CoChat

Catalytic pyrolysis over transition metal-modified zeolites: A comparative study between catalyst activity and deactivation

Open access
Persson, H., Duman, I., Wang, S., Pettersson, L.J., Yang, W. · 2019 · Journal of Analytical and Applied Pyrolysis
Cited by 116

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

Abstract Using metal-doped zeolites in catalytic pyrolysis of biomass is a well-known approach to promote the formation of certain compounds. One of the major technical issues with such catalysts is their rapid deactivation due to coke formation. However, little is known about how metal-doping influences the characteristics of coking, such as coking rate and its composition. In this study, four different materials were experimentally evaluated based on their catalytic activity and coking characteristics: HZSM-5, Fe/ZSM-5, Ni/ZSM-5 and FeNi/ZSM-5. The materials were prepared and characterized followed by screening in a bench-scale setup for in-situ catalytic pyrolysis. The mass balance and composition of pyrolysis products including catalyst coke were analyzed. It was found that metal-doping increases the concentration of aromatic hydrocarbons in the liquid product from 59.0 to 82.8% of GC/MS peak area, especially monoaromatic hydrocarbons (MAHs) and naphthalenes. Fe mainly increases the selectivity of MAHs whereas Ni additionally promotes naphthalenes. FeNi/ZSM-5 reflects the combined effect of Fe- and Ni-doped catalysts. Regarding the catalyst coke composition, metal-doped catalysts present an increased concentration of aromatic hydrocarbons. For each catalyst, the chemical composition of the coke reflects the catalytic activity seen in vapor upgrading. Based on the findings in this work, a reaction pathway for metal-doped ZSM-5 and HZSM-5 is proposed. The results also show that metal-doping increases the formation of catalyst coke, mainly due to a higher concentration of strong acid sites. Also, the severity of coking was found to be dependent on the strength of acid sites. The coke yield increased from 3.5 wt% in the case of HZSM-5 to maximum 7.2 wt% over Fe/ZSM-5. At the same time metal-doping reduces the temperature of catalyst regeneration and catalyzes the oxidation of coke. Overall, this work presents a comparative study between catalyst activity and deactivation during thermochemical conversion of biomass.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jaap.2018.12.005

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Persson, H., Duman, I., Wang, S., Pettersson, L. J., & Yang, W.
Venue
Journal of Analytical and Applied Pyrolysis
Publisher
Elsevier BV
Published
2019-03
Volume
138
Pages
54-61
ISSN
0165-2370 (ISSN-L)
OpenAlex
W2902043344
Cited by
116
References
4
FWCI
3.87
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.