The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability
Open accessAbstract
In response to hypercompetition, globalisation and increasing consumer expectations, many manufacturing firms have embraced lean manufacturing (LM). The primary goal of LM is to reduce/eliminate waste (muda). There is broad consensus as to what constitutes waste, but not on LM implementation. Implementation is not prescriptive with each firm relying on a different combination of administrative, process and routine change / innovation. Lean manufacturing brings about incremental change relying on administrative, process and routine levers. It best fits mass production where process variability is low and demand is high and stable. Lean manufacturing can significantly reduce waste but not eliminate waste, and the attained benefits have not always lived up to expectations. Additive manufacturing (AM) promises to revolutionise manufacturing beyond recognition by eliminating or drastically removing the waste thereby achieving sustainability. But AM is at its formative stage – the space between the concept and growth - where many promising breakthrough technologies fail. To reach its full potential, it needs to achieve high-scale adoption. In this paper, we examine how AM can significantly reduce/eliminate waste and how it can deliver triple bottom line on an unprecedented scale. We contend that AM, if adopted deeply and widely, will take LM to its final frontier, but there are a number of impediments to this end. We identify legitimation as critical to its wide diffusion and develop a number of propositions expediting AM’s legitimation. Legitimation of AM will ensure its deep and broad diffusion and should this happen, waste will be a thing of the past an important stride towards sustainable future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A contribution to the theory of economic growth
Solow, R. M. (1956) · The Quarterly Journal of Economics · doi:10.2307/1884513 · Cited by 24,483
Managing Legitimacy: Strategic and Institutional Approaches
Suchman, M. C. (1995) · The Academy of Management Review · doi:10.2307/258788 · Cited by 19,903 · cited 2×
“…on the expectations generated by the future potential of the technology – as might be the case for technologies in their formative phase – this can have a negative impact on audiences that can interpret it as a self-interested act, leading, as Suchman (1995) argues, to self-promoter paradoxes.”
Social Structure and Organizations
Stinchcombe, A. L. (2004) · Advances in Strategic Management · doi:10.1016/s0742-3322(00)17019-6 · Cited by 4,347
Lean Thinking—Banish Waste and Create Wealth in your Corporation
Womack, J. P., & Jones, D. T. (1997) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600967 · Cited by 2,122
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950 · cited 2×
“Moreover, the first global study on AM and sustainability estimates that AM – as being used today – would only have a residual impact of approximately 5 per cent in the reduction of industrial CO2 emissions and energy consumption by 2025 (Gebler et al., 2014).”
Bevilacqua, M., Ciarapica, F. E., & De Sanctis, I. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1211346 · Cited by 164 · cited 4×
“Summary Lean manufacturing is predicated on the concept that any activity/action that fails to create value for customers is waste or muda and should be reduced/removed (Bevilacqua et al., 2017).”
Influential
Cited by
Elia, S., Giuffrida, M., Mariani, M. M., & Bresciani, S. (2021) · Journal of Business Research · doi:10.1016/j.jbusres.2021.04.010 · Cited by 426
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
Delic, M., & Eyers, D. R. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107689 · Cited by 325
Green supply chain innovation: Emergence, adoption, and challenges
Feng, Y., Lai, K.-H., & Zhu, Q. (2022) · International Journal of Production Economics · doi:10.1016/j.ijpe.2022.108497 · Cited by 299
Antony, J., Psomas, E., Garza-Reyes, J. A., & Hines, P. (2021) · Production Planning & Control · doi:10.1080/09537287.2020.1776410 · Cited by 116
“Lean Manufacturing (LM) has been one of the most widely accepted manufacturing strategies and management styles deployed by organisations worldwide to enhance their business performance (Ghobadian et al. 2020) and boost their competitiveness (Abreu-Ledon et al. 2018; Galeazzo and Furlan 2018).”
BackgroundInfluentialSelf-citation
Metadata
- Authors
- Ghobadian, A., Talavera, I., Bhattacharya, A., Kumar, V., Garza-Reyes, J. A., & O'Regan, N.
- Venue
- International Journal of Production Economics
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 219
- Pages
- 457-468
- ISSN
- 0925-5273 (ISSN-L)
- OpenAlex
- W2806160566
- Cited by
- 230
- References
- 6
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability. https://app.cochat.ai/papers/10.1016/j.ijpe.2018.06.001
- The paper
- Ghobadian, A., Talavera, I., Bhattacharya, A., Kumar, V., Garza-Reyes, J. A., & O'Regan, N. (2020). Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2018.06.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.