The DOI matches its Crossref record.
The Sleipner storage site: Capillary flow modeling of a layered CO2 plume requires fractured shale barriers within the Utsira Formation
Open accessAbstract
To prevent ocean acidification and mitigate greenhouse gas emissions, it is necessary to capture and store carbon dioxide. The Sleipner storage site, offshore Norway, is the world's first and largest engineered waste repository for a greenhouse gas. CO2 is separated from the Sleipner gas condensate field and stored in the pore space of the Utsira Formation, a saline aquifer approximately 1 km below the surface and 200 km from the coast. Statoil, the field operator, has injected almost 1 Mt/yr of captured CO2 into the storage site since 1996. The buoyant CO2 plume ascended rapidly through eight thin shale barriers within the aquifer to reach the top seal in less than three years. The plume's progress has been monitored by eight seismic surveys, as well as gravimetric and electromagnetic monitoring, which record the spreading of nine thin CO2 layers. This paper presents a capillary flow model using invasion percolation physics that accurately matches the plume's geometry. The approach differs from standard Darcy flow simulations, which fail to match the plume geometry. The calibrated capillary flow simulation indicates that a mass balance for the plume is likely, but can only replicate the plume geometry if the thin intra-formational shale barriers are fractured. The model enables an estimate of the shale barrier behavior and caprock performance. The fractures are very unlikely to have been caused by CO2 injection given the confining stress of the rock and weak overpressure of the plume, and so fracturing must pre-date injection. A novel mechanism is suggested: the deglaciation of regional ice sheets that have rapidly and repeatedly unloaded approximately 1 km of ice. The induced transient pore pressures are sufficient to hydro-fracture thin shales. The fractures enable fast CO2 ascent, resulting in a multi-layered plume. Shallow CO2 storage sites in the Northern North Sea and other regions that have been loaded by Quaternary ice sheets are likely to behave in a similar manner.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Ajayi, T., Gomes, J. S., & Bera, A. (2019) · Petroleum Science · doi:10.1007/s12182-019-0340-8 · Cited by 684
Celia, M. A., Bachu, S., Nordbotten, J. M., & Bandilla, K. W. (2015) · Water Resources Research · doi:10.1002/2015wr017609 · Cited by 465
The Nanoscale Basis of CO2 Trapping for Geologic Storage
Bourg, I. C., Beckingham, L. E., & DePaolo, D. J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03003 · Cited by 163
Metadata
- Authors
- Cavanagh, A. J., & Haszeldine, R. S.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2014-02
- Volume
- 21
- Pages
- 101-112
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2096665245
- Cited by
- 209
- References
- 0
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Sleipner storage site: Capillary flow modeling of a layered CO2 plume requires fractured shale barriers within the Utsira Formation. https://app.cochat.ai/papers/10.1016/j.ijggc.2013.11.017
- The paper
- Cavanagh, A. J., & Haszeldine, R. S. (2014). The Sleipner storage site: Capillary flow modeling of a layered CO2 plume requires fractured shale barriers within the Utsira Formation. International Journal of Greenhouse Gas Control. https://doi.org/10.1016/j.ijggc.2013.11.017
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.