The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Predictive maintenance using digital twins: A systematic literature review
Open accessAbstract
Predictive maintenance is a technique for creating a more sustainable, safe, and profitable industry. One of the key challenges for creating predictive maintenance systems is the lack of failure data, as the machine is frequently repaired before failure. Digital Twins provide a real-time representation of the physical machine and generate data, such as asset degradation, which the predictive maintenance algorithm can use. Since 2018, scientific literature on the utilization of Digital Twins for predictive maintenance has accelerated, indicating the need for a thorough review. This research aims to gather and synthesize the studies that focus on predictive maintenance using Digital Twins to pave the way for further research. A systematic literature review (SLR) using an active learning tool is conducted on published primary studies on predictive maintenance using Digital Twins, in which 42 primary studies have been analyzed. This SLR identifies several aspects of predictive maintenance using Digital Twins, including the objectives, application domains, Digital Twin platforms, Digital Twin representation types, approaches, abstraction levels, design patterns, communication protocols, twinning parameters, and challenges and solution directions. These results contribute to a Software Engineering approach for developing predictive maintenance using Digital Twins in academics and the industry. This study is the first SLR in predictive maintenance using Digital Twins. We answer key questions for designing a successful predictive maintenance model leveraging Digital Twins. We found that to this day, computational burden, data variety, and complexity of models, assets, or components are the key challenges in designing these models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
The fourth industrial revolution
Schwab, K. (n.d.) · Cited by 2,997
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Digital twin paradigm: A systematic literature review
Semeraro, C., Lezoche, M., Panetto, H., & Dassisti, M. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103469 · Cited by 986
The Fourth Industrial Revolution
Chow, C., & Leung, C. (2018) · Redefining University Leadership for the 21st Century · doi:10.2174/9781681087498118010017 · Cited by 808
Digital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 741
Manner, J., Haarmann, S., Kolb, S., Herzberg, N., & Kopp, O. (2021) · Cited by 732
Zheng, T., Ardolino, M., Bacchetti, A., & Perona, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1824085 · Cited by 728
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
A hybrid predictive maintenance approach for CNC machine tool driven by Digital Twin
Luo, W., Hu, T., Ye, Y., Zhang, C., & Wei, Y. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101974 · Cited by 519
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
The internet of things for smart manufacturing: A review
Yang, H., Kumara, S., Bukkapatnam, S. T. S., & Tsung, F. (2019) · IISE Transactions · doi:10.1080/24725854.2018.1555383 · Cited by 449
The use of Digital Twin for predictive maintenance in manufacturing
Aivaliotis, P., Georgoulias, K., & Chryssolouris, G. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1686173 · Cited by 437
Automation of systematic literature reviews: A systematic literature review
van Dinter, R., Tekinerdogan, B., & Catal, C. (2021) · Information and Software Technology · doi:10.1016/j.infsof.2021.106589 · Cited by 432
Self-citationAugmented reality in support of intelligent manufacturing – A systematic literature review
Egger, J., & Masood, T. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106195 · Cited by 391
Hosamo, H. H., Svennevig, P. R., Svidt, K., Han, D., & Nielsen, H. K. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111988 · Cited by 322
Requirements of the Smart Factory System: A Survey and Perspective
Mabkhot, M. M., Al-Ahmari, A. M., Salah, B., & Alkhalefah, H. (2018) · Machines · doi:10.3390/machines6020023 · Cited by 282
Deep digital twins for detection, diagnostics and prognostics
Booyse, W., Wilke, D. N., & Heyns, S. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106612 · Cited by 274
Artificial intelligence (AI) in augmented reality (AR)-assisted manufacturing applications: a review
Sahu, C. K., Young, C., & Rai, R. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1859636 · Cited by 256
Remaining Useful Life Prediction using Deep Learning Approaches: A Review
Wang, Y., Zhao, Y., & Addepalli, S. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.06.015 · Cited by 246
Aivaliotis, P., Georgoulias, K., Arkouli, Z., & Makris, S. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.072 · Cited by 242
Digital Twin Models in Industrial Operations: A Systematic Literature Review
Melesse, T. Y., Pasquale, V. D., & Riemma, S. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.02.084 · Cited by 227
Digital twin–driven aero-engine intelligent predictive maintenance
Xiong, M., Wang, H., Fu, Q., & Xu, Y. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06976-w · Cited by 194
Lattanzi, L., Raffaeli, R., Peruzzini, M., & Pellicciari, M. (2021) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2021.1911003 · Cited by 185
Meraghni, S., Terrissa, L. S., Yue, M., Ma, J., Jemei, S., & Zerhouni, N. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.10.108 · Cited by 181
Digital twin design for real-time monitoring – a case study of die cutting machine
Wang, K.-J., Lee, Y.-H., & Angelica, S. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1817999 · Cited by 178
Digital Twin for Machining Tool Condition Prediction
Qiao, Q., Wang, J., Ye, L., & Gao, R. X. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.049 · Cited by 173
A Digital Twin approach based on nonparametric Bayesian network for complex system health monitoring
Yu, J., Song, Y., Tang, D., & Dai, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.005 · Cited by 168
Machine-Learning-Driven Digital Twin for Lifecycle Management of Complex Equipment
Ren, Z., Wan, J., & Deng, P. (2022) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2022.3143346 · Cited by 158
Obstacles and features of Farm Management Information Systems: A systematic literature review
Tummers, J., Kassahun, A., & Tekinerdoğan, B. (2019) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2018.12.044 · Cited by 153
Mi, S., Feng, Y., Zheng, H., Wang, Y., Gao, Y., & Tan, J. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.001 · Cited by 148
Kang, Z., Catal, C., & Tekinerdoğan, B. (2021) · Sensors · doi:10.3390/s21030932 · Cited by 147
Self-citationSystems Architecture Design Pattern Catalog for Developing Digital Twins
Tekinerdoğan, B., & Verdouw, C. N. (2020) · Sensors · doi:10.3390/s20185103 · Cited by 139
Digitalisation and servitisation of machine tools in the era of Industry 4.0: a review
Liu, C., Zheng, P., & Xu, X. W. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1969462 · Cited by 135
Digital twin for oil pipeline risk estimation using prognostic and machine learning techniques
Priyanka, E. B., Thangavel, S., Gao, X., & Sivakumar, N. (2021) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100272 · Cited by 130
Aivaliotis, P., Arkouli, Z., Georgoulias, K., & Makris, S. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102177 · Cited by 129
A procedural approach for realizing prescriptive maintenance planning in manufacturing industries
Matyas, K., Nemeth, T., Kovács, K., & Glawar, R. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.007 · Cited by 126
Digital Twin-Driven Remaining Useful Life Prediction for Gear Performance Degradation: A Review
He, B., Liu, L., & Zhang, D. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4049537 · Cited by 119
Digital twin based condition monitoring of a knuckle boom crane: An experimental study
Moi, T., Cibicik, A., & Rølvåg, T. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2020.104517 · Cited by 118
Digital‐twin assisted: Fault diagnosis using deep transfer learning for machining tool condition
Deebak, B. D., & Al-Turjman, F. M. (2021) · International Journal of Intelligent Systems · doi:10.1002/int.22493 · Cited by 110
Machine health management in smart factory: A review
Lee, G.-Y., Kim, M., Quan, Y., Kim, M., Kim, T. J. Y., Yoon, H.-S., Min, S., Kim, D.-H., Mun, J.-W., Oh, J. W., et al. (2018) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-018-0201-1 · Cited by 108
Digital Twin of an Automotive Brake Pad for Predictive Maintenance
Rajesh, P. K., Manikandan, N., Ramshankar, C. S., Vishwanathan, T., & Sathishkumar, C. (2019) · Procedia Computer Science · doi:10.1016/j.procs.2020.01.061 · Cited by 107
Proceedings of the 29th European Safety and Reliability Conference (ESREL)
Hasan, S. M. T., Kaium, A., Ahmed, S., Mehmood, S., Kristensen, A., & Ahsan, D. (2019) · doi:10.3850/978-981-11-2724-3 · Cited by 106
Advances of Digital Twins for Predictive Maintenance
You, Y., Chen, C., Hu, F., Liu, Y., & Ji, Z. (2022) · Procedia Computer Science · doi:10.1016/j.procs.2022.01.348 · Cited by 98
Moghadam, F. K., Rebouças, G. F. D. S., & Nejad, A. R. (2021) · Forschung im Ingenieurwesen · doi:10.1007/s10010-021-00468-9 · Cited by 97
A systematic review of comparative evidence of aspect-oriented programming
Ali, M. S., Ali Babar, M., Chen, L., & Stol, K.-J. (2010) · Information and Software Technology · doi:10.1016/j.infsof.2010.05.003 · Cited by 89
Model-based testing for software safety: a systematic mapping study
Gurbuz, H. G., & Tekinerdogan, B. (2018) · Software Quality Journal · doi:10.1007/s11219-017-9386-2 · Cited by 78 · cited 1×
“While developing the quality assessment criteria, the summary quality checklist for quantitative and qualitative studies has been adopted, as proposed by [7] and [36].”
MethodHallaji, S. M., Fang, Y., & Winfrey, B. K. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.104049 · Cited by 77
Oluwasegun, A., & Jung, J.-C. (2020) · Nuclear Engineering and Technology · doi:10.1016/j.net.2020.03.028 · Cited by 73
Wu, Z., & Li, J. (2021) · Procedia Manufacturing · doi:10.1016/j.promfg.2021.10.020 · Cited by 63
Short, M., & Twiddle, J. A. (2019) · Sensors · doi:10.3390/s19173781 · Cited by 62
A smart process controller framework for Industry 4.0 settings
Cohen, Y., & Singer, G. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01748-5 · Cited by 54
Desai, P. S., Granja, V., & Higgs, C. F. (2021) · Processes · doi:10.3390/pr9060922 · Cited by 52
Cattaneo, L., & Macchi, M. (2019) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2019.10.016 · Cited by 48
Tygesen, U. T., Worden, K., Rogers, T. J., Manson, G., & Cross, E. J. (2018) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-319-74421-6_30 · Cited by 38
Digital Twins in Mechatronics: From Model-based Control to Predictive Maintenance
Classens, K., Heemels, W. P. M. H., & Oomen, T. (2021) · IEEE International Conference on Digital Twins and Parallel Intelligence (DTPI) · doi:10.1109/dtpi52967.2021.9540144 · Cited by 35
Text mining techniques for the management of predictive maintenance
Nota, G., Postiglione, A., & Carvello, R. (2022) · Procedia Computer Science · doi:10.1016/j.procs.2022.01.276 · Cited by 33
LIVE Digital Twin for Smart Maintenance in Structural Systems
Malek, N. G., Tayefeh, M., Bender, D., et al. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.124 · Cited by 26
Panagou, S., Fruggiero, F., Lerra, M., Vecchio, C. D., Menchetti, F., Piedimonte, L., Natale, O. R., & Passariello, S. (2022) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2022.04.182 · Cited by 26
Predictive Maintenance on Aircraft and Applications with Digital Twin
Heim, S., Clemens, J., Steck, J. E., Basic, C., Timmons, D., & Zwiener, K. (2020) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata50022.2020.9378433 · Cited by 24
Altun, C., & Tavlı, B. (2019) · Telecommunications Forum (TELFOR) · doi:10.1109/telfor48224.2019.8971348 · Cited by 19
2020 Annual Reliability and Maintainability Symposium (RAMS)
(2020) · doi:10.1109/rams48030.2020 · Cited by 19
Employing LIVE Digital Twin in Prognostic and Health Management: Identifying Location of the Sensors
Bondoc, A. E., Tayefeh, M., & Barari, A. (2022) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2022.04.183 · Cited by 17
Industrial IoT Devices and Cyber-Physical Production Systems: Review and Use Case
Masero, E., Dionísio, R., & Torres, P. M. B. (2018) · Lecture notes in electrical engineering · doi:10.1007/978-3-319-91334-6_40 · Cited by 16
Kaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Preprints.org · doi:10.20944/preprints202011.0591.v1 · Cited by 14
Streaming Synthetic Time Series for Simulated Condition Monitoring
Zenisek, J., Wolfartsberger, J., Sievi, C., & Affenzeller, M. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.391 · Cited by 11
Wang, Z., Dunbing, T., Changchun, L., Xiong, X., Zhang, L., Zhuocheng, Z., & Liu, X. (2021) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-nanjing52125.2021.9613117 · Cited by 9
Fault Diagnosis of Gearbox Based on Digital Twin Concept Model
Hu, J., Hu, N., Luo, P., & Yang, Y. (2021) · International Conference on Intelligent Robotics and Control Engineering (IRCE) · doi:10.1109/irce53649.2021.9570997 · Cited by 8
Predictive Maintenance Framework for Production Environments Using Digital Twin
Süve, M. F., Gezer, C., & İnce, G. (2021) · Lecture notes in networks and systems · doi:10.1007/978-3-030-85577-2_54 · Cited by 6
Cited by
Digital twin: benefits, use cases, challenges, and opportunities
Attaran, M., & Celik, B. G. (2023) · Decision Analytics Journal · doi:10.1016/j.dajour.2023.100165 · Cited by 704
Digital twin for healthcare systems
Vallée, A. (2023) · Frontiers in Digital Health · doi:10.3389/fdgth.2023.1253050 · Cited by 335
Advancements and challenges of digital twins in industry
Tao, F., Zhang, H., & Zhang, C. (2024) · Nature Computational Science · doi:10.1038/s43588-024-00603-w · Cited by 261
Digital twins and industrial internet of things: uncovering operational intelligence in Industry 4.0
Attaran, S., Attaran, M., & Celik, B. G. (2024) · Decision Analytics Journal · doi:10.1016/j.dajour.2024.100398 · Cited by 122
Literature review of digital twin technologies for civil infrastructure
Liu, C., Zhang, P., & Xu, X. (2023) · Journal of Infrastructure Intelligence and Resilience · doi:10.1016/j.iintel.2023.100050 · Cited by 98
Metadata
- Authors
- van Dinter, R., Tekinerdogan, B., & Catal, C.
- Venue
- Information and Software Technology
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 151
- Pages
- 107008
- ISSN
- 0950-5849 (ISSN-L)
- OpenAlex
- W4285032067
- Cited by
- 540
- References
- 72
- FWCI
- 10.99
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.