Supercritical water gasification of sewage sludge and combined cycle for H2 and power production – A thermodynamic study
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
An integrated system of supercritical water gasification (SCWG) and combined cycle has been developed for H2 production and power generation. Sewage sludge and lignite coal were selected as raw material in this simulation. The effects of feed concentration (10–30 wt%) and lignite coal addition (0–50 wt%) on syngas yield and H2 yield were also investigated in the temperature range of 500 °C–700 °C. Several heat exchangers were considered in the proposed integrated system to minimize energy loss. High pressure syngas was expanded by using turbo-expander to produce electricity, resulting in the improvement of the total efficiency. The results showed that the minimum feed concentrations of 14.25 wt%, 18.75 wt%, and 25.50 wt% were required to achieve self-sufficient energy at 500 °C, 600 °C, and 700 °C, respectively. However, the lower feed concentration and higher temperature were preferable for syngas production. The highest syngas and H2 yield were obtained at 700 °C and 10 wt% feed concentration. The SCWG could produce 178.08 kg syngas from 100 kg feed and 9.06 kg H2 were obtained after H2 separation. The total power generation from turbo-expander and combined cycle module was 48.37 kW. By combining SCWG and combined cycle, the total efficiency could reach 63.48%. It worth mentioning that the addition of lignite coal could help reduce the minimum feed concentration to achieve autothermal condition, but did not have significant improvement on H2 production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Supercritical Water Gasification of Coal with Waste Black Liquor as Inexpensive Additives
Cao, C., Guo, L., Yin, J., Jin, H., Cao, W., Jia, Y., & Yao, X. (2015) · Energy & Fuels · doi:10.1021/ef502110d · Cited by 74
Cited by
Hydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Sulfur conversion and distribution during supercritical water gasification of sewage sludge
Yan, M., Feng, H., Zheng, R., Yu, C., Hantoko, D., Zhou, Z., Zhang, Y., & Kanchanatip, E. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.01.002 · Cited by 50
Self-citationLin, J., Liao, Q., Hu, Y., Ma, R., Cui, C., Sun, S., & Liu, X. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123678 · Cited by 50
Metadata
- Authors
- Hantoko, D., Yan, M., Kanchanatip, E., Adnan, M. A., Antoni, Mubeen, I., & Hamid, F. S.
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 44
- Issue
- 45
- Pages
- 24459-24470
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W2969557873
- Cited by
- 70
- References
- 2
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.