Microwave assisted and conventional pyrolysis of MDF – Characterization of the produced biochars
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Abstract Two different heat treatments for MDF, microwave assisted pyrolysis (MWP) and conventional pyrolysis (CPS), are investigated. The influence of different microwave absorbers (activated carbon (AC) and K2CO3) and different microwave powers in MWP and different temperatures in CPS on the characteristics of biochar is reviewed. Morphology and chemical properties of the obtained biochars are evaluated comparing biochar yield, ultimate analysis, proximate analysis, biochar stability test, FTIR spectroscopy and solid-state 13C CP/MAS NMR spectroscopy. The resulting biochars of both processes are compared to find the best production method. An increasing microwave power without the use of MWA, leads to a higher degree of aromaticity. The addition of increasing amounts of AC at low microwave power (300 W) leads to higher pyrolysis temperatures and more aromatic biochars. At 400 W a more aromatic biochar with a more open surface is achieved compared to 300 W. However, the addition of an increasing amount of AC as a MWA at 400 W induces a lower pyrolysis temperature with increasing biochar yields and decreasing aromaticity. K2CO3 is more effective as a MWA and produces more aromatic biochar at lower microwave power than when using AC. In general MWP yields a biochar with a higher degree of aromaticity at lower temperatures than CPS. Both CPS and MWP are viable options for transforming MDF into a value added biochar.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
An investigation into the reactions of biochar in soil
Joseph, S. D., Camps-Arbestain, M., Lin, Y., Munroe, P., Chia, C. H., Hook, J., van Zwieten, L., Kimber, S., Cowie, A., Singh, B. P., et al. (2010) · Soil Research · doi:10.1071/sr10009 · Cited by 1,111
Characterisation of structure-dependent functional properties of lignin with infrared spectroscopy
Boeriu, C. G., Bravo, D., Gosselink, R. J. A., & van Dam, J. E. G. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.022 · Cited by 1,002 · cited 1×
“In turn, more chemically detailed and quantitative information can be deduced [48,49], which allows”
BackgroundPhysical and chemical characterization of biochars derived from different agricultural residues
Jindo, K., Mizumoto, H., Sawada, Y., Sanchez-Monedero, M. A., & Sonoki, T. (2014) · Biogeosciences · doi:10.5194/bg-11-6613-2014 · Cited by 822
The effect of pyrolysis conditions on biochar stability as determined by three methods
Crombie, K., Mašek, O., Sohi, S. P., Brownsort, P., & Cross, A. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12030 · Cited by 533
Effects of feedstock characteristics on microwave-assisted pyrolysis – A review
Zhang, Y., Chen, P., Liu, S., Peng, P., Min, M., Cheng, Y., Anderson, E., Zhou, N., Fan, L., Liu, C., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.046 · Cited by 260
A method for screening the relative long‐term stability of biochar
Cross, A., & Sohi, S. P. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12035 · Cited by 247 · cited 1×
“% before oxidation (determined by element analysis) [29,30].”
MethodGao, S., Hoffman-Krull, K., Bidwell, A. L., & DeLuca, T. H. (2016) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2016.08.028 · Cited by 141
Pyrolysis of Wood Waste Containing Urea-Formaldehyde and Melamine-Formaldehyde Resins
Girods, P., Dufour, A., Rogaume, Y., Rogaume, C., & Zoulalian, A. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.09.007 · Cited by 78
Girods, P., Dufour, A., Rogaume, Y., Rogaume, C., & Zoulalian, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.003 · Cited by 76
Cited by
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Bandara, T., Franks, A., Xu, J., Bolan, N., Wang, H., & Tang, C. (2020) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2019.1642832 · Cited by 289
Nzediegwu, C., Arshad, M., Ulah, A., Naeth, M. A., & Chang, S. X. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124282 · Cited by 154
Vijayaraghavan, K. (2019) · Environmental Technology Reviews · doi:10.1080/21622515.2019.1631393 · Cited by 146
“[20] compared traditional and microwave-assisted pyrolysis for production of biochar.”
Background
Metadata
- Authors
- Haeldermans, T., Claesen, J., Maggen, J., Carleer, R., Yperman, J., Adriaensens, P., Samyn, P., Vandamme, D., Cuypers, A., Vanreppelen, K., & Schreurs, S.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 138
- Pages
- 218-230
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2907229721
- Cited by
- 102
- References
- 10
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microwave assisted and conventional pyrolysis of MDF – Characterization of the produced biochars. https://app.cochat.ai/papers/10.1016/j.jaap.2018.12.027
- The paper
- Haeldermans, T., Claesen, J., Maggen, J., Carleer, R., Yperman, J., Adriaensens, P., Samyn, P., Vandamme, D., Cuypers, A., Vanreppelen, K., & Schreurs, S. (2019). Microwave assisted and conventional pyrolysis of MDF – Characterization of the produced biochars. Journal of Analytical and Applied Pyrolysis. https://doi.org/10.1016/j.jaap.2018.12.027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.