The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Progress towards standardized and validated characterizations for measuring physicochemical properties of manufactured nanomaterials relevant to nano health and safety risks
Open accessAbstract
Managing the risks of manufactured nanomaterials requires the ability to accurately and reproducibly measure the physical and chemical properties of these materials that are relevant to their risk assessment. However, many properties of manufactured nanomaterials and their non-equilibrium system-dependent behaviors challenge many of the conventional characterization methods used to characterize them. New methods and modifications to conventional methods are being developed to address some of these shortcomings. Here, we critically review progress towards standardization and validation of methods used to characterize manufactured nanomaterials to assess their health and safety risks. The limitations and accessibility of each method are presented, and recommendations towards improving method standardization are made where appropriate. The properties considered include intrinsic (system independent) nanomaterial properties; particle size distribution, specific surface area, particle shape, hydrophobicity, chemical composition, redox potential and band gap, and extrinsic (system dependent) properties; density, dustiness, zeta potential, agglomeration rate and surface affinity, dissolution rate and solubility, and reactive oxygen species generation. The methods evaluated include organisation for economic cooperation and development (OECD) test guidelines, NanoValid standard operating procedures, NANoREG protocols and methods being proposed by peer-reviewed publications. Compared with the characterization of intrinsic properties, the characterization of extrinsic properties is generally less validated and less reproducible. This is mainly because the medium properties may have significant effects on the result. Thus, reporting of extrinsic properties will need to include associated meta-data to make them comparable across studies. While some methods are becoming standardized and even automated, the full range of factors influencing the reliability and reproducibility of those measurements had not yet been well characterized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular uptake of nanoparticles: Journey inside the cell
Behzadi, S., Serpooshan, V., Tao, W., Hamaly, M. A., Alkawareek, M. Y., Dreaden, E. C., Brown, D., Alkilany, A. M., Farokhzad, O. C., & Mahmoudi, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00636a · Cited by 2,859
Filipe, V., Hawe, A., & Jiskoot, W. (2010) · Pharmaceutical Research · doi:10.1007/s11095-010-0073-2 · Cited by 1,885
Nagai, H., Okazaki, Y., Chew, S. H., Misawa, N., Yamashita, Y., Akatsuka, S., Ishihara, T., Yamashita, K., Yoshikawa, Y., Yasui, H., et al. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1110013108 · Cited by 535
Skin DNA photodamage and its biological consequences
Marrot, L., & Meunier, J.-R. (2008) · Journal of the American Academy of Dermatology · doi:10.1016/j.jaad.2007.12.007 · Cited by 343
Estimating the effective density of engineered nanomaterials for in vitro dosimetry
DeLoid, G., Cohen, J. M., Darrah, T., Derk, R., Rojanasakul, L., Pyrgiotakis, G., Wohlleben, W., & Demokritou, P. (2014) · Nature Communications · doi:10.1038/ncomms4514 · Cited by 327
Modeling Nanomaterial Environmental Fate in Aquatic Systems
Dale, A. L., Casman, E. A., Lowry, G. V., Lead, J. R., Viparelli, E., & Baalousha, M. (2015) · Environmental Science & Technology · doi:10.1021/es505076w · Cited by 286
Self-citation
Cited by
Safety Assessment of Graphene-Based Materials: Focus on Human Health and the Environment
Fadeel, B., Bussy, C., Merino, S., Vázquez, E., Flahaut, E., Mouchet, F., Evariste, L., Gauthier, L., Koivisto, A. J., Vogel, U., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b04758 · Cited by 671
Current hurdles to the translation of nanomedicines from bench to the clinic
Đorđević, S., Gonzalez, M. M., Conejos-Sánchez, I., Carreira, B., Pozzi, S., Acúrcio, R. C., Satchi-Fainaro, R., Florindo, H. F., & Vicent, M. J. (2022) · Drug Delivery and Translational Research · doi:10.1007/s13346-021-01024-2 · Cited by 657
Mazari, S. A., Ali, E., Abro, R., Khan, F. S. A., Ahmed, I., Ahmed, M., Nizamuddin, S., Siddiqui, T. H., Hossain, N., Mubarak, N. M., et al. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105028 · Cited by 316
In vivo effects: Methodologies and biokinetics of inhaled nanomaterials
Oberdörster, G., & Kuhlbusch, T. A. J. (2018) · NanoImpact · doi:10.1016/j.impact.2017.10.007 · Cited by 88
Magnetic Iron Nanoparticles: Synthesis, Surface Enhancements, and Biological Challenges
Vargas-Ortiz, J. R., Gonzalez, C., & Esquivel, K. (2022) · Processes · doi:10.3390/pr10112282 · Cited by 62
Metadata
- Authors
- Gao, X., & Lowry, G. V.
- Venue
- NanoImpact
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 9
- Pages
- 14-30
- ISSN
- 2452-0748 (ISSN-L)
- OpenAlex
- W2761890559
- Cited by
- 168
- References
- 6
- FWCI
- 6.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress towards standardized and validated characterizations for measuring physicochemical properties of manufactured nanomaterials relevant to nano health and safety risks. https://app.cochat.ai/papers/10.1016/j.impact.2017.09.002
- The paper
- Gao, X., & Lowry, G. V. (2018). Progress towards standardized and validated characterizations for measuring physicochemical properties of manufactured nanomaterials relevant to nano health and safety risks. NanoImpact. https://doi.org/10.1016/j.impact.2017.09.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.