, C.-S. (2024) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13245-x · Cited by 2
Zhang, X., Li, H., Li, R., Kan, C., Dong, X., Xing, Q., & Wang, Z. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2365280 · Cited by 2
Lazzarini, G., Silva, G. L. D., Lacerda, L. S., Toledo, A. L. M. M., & Barradas, T. N. (2025) · Pharmaceutical Development and Technology · doi:10.1080/10837450.2025.2462945 · Cited by 2
Wang, K., Li, A.-Y., Sun, X., Zhu, J., & Huang, R. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04404-1 · Cited by 2
Enhancing the biomechanical response of 3D-printed polylactic acid scaffolds with heat treatment
Maheshwari, S., Singh, A. K., Chatterjee, K., Alam, Z., & Singh, S. S. (2025) · Emergent Materials · doi:10.1007/s42247-025-01155-z · Cited by 2
Ray, R. K., Antharjanam, P. K. S., & Chakraborty, D. (2025) · Faraday Discussions · doi:10.1039/d5fd00048c · Cited by 2
Poly(Lactic Acid) Blends in Biomedical Applications
Bennie, R. B., Joel, C., Abraham, S. D., & Antony, A. J. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_2 · Cited by 1
Benbelaid, F., Bouakaz, B. S., Kervoëlen, A., Balcon, B., Arabeche, K., Ausias, G., & Habi, A. (2025) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-025-03923-0 · Cited by 2
Buğdaycı, M., Tuna, Ö., & Yigit, N. C. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2552477 · Cited by 2
P’yanova, L. G., Корниенко, Н. В., Ogurtsova, D. N., & Лавренов, А. В. (2020) · AIP conference proceedings · doi:10.1063/5.0033018 · Cited by 2
The CNC dispersion quality in various PLA grades
Vatansever, E., Arslan, D., Sarul, D. S., & Nofar, M. (2023) · AIP conference proceedings · doi:10.1063/5.0135790 · Cited by 2
Self-citationZaniolo, K. M., Biaggio, S. R., Cirelli, J. A., Cominotte, M. A., Bocchi, N., Rocha‐Filho, R. C., & de Souza, C. (2023) · Journal of the Brazilian Chemical Society · doi:10.21577/0103-5053.20230134 · Cited by 2
Jaouadi, N., Jaziri, M., Maazouz, A., & Lamnawar, K. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316737 · Cited by 2
A Temperature-Transferable Coarse-Grained Model for Poly(lactic Acid) Melts
Prasitnok, O., & Prasitnok, K. (2024) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.4c03534 · Cited by 2
Synthesis and Characterization of Poly (lactic acid-b- ε-caprolactone) Block Copolymers
ÖZTÜRK, S., Čakmak, İ., TEKEŞ, A. T., & Yıldıko, Ü. (2019) · Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.21597/jist.543626 · Cited by 2
Fabrication of PLA-HAp-CS Based Feed-Stock Filament by Twin-Screw Extrusion Using Matrix Co-Relation
Ranjan, N., Kumar, R., Singh, R., & Ahuja, I. S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00181-4 · Cited by 2
Lactide Synthesis Using ZnO Aqueous Nanoparticles as Catalysts
Duarte, S., Dullak, A., Ferreira, F. P., Oddone, M., & Riveros, D. (2023) · doi:10.3390/blsf2023028013 · Cited by 1
Palak, H., & Karaguzel, B. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00054-5 · Cited by 1
Material-process-structure-property Relationships in Stereocomplex-Reinforced Poly(lactide)
Tuccitto, A. V., & Lee, P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00056-9 · Cited by 1
Endowing molecular motions in the solid materials
Guo, J., Huang, J., & Yan, Y. (2024) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2024.101861 · Cited by 1
Shafi, A. R., Abdan, K., Fazil, N. D. A., Salit, M. S., & Ali, M. R. (2024) · Pertanika journal of science & technology · doi:10.47836/pjst.32.s5.02 · Cited by 1
Liu, J. Z., Qiu, Y., Wang, X., Bai, X., Song, Y., Yang, B., Yu, L., Huang, J., Leng, S., Gao, J., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143400 · Cited by 1
Rakea, A. M., Tirkeş, S., Yıldız, Ü. H., Tirkeş, S., & Tayfun, Ü. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70206 · Cited by 1
Luo, C., Xue, Y., Liu, S., Zhou, L., Fang, S., & Yang, H.-R. (2025) · Materials Letters · doi:10.1016/j.matlet.2025.139081 · Cited by 1
Wu, L., Jia, S., Zhu, Y., Yan, Z., Wang, S., Wang, W., Zhang, Y., Xu, F., & Liu, W. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.148152 · Cited by 2
Luo, Z., Ouyang, X., Tian, G., Chen, S., Wu, G., & Wang, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01700 · Cited by 1
Effect of Surface Treatment of Nano-Magnetite Particles on PLA/PBAT Composites
Zhang, L., Wang, W., Li, K., Chen, J., Xu, Y., Zhao, Z., Li, Y., & Yu, L. F. (2025) · Journal of Composites Science · doi:10.3390/jcs9110592 · Cited by 1
Thermal stability of UV irradiation crosslinked polylactic acid fibers and fabrics
Dong, K., Zhang, J., Wu, L., Zhao, M., Ma, B., & He, Y. W. (2025) · Textile Research Journal · doi:10.1177/00405175251385543 · Cited by 1
Sartillo-Bernal, W., Ledezma-Serguei, A., Rodríguez-Hernández, J., Méndez‐Montealvo, G., Velázquez, G., & Fonseca‐Florido, H. A. (2025) · Polymer · doi:10.1016/j.polymer.2025.129215 · Cited by 1
Alemi, M. H., & Jalali‐Arani, A. (2025) · SPE Polymers · doi:10.1002/pls2.70027 · Cited by 1
Casares-López, J. M., Hierro‐Oliva, M., González-Martín, M. L., & Gallardo-Moreno, A. M. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.165469 · Cited by 1
Jamornsuriya, S., Takagi, H., & Sakurai, S. (2025) · Polymer · doi:10.1016/j.polymer.2025.129142 · Cited by 2
Duan, J., Zhang, Y., Hu, Z., Lu, H., & Bao, J. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70345 · Cited by 1
Dhal, M. K., Singh, A., Banerjee, A., Madhu, K., Shukla, P., Kumar, A., & Katiyar, V. (2026) · Journal of Polymer Research · doi:10.1007/s10965-025-04722-4 · Cited by 1
Enzymatic routes to initiator-based functional biodegradable polyesters
Zhang, Y., Cai, Y., Liu, Y., Xi, L., Hu, X., Guo, K., & Zhu, N. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174130 · Cited by 1
Fan, Y., Zhao, X., Ma, H., Meng, R., Zhou, H., Wang, X., & Wang, L. (2026) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2026.106702 · Cited by 1
Guo, W., Liu, X., Liu, Y., Zhu, J., He, L., Tang, Y., Cheng, Y. Y., Li, X., Li, L., Hongfei, W., et al. (2026) · Tissue and Cell · doi:10.1016/j.tice.2026.103404 · Cited by 1
Development of Biobased and Biodegradable Plastics
Adrah, K., Ananey-Obiri, D., Awuku, R. B., Adedeji, R., & Tahergorabi, R. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_149-2 · Cited by 1
Li, T., Sun, H., Yi, X., Du, J., Bai, Q., Song, W., Sun, D., & Chang, X. (2026) · Polymer · doi:10.1016/j.polymer.2026.130056 · Cited by 1
Krajovic, D. M., Chayet, B. D., & Hillmyer, M. A. (2026) · ACS Central Science · doi:10.1021/acscentsci.6c00278 · Cited by 1
Polymer foaming: mechanisms, technologies and emerging applications – a review
Jeziórska, R., Spasówka, E., Borkowski, M., & Szadkowska, A. (2026) · Polimery · doi:10.14314/polimery.2026.5.2 · Cited by 1
Phase Organization and Circularity in PLLA/Vitrimer Semi-interpenetrating Polymer Networks
Gamberini, L., Giudice, A. D., Papadopoulos, L., Righetti, M. C., Hakkarainen, M., Galantini, L., Liguori, A., & Focarete, M. L. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00678 · Cited by 1
Zhou, Q., Ye, S., Ren, Y., Jing, M., & Wang, Y. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-13367-7 · Cited by 1
Features of obtaining and properties of binary blends of polylactides. Review
Маsyuk, A. S., Kysil, K. V., Skorokhoda, V. Y., Katruk, D. S., Kulish, B. I., & Levytskiy, V. Y. (2020) · Chemistry Technology and Application of Substances · doi:10.23939/ctas2020.02.146 · Cited by 1
Impact of Zn(II) ions on crystallization and thermal properties of Poly(lactic acid)
Wang, Z., & Liu, H. (2020) · Chinese Journal of Chemical Physics · doi:10.1063/1674-0068/cjcp2006080 · Cited by 1
PLA binary blends with elastomeric polymers
Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00007-8 · Cited by 1
Self-citationPreparation and Characterization of 2,3-Dialdehyde Cellulose/Polylactic Acid Biodegradable Blends
Şirin, K., SEZİŞ, Ü. G., & Ay, E. (2021) · El-Cezeri Fen ve Mühendislik Dergisi · doi:10.31202/ecjse.899815 · Cited by 1
Состав полимерной матрицы биоразлагамой упаковки
университет, Б. Г. Т., Васильевна, Р. М., Ratkevich, M. V., М», О. «., Петрушеня, А. Ф., университет, Б. Г. Т., Гребенчикова, И. А., университет, Б. Г. Т., Рагатка, Д. А., & «Гринэйр», З. (2022) · Труды БГТУ Серия 2 · doi:10.52065/2520-2669-2022-259-2-195-209 · Cited by 1
Cayabyab, S. R., Gelilang, S. T., Villanueva, N., Laga, J. L., Milo, L. C., Paglicawan, M. A., Celorico, J. R., & Basilia, B. A. (2023) · Diffusion Foundations and Materials Applications · doi:10.4028/p-8k4r2q · Cited by 1
Sritapunya, T., Rattanapan, A., Sapsrithong, P., Tuampoemsab, S., Suksompoom, P., Lagjaroensakul, C., & Dechsiri, P. (2023) · Materials science forum · doi:10.4028/p-e2rch8 · Cited by 1
A Double-Emulsion Method for the Fabrication of PLA Single-Hole Hollow Particles
Li, Y., Zhang, L., Tian, R., Pranantyo, D., Chen, L., & Xia, F. (2023) · Current Chinese Science · doi:10.2174/2210298103666230428092735 · Cited by 2
Enhanced properties of PBAT by incorporating CNC
Vatansever, E., Arslan, D., Sarul, D. S., Durmuş, A., & Nofar, M. (2023) · AIP conference proceedings · doi:10.1063/5.0135788 · Cited by 1
Self-citationFabrication and Characterization of PLA Composite Filament for Medical Applications
Singh, J., Francis, V., & Kumar, N. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-6601-1_12 · Cited by 1
Perspectives on stimuli-sensitive polyester nanocomposite
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00014-2 · Cited by 1
Shih Pang, T. S. A. I., Wu, W., Sota, H., HIROGAKI, T., & Aoyama, E. (2024) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/p-fap6yj · Cited by 1
Innovation in Polymer Science—What to Expect from Green Chemistry
Domenek, S. (2024) · Springer eBooks · doi:10.1007/978-3-031-54188-9_9 · Cited by 1
Rahaman, M. H., Islam, M. A., Islam, M. M., Khan, G. M. A., Gafur, M. A., Alam, S. M. N., & Rahman, M. A. (2024) · Nano Select · doi:10.1002/nano.202400150 · Cited by 1
Li, J., Zhang, J., Xu, L. H., Qian, J., & He, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56732 · Cited by 1
Xie, W., Zhang, S., Gong, X., Zhao, C., & Zou, G. (2024) · Polymer Science Series B · doi:10.1134/s1560090425600238 · Cited by 1
Optimization of Parameters of Synthesis of Carbon Sorbents Modified with Hydroxic Acids
P’yanova, L. G., Лавренов, А. В., Корниенко, Н. В., & Ogurtsova, D. N. (2020) · Protection of Metals and Physical Chemistry of Surfaces · doi:10.1134/s2070205120060180 · Cited by 1
A bioresorbable MgZn binary alloy strengthened poly-lactic acid matrix composite
Dwijaya, M. S., Rokhmanto, F., Lestari, F. P., Utomo, M. S., Asmaria, T., Hakim, R. N., & Kartika, I. (2021) · AIP conference proceedings · doi:10.1063/5.0048527 · Cited by 1
Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00009-1 · Cited by 1
Self-citationda Cunha, R. B., Rodrigues, Y. O., & de Mélo, T. J. A. (2022) · Research Society and Development · doi:10.33448/rsd-v11i8.31488 · Cited by 1
Polylactic Acid/Halloysite Nanotube Bionanocomposite Films for Food Packaging
Emam‐Djomeh, Z., & Hajikhani, M. (2022) · Advanced structured materials · doi:10.1007/978-3-031-13343-5_5 · Cited by 1
Study on Adsorption of Essential Oils on Polylactic Acid Microparticles
Virág, L., Bocsi, R., & Pethő, D. (2022) · Hungarian Journal of Industry and Chemistry · doi:10.33927/hjic-2022-17 · Cited by 1
Zhao, Q., He, Z., Tang, L., Pan, Y., Chang, S., Zhang, N., & He, B. (2026) · Journal of Materials Chemistry B · doi:10.1039/d6tb00719h
Nesaule, A. Ē., Didrihsone, E., Merijs‐Meri, R., Grīgs, O., & Zicāns, J. (2020) · Key engineering materials · doi:10.4028/www.scientific.net/kem.850.118
Review 2: Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends
Salehiyan, R. (2020) · Experimental Results · doi:10.1017/exp.2020.54.pr2
Review 3: Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends
(2020) · Experimental Results · doi:10.1017/exp.2020.54.pr3
Review 1: Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends
Godinho, M. H. (2020) · Experimental Results · doi:10.1017/exp.2020.54.pr1
Liu, R., & Zhao, Y. (2021) · Science of Advanced Materials · doi:10.1166/sam.2021.3899
Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00010-8
Self-citationNofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00008-x
Self-citationAdvanced Biopolymer-Based Nanocomposites and Hybrid Materials
Silvestre, A. J. D., Freire, C. S. R., & Vilela, C. (2021) · MDPI eBooks · doi:10.3390/books978-3-0365-0511-4
Matuana, L. M. (2022) · doi:10.1002/9781119767480.ch15
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14
"Research and Comparison on Modification of Medical Polylactic Acid"
Li, Y. (2022) · Biomedical Journal of Scientific & Technical Research · doi:10.26717/bjstr.2022.43.006915
Biyokompozit membran ile yağlı atık suların saflaştırılması
Nigiz, F. U. (2022) · Afyon Kocatepe University Journal of Sciences and Engineering · doi:10.35414/akufemubid.1147928
Lai, W., Liau, W., Yang, L., & Lin, T.-T. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04787-5
Shawaphun, S., & Manangan, T. (2023) · Journal of Applied Science and Emerging Technology · doi:10.14416/jaset.kmutnb.2023.01.009
Metadata
- Authors
- Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C.
- Affiliations
- Istanbul Technical University (TR)
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Nofar, Mohammadreza
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 125
- Pages
- 307-360
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2904736796
- Cited by
- 780
- References
- 732
- Citations by year
- 2026: 69 · 2025: 94 · 2024: 123 · 2023: 149 · 2022: 95 · 2021: 120 · 2020: 98 · 2019: 32
- FWCI
- 4.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Biological Macromolecules (publishedVersion)
- PubMed (publishedVersion)
- Istanbul Technical University Academic Open Archive (Istanbul Technical University) (submittedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, PLA blends, biodegradable polymers, poly(L-lactic acid), poly(D-lactide), stereocomplex crystals, immiscible polymer blends, miscible polymer blends, ternary mixtures, polymer nanocomposites, polymer processing, crystallization, morphology-property relationship, biomedical applications, petroleum substitute
- MeSH terms
- Biocompatible Materials, Biopolymers, Crystallization, Polyesters, Stereoisomerism, Nanocomposites, Mechanical Phenomena, Chemical Phenomena, Polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
