Contrasting effects of operating conditions and biomass particle size on bulk characteristics and surface chemistry of rice husk derived-biochars
Open accessThe DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
In this study, the slow pyrolysis of rice husk was conducted by using a split-tube furnace under a nitrogen environment to investigate the influence of various pyrolysis conditions and biomass particle sizes on products yield distribution as well as physicochemical characteristics and surface chemistry of produced biochars. Results revealed that temperature has a more pronounced influence on products yield compared to the other operational conditions. The biochar yield decreases from 57.13 ± 5.37% to 37.19 ± 2.05% and gaseous phase yield increase from 25.64 ± 0.93% to 42.50 ± 4.58% with temperature increase from 300 °C to 700 °C. The surface chemistry of produced biochar varies widely as the distribution of different functional groups on its surface influenced by operational conditions and biomass particle size; above 500 °C the intensity of FTIR vibrational peaks reduces abruptly. FTIR, SEM, elemental composition and surface area results indicate that biochar synthesized under higher pyrolysis temperature, extended retention time and, lower heating and gas flow rates with fine biomass particle size has utility as a potential C-sequestration and remedial agent to mitigate global climate change and adsorption of environmental pollutants, respectively. Furthermore, biochar has potential application as a renewable solid bio-fuel source due to higher calorific values. A cost-benefit analysis indicates that the viability of biochar saleable product system is more economical with an annual profit of 138,533$ for the low scenario, when the presumed unit processes 2500 tons y−1 of biomass. In a comparison to other presumed scenarios, this system is more feasible in areas where low-cost RH biomass waste is available abundantly such as in rice production and processing areas. The profitability of this system increases further by accounting pyrolysis-gas energy value that reduces operational cost. For the optimization of biochar economical yield with desired properties, this work provides insight knowledge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Sustainable biochar to mitigate global climate change
Woolf, D., Amonette, J. E., Street-Perrott, F. A., Lehmann, J., & Joseph, S. (2010) · Nature Communications · doi:10.1038/ncomms1053 · Cited by 2,680
Lehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477
Roberts, K. G., Gloy, B. A., Joseph, S., Scott, N. R., & Lehmann, J. (2010) · Environmental Science & Technology · doi:10.1021/es902266r · Cited by 1,243
Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.003 · Cited by 1,154
Characterization of biochars to evaluate recalcitrance and agronomic performance
Enders, A., Hanley, K., Whitman, T., Joseph, S., & Lehmann, J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.022 · Cited by 1,113
Ronsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000
Meeting US biofuel goals with less land: the potential of Miscanthus
HEATON, E. A., DOHLEMAN, F. G., & LONG, S. P. (2008) · Global Change Biology · doi:10.1111/j.1365-2486.2008.01662.x · Cited by 886
Gaunt, J. L., & Lehmann, J. (2008) · Environmental Science & Technology · doi:10.1021/es071361i · Cited by 631
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Cited by
An overview on engineering the surface area and porosity of biochar
Leng, L., Xiong, Q., Yang, L., Li, H., Zhou, Y., Zhang, W., Jiang, S., Li, H., & Huang, H. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144204 · Cited by 1,314
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Self-citationHoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
Self-citationThe costs and benefits of biochar production and use: A systematic review
Campion, L., Bekchanova, M., Malina, R., & Kuppens, T. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137138 · Cited by 268
Metadata
- Authors
- Abbas, Q., Liu, G., Yousaf, B., Ali, M. U., Ullah, H., Munir, M. A. M., & Liu, R.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 134
- Pages
- 281-292
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2809074175
- Cited by
- 129
- References
- 18
- FWCI
- 4.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Contrasting effects of operating conditions and biomass particle size on bulk characteristics and surface chemistry of rice husk derived-biochars. https://app.cochat.ai/papers/10.1016/j.jaap.2018.06.018
- The paper
- Abbas, Q., Liu, G., Yousaf, B., Ali, M. U., Ullah, H., Munir, M. A. M., & Liu, R. (2018). Contrasting effects of operating conditions and biomass particle size on bulk characteristics and surface chemistry of rice husk derived-biochars. Journal of Analytical and Applied Pyrolysis. https://doi.org/10.1016/j.jaap.2018.06.018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.