Effects of idealized joint geometry on finite element predictions of cartilage contact stresses in the hip
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Computational models may have the ability to quantify the relationship between hip morphology, cartilage mechanics and osteoarthritis. Most models have assumed the hip joint to be a perfect ball and socket joint and have neglected deformation at the interface between bone/cartilage. The objective of this study was to analyze finite element (FE) models of hip cartilage mechanics with varying degrees of simplified geometry and a model with a rigid bone material assumption to elucidate the effects on predictions of cartilage stress. A previously validated subject-specific FE model of a cadaveric hip joint was used as the basis for the models. Geometry for the bone/cartilage interface was either: 1) subject-specific (i.e. irregular), 2) spherical, or 3) a rotational conchoid. Cartilage was assigned either a varying (irregular) or constant thickness (smoothed). Loading conditions simulated walking, stair climbing and descending stairs. FE predictions of contact stress for the simplified models were compared with predictions from the subject-specific model. Both spheres and conchoids provided a good approximation of native hip joint geometry (average fitting error ~0.5 mm). However, models with spherical/conchoid bone geometry and smoothed articulating cartilage surfaces grossly underestimated peak and average contact pressures (50% and 25% lower, respectively) and overestimated contact area when compared to the subject-specific FE model. Models incorporating subject-specific bone geometry with smoothed articulating cartilage also underestimated pressures and predicted evenly distributed patterns of contact. The model with rigid bones predicted much higher pressures than the subject-specific model with deformable bones. The results demonstrate that simplifications to the geometry of the bone/cartilage interface, cartilage surface and bone material properties can have a dramatic effect on the predicted magnitude and distribution of cartilage contact pressures in the hip joint.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Etiology of Osteoarthritis of the Hip: An Integrated Mechanical Concept
Ganz, R., Leunig, M., Leunig-Ganz, K., & Harris, W. H. (2008) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-007-0060-z · Cited by 1,620 · cited 2×
“, dysplasia and femoroacetabular impingement) are the underlying cause of hip OA (Cooperman et al., 1983; Harris, 1986; Michaeli et al., 1997; Reynolds et al., 1999; Mavcic et al., 2002; Murphy et al., 2004; Beck et al., 2005; Kim et al., 2006).”
Contact pressures in the human hip joint
Afoke, N., Byers, P., & Hutton, W. (1987) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.69b4.3611154 · Cited by 268
Cited by
Patient-specific analysis of cartilage and labrum mechanics in human hips with acetabular dysplasia
Henak, C. R., Abraham, C. L., Anderson, A. E., Maas, S. A., Ellis, B. J., Peters, C. L., & Weiss, J. A. (2014) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2013.11.003 · Cited by 172
Self-citationNg, K. C. G., Lamontagne, M., Labrosse, M. R., & Beaulé, P. E. (2016) · PLoS ONE · doi:10.1371/journal.pone.0147813 · Cited by 54
“Although the inclusion of a labrum in FEA remains elusive [32], it would be beneficial in future studies to understand the residual physiological effect of the labral seal for this patholog-”
Influential
Metadata
- Authors
- Anderson, A. E., Ellis, B. J., Maas, S. A., & Weiss, J. A.
- Venue
- Journal of Biomechanics
- Publisher
- Elsevier BV
- Published
- 2010-05
- Volume
- 43
- Issue
- 7
- Pages
- 1351-1357
- ISSN
- 0021-9290 (ISSN-L)
- OpenAlex
- W2139151236
- Cited by
- 197
- References
- 2
- FWCI
- 15.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of idealized joint geometry on finite element predictions of cartilage contact stresses in the hip. https://app.cochat.ai/papers/10.1016/j.jbiomech.2010.01.010
- The paper
- Anderson, A. E., Ellis, B. J., Maas, S. A., & Weiss, J. A. (2010). Effects of idealized joint geometry on finite element predictions of cartilage contact stresses in the hip. Journal of Biomechanics. https://doi.org/10.1016/j.jbiomech.2010.01.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.