The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources
Open accessAbstract
In order to meet the IPCC recommendation for an 80% cut in CO 2 emissions by 2050, industries will be required to drastically reduce their emissions. To meet these targets, technologies such as carbon capture and storage (CCS) must be part of the economic set of decarbonisation options for industry. A systematic review of the literature has been carried out on four of the largest industrial sectors (the iron and steel industry, the cement industry, the petroleum refining industry and the pulp and paper industry) as well as selected high-purity sources of CO 2 from other industries to assess the applicability of different CCS technologies. Costing data have been gathered, and for the cement, iron and steel and refining industries, these data are used in a model to project costs per tonne of CO 2 avoided over the time period extending from first deployment until 2050. A sensitivity analysis was carried out on the model to assess which variables had the greatest impact on the overall cost of wide-scale CCS deployment for future better targeting of cost reduction measures. The factors found to have the greatest overall impact were the initial cost of CCS at the start of deployment and the start date at which large scale deployment is started, whilst a slower initial deployment rate after the start date also leads to significantly increased costs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE
Shine, K. (1990) · Weather · doi:10.1002/j.1477-8696.1990.tb05660.x · Cited by 5,462
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationComparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Self-citationCO2 Capture in the Cement Industry
Barker, D. J., Turner, S. A., Napier-Moore, P. A., Clark, M., & Davison, J. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.014 · Cited by 313
Use of experience curves to estimate the future cost of power plants with CO2 capture
Rubin, E. S., Yeh, S., Antes, M., Berkenpas, M., & Davison, J. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00016-3 · Cited by 288
A brief overview of low CO2 emission technologies for iron and steel making
Xu, C. C., & Cang, D.-Q. (2010) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(10)60064-7 · Cited by 255
Cost evaluation of CO2 sequestration by aqueous mineral carbonation
Huijgen, W. J. J., Comans, R. N. J., & Witkamp, G.-J. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.01.035 · Cited by 249
Using CaO- and MgO-rich industrial waste streams for carbon sequestration
Stolaroff, J. K., Lowry, G. V., & Keith, D. W. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.009 · Cited by 224
Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2
Said, A., Mattila, H.-P., Järvinen, M., & Zevenhoven, R. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.042 · Cited by 173
CO2 removal in the iron and steel industry
Gielen, D. J. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00111-5 · Cited by 163
World Greenhouse Gas Emissions in 2005
Herzog, T. (2009) · Cited by 158
Assessment of CO2 capture technologies in cement manufacturing process
Vatopoulos, K., & Tzimas, E. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.03.013 · Cited by 155
CO2 capture for refineries, a practical approach
van Straelen, J., Geuzebroek, F., Goodchild, N., Protopapas, G., & Mahony, L. (2009) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2009.09.022 · Cited by 155
Comparison of MEA capture cost for low CO2 emissions sources in Australia
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.06.004 · Cited by 132
Carbon dioxide recovery from industrial processes
Farla, J. C. M., Hendriks, C. A., & Blok, K. (1995) · Climatic Change · doi:10.1007/bf01092428 · Cited by 130
Dean, C. C., Dugwell, D. R., & Fennell, P. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01282g · Cited by 124
Self-citationMöllersten, K., Yan, J., & Westermark, M. O. J. (2003) · Energy · doi:10.1016/s0360-5442(03)00002-1 · Cited by 122
Post-combustion capture of CO2 at an integrated steel mill – Part I: Technical concept analysis
Arasto, A., Tsupari, E., Kärki, J., Pisilä, E., & Sorsamäki, L. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.08.018 · Cited by 117
CO2 Capture from Cement Plants Using Oxyfired Precalcination and/or Calcium Looping
Rodríguez, N., Murillo, R., & Abánades, J. C. (2012) · Environmental Science & Technology · doi:10.1021/es2030593 · Cited by 114
Realistic costs of carbon capture
Al-Juaied, M., & Whitmore, A. (2009) · doi:10.2172/960194 · Cited by 108
LEILAC: Low Cost CO2 Capture for the Cement and Lime Industries
Hills, T., Sceats, M. G., Rennie, D., & Fennell, P. S. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1753 · Cited by 99
Self-citationRomeo, L. M., Catalina, D., Lisbona, P., Lara, Y., & Martínez, A. (2011) · Greenhouse Gases Science and Technology · doi:10.1002/ghg3.5 · Cited by 92
Efficient energy systems with CO2 capture and storage from renewable biomass in pulp and paper mills
Möllersten, K., Gao, L., Yan, J., & Obersteiner, M. H. (2004) · Renewable Energy · doi:10.1016/j.renene.2004.01.003 · Cited by 86
Post-combustion capture of CO2 at an integrated steel mill – Part II: Economic feasibility
Tsupari, E., Kärki, J., Arasto, A., & Pisilä, E. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.08.017 · Cited by 82
Assessment of opportunities for CO2 capture at iron and steel mills: An Australian perspective
Wiley, D. E., Ho, M. T., & Bustamante, A. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.02.165 · Cited by 81
Pettersson, K., & Harvey, S. (2011) · Energy · doi:10.1016/j.energy.2011.10.020 · Cited by 78
A Brief Overview of Low CO2 Emission Technologies for Iron and Steel Making
Chunbao, Charles, Xu, X., et al. (2010) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 63
Costs and Potential of Carbon Capture and Storage at an Integrated Steel Mill
Arasto, A., Tsupari, E., Kärki, J., Sihvonen, M., & Lilja, J. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.648 · Cited by 49
Analysing the potential for implementation of CCS within the European pulp and paper industry
Jönsson, J., & Berntsson, T. S. (2012) · Energy · doi:10.1016/j.energy.2012.05.028 · Cited by 41
Mesfun, S., & Toffolo, A. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.016 · Cited by 38
McGrail, B. P., Freeman, C. J., Brown, C. F., Sullivan, E. C., White, S. K., Reddy, S. N., Garber, R. D., Tobin, D., Gilmartin, J., & Steffensen, E. J. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.03.009 · Cited by 34
Phase evolution, characterisation, and performance of cement prepared in an oxy-fuel atmosphere
Zheng, L., Hills, T., & Fennell, P. S. (2016) · Faraday Discussions · doi:10.1039/c6fd00032k · Cited by 27
Self-citationFischedick, M., Roy, J., Acquaye, A. A., Allwood, J. M., Céron, J.-P., Geng, Y., Kheshgi, H. S., Lanza, A., Perczyk, D., Price, L., et al. (2014) · Kent Academic Repository (University of Kent) · Cited by 23
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Self-citationTechno-economic assessment of CO2 direct air capture plants
Fasihi, M., Efimova, O., & Breyer, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.086 · Cited by 1,171
Rissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
“These process emissions are ideally suited for carbon capture because there is no need to filter out atmospheric nitrogen [143].”
BackgroundSelf-citationGür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
Metadata
- Authors
- Leeson, D., Mac Dowell, N., Shah, N., Petit, C., & Fennell, P. S.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 61
- Pages
- 71-84
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2605965223
- Cited by
- 558
- References
- 35
- FWCI
- 5.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.