The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Microwave-assisted pyrolysis with chemical activation, an innovative method to convert orange peel into activated carbon with improved properties as dye adsorbent
Open accessAbstract
Abstract Microwave-assisted pyrolysis with chemical activation was developed and optimized to transform orange peel into activated carbon (AC) desirable for use as a dye adsorbent. The orange peel was first carbonized via microwave-assisted pyrolysis to produce a biochar, which was then activated and converted into AC via chemical impregnation coupled with microwave-assisted pyrolysis. The process parameters involved was optimized to maximize the yield of AC and its adsorption efficiency on malachite green dye using response surface methodology adopting central composite design. The use of microwave-assisted pyrolysis provided a fast heating rate and short process time in converting orange peel into AC, recording a heating rate of up to 112 °C/min in a process taking about 25 min, representing a method that is potentially faster and more energy efficient compared to that shown by the method commonly performed using conventional heating source (≥1 h). The results showed that AC with the highest yield (87 wt% of biochar) and optimal adsorption efficiency (28.5 mg of dye/g of AC) can be obtained by performing chemical impregnation at an impregnation ratio of 1:1 coupled with microwave-assisted pyrolysis under microwave irradiation (heating) for 5 min using 550 W of microwave power. The addition of chemical activation with alkali metal hydroxides resulted in the production of AC with improved properties. The AC showed a highly porous structure containing high content of fixed carbon (83 wt%) and high BET surface area (1350 m2/g). The adsorption–desorption isotherm showed a combination of Type I and Type II isotherms, which indicates the presence of microporous-mesoporous structure, thus exhibiting a characteristic of improved pores accessibility and high adsorption capacity. Combined with the detection of low ash (3.2 wt%) and moisture content (5 wt%), the AC shows great promise as a high-grade dye adsorbent with high adsorption capacity and potentially increased durability since a low moisture content could increase the rate of adsorption of dye contaminants and a high ash content could promote undesirable catalytic reactions and reduce the adsorption capacity and reactivation efficiency of AC. The recovery of AC with improved properties and the desirable process features (fast heating rate, short process time) suggest the great potential of this method as an alternative for the treatment and recovery of fruit peel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
An overview of the modification methods of activated carbon for its water treatment applications
Bhatnagar, A., Hogland, W., Marques, M., & Sillanpää, M. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.038 · Cited by 1,212
Raymundo-Piñero, E., Azaïs, P., Cacciaguerra, T., Cazorla-Amorós, D., Linares-Solano, A., & Béguin, F. (2005) · Carbon · doi:10.1016/j.carbon.2004.11.005 · Cited by 860
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
The impact of landfilling and composting on greenhouse gas emissions – A review
Lou, X. F., & Nair, J. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.12.006 · Cited by 482
Adsorption of copper(II) from aqueous solutions on activated carbon prepared from grape bagasse
Demiral, H., & Güngör, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.084 · Cited by 460
Preparation and characterization of activated carbon from waste biomass
Tay, T., Ucar, S., & Karagöz, S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.011 · Cited by 446 · cited 4×
“long process time (1 – 7 hours) (Baccar et al., 2009; Dural et al., 2011; Tay et al., 2009) and high process temperature (up to 700 C) (Ahmad and Alrozi, 2010; Garba and Rahim, 2014), resulting in high energy usage and increased production cost.”
BackgroundMethodInfluentialBaccar, R., Bouzid, J., Feki, M., & Montiel, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.041 · Cited by 427
Sayğılı, H., & Güzel, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.055 · Cited by 400
Boukroufa, M., Boutekedjiret, C., Petigny, L., Rakotomanomana, N., & Chemat, F. (2015) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2014.11.015 · Cited by 392
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Biochar technology in wastewater treatment: A critical review
Xiang, W., Zhang, X., Chen, J., Zou, W., He, F., Hu, X., Tsang, D. C. W., Ok, Y. S., & Gao, B. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126539 · Cited by 884
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Self-citationA comprehensive review on physical activation of biochar for energy and environmental applications
Sajjadi, B., Chen, W.-Y., & Egiebor, N. O. (2019) · Reviews in Chemical Engineering · doi:10.1515/revce-2017-0113 · Cited by 475
Liew, R. K., Nam, W. L., Chong, M. Y., Phang, X. Y., Su, M. H., Yek, P. N. Y., Ma, N. L., Cheng, C. K., Chong, C. T., & Lam, S. S. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.10.005 · Cited by 315
Self-citation
Metadata
- Authors
- Lam, S. S., Liew, R. K., Wong, Y. M., Yek, P. N. Y., Ma, N. L., Lee, C. L., & Chase, H. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 162
- Pages
- 1376-1387
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2626551812
- Cited by
- 294
- References
- 55
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microwave-assisted pyrolysis with chemical activation, an innovative method to convert orange peel into activated carbon with improved properties as dye adsorbent. https://app.cochat.ai/papers/10.1016/j.jclepro.2017.06.131
- The paper
- Lam, S. S., Liew, R. K., Wong, Y. M., Yek, P. N. Y., Ma, N. L., Lee, C. L., & Chase, H. A. (2017). Microwave-assisted pyrolysis with chemical activation, an innovative method to convert orange peel into activated carbon with improved properties as dye adsorbent. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2017.06.131
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.