The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Microwave-assisted pyrolysis with chemical activation, an innovative method to convert orange peel into activated carbon with improved properties as dye adsorbent
Open accessAbstract
Abstract Microwave-assisted pyrolysis with chemical activation was developed and optimized to transform orange peel into activated carbon (AC) desirable for use as a dye adsorbent. The orange peel was first carbonized via microwave-assisted pyrolysis to produce a biochar, which was then activated and converted into AC via chemical impregnation coupled with microwave-assisted pyrolysis. The process parameters involved was optimized to maximize the yield of AC and its adsorption efficiency on malachite green dye using response surface methodology adopting central composite design. The use of microwave-assisted pyrolysis provided a fast heating rate and short process time in converting orange peel into AC, recording a heating rate of up to 112 °C/min in a process taking about 25 min, representing a method that is potentially faster and more energy efficient compared to that shown by the method commonly performed using conventional heating source (≥1 h). The results showed that AC with the highest yield (87 wt% of biochar) and optimal adsorption efficiency (28.5 mg of dye/g of AC) can be obtained by performing chemical impregnation at an impregnation ratio of 1:1 coupled with microwave-assisted pyrolysis under microwave irradiation (heating) for 5 min using 550 W of microwave power. The addition of chemical activation with alkali metal hydroxides resulted in the production of AC with improved properties. The AC showed a highly porous structure containing high content of fixed carbon (83 wt%) and high BET surface area (1350 m2/g). The adsorption–desorption isotherm showed a combination of Type I and Type II isotherms, which indicates the presence of microporous-mesoporous structure, thus exhibiting a characteristic of improved pores accessibility and high adsorption capacity. Combined with the detection of low ash (3.2 wt%) and moisture content (5 wt%), the AC shows great promise as a high-grade dye adsorbent with high adsorption capacity and potentially increased durability since a low moisture content could increase the rate of adsorption of dye contaminants and a high ash content could promote undesirable catalytic reactions and reduce the adsorption capacity and reactivation efficiency of AC. The recovery of AC with improved properties and the desirable process features (fast heating rate, short process time) suggest the great potential of this method as an alternative for the treatment and recovery of fruit peel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
An overview of the modification methods of activated carbon for its water treatment applications
Bhatnagar, A., Hogland, W., Marques, M., & Sillanpää, M. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.038 · Cited by 1,212
Raymundo-Piñero, E., Azaïs, P., Cacciaguerra, T., Cazorla-Amorós, D., Linares-Solano, A., & Béguin, F. (2005) · Carbon · doi:10.1016/j.carbon.2004.11.005 · Cited by 860
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
The impact of landfilling and composting on greenhouse gas emissions – A review
Lou, X. F., & Nair, J. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.12.006 · Cited by 482
Adsorption of copper(II) from aqueous solutions on activated carbon prepared from grape bagasse
Demiral, H., & Güngör, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.084 · Cited by 460
Preparation and characterization of activated carbon from waste biomass
Tay, T., Ucar, S., & Karagöz, S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.011 · Cited by 446 · cited 4×
“long process time (1 – 7 hours) (Baccar et al., 2009; Dural et al., 2011; Tay et al., 2009) and high process temperature (up to 700 C) (Ahmad and Alrozi, 2010; Garba and Rahim, 2014), resulting in high energy usage and increased production cost.”
BackgroundMethodInfluentialBaccar, R., Bouzid, J., Feki, M., & Montiel, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.041 · Cited by 427
Sayğılı, H., & Güzel, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.055 · Cited by 400
Boukroufa, M., Boutekedjiret, C., Petigny, L., Rakotomanomana, N., & Chemat, F. (2015) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2014.11.015 · Cited by 392
Dural, M. U., Cavas, L., Papageorgiou, S. K., & Katsaros, F. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.038 · Cited by 362
Progress in waste oil to sustainable energy, with emphasis on pyrolysis techniques
Lam, S. S., Liew, R. K., Jusoh, A., Chong, C. T., Ani, F. N., & Chase, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.005 · Cited by 355
Self-citationNjoku, V. O., Foo, K. Y., Asif, M., & Hameed, B. H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.115 · Cited by 326
Williams, P. T., & Reed, A. R. (2006) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2005.11.006 · Cited by 303
Activated carbon derived from rice husk by NaOH activation and its application in supercapacitor
Le Van, K., & Luong Thi, T. T. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.05.012 · Cited by 299
Auta, M., & Hameed, B. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.09.100 · Cited by 258
Preparation and characterization of activated carbon from pineapple waste biomass for dye removal
Mahamad, M. N., Zaini, M. A. A., & Zakaria, Z. A. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.03.009 · Cited by 256
Sayğılı, H., Güzel, F., & Önal, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.01.009 · Cited by 233
Production and characterization of granular activated carbon from activated sludge
Al-Qodah, Z., & Shawabkah, R. (2009) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322009000100012 · Cited by 228
Ahmad, M. A., & Alrozi, R. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.049 · Cited by 226
Evidence of self-gasification during the microwave-induced pyrolysis of coffee hulls
Menéndez, J. A., Domínguez, A., Fernández, Y., & Pis, J. J. (2007) · Energy & Fuels · doi:10.1021/ef060331i · Cited by 210
Microwave pyrolysis of sewage sludge: analysis of the gas fraction
Menéndez, J. A., Domı́nguez, A., Inguanzo, M., & Pis, J. J. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.09.003 · Cited by 209
Foo, K. Y., & Hameed, B. H. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.002 · Cited by 209
Catalytic microwave pyrolysis of waste engine oil using metallic pyrolysis char
Lam, S. S., Liew, R. K., Cheng, C. K., & Chase, H. A. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.04.014 · Cited by 208
Self-citationFruit waste as feedstock for recovery by pyrolysis technique
Lam, S. S., Liew, R. K., Lim, X. Y., Ani, F. N., & Jusoh, A. (2016) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.02.021 · Cited by 206
Self-citationJin, H., Wang, X., Gu, Z., & Polin, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.088 · Cited by 190
Mahapatra, K., Ramteke, D. S., & Paliwal, L. J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.01.009 · Cited by 184
Biotechnology of Lignocellulose: Theory and Practice
Chen, H. (2014) · Thammasat University Digital Collections · doi:10.1007/978-94-007-6898-7 · Cited by 172
The Effects of Reaction Temperature and Time and Particle Size of Corn Stover on Microwave Pyrolysis
Lei, H., Ren, S., & Julson, J. (2009) · Energy & Fuels · doi:10.1021/ef9000264 · Cited by 167
Pezoti, O., Cazetta, A. L., Gomes, R. C., Barizão, É. O., Souza, I. P. A. F., Martins, A. C., Asefa, T., & Almeida, V. C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.015 · Cited by 155
Lam, S. S., Mahari, W. A. W., Cheng, C. K., Omar, R., Chong, C. T., & Chase, H. A. (2016) · Energy · doi:10.1016/j.energy.2016.09.076 · Cited by 151
Self-citationLam, S. S., Mahari, W. A. W., Jusoh, A., Chong, C. T., Lee, C. L., & Chase, H. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.085 · Cited by 151
Self-citationGhaedi, M., Azad, F. N., Dashtian, K., Hajati, S., Goudarzi, A., & Soylak, M. (2016) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2016.05.025 · Cited by 149
Selvaraju, G., & Bakar, N. K. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.056 · Cited by 147
Influence of temperature and particle size on the fixed bed pyrolysis of orange peel residues
Trujillo, L. A., Márquez-Montesinos, F., Gonzalo, A., Sánchez, J. L., & Arauzo, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.06.009 · Cited by 136
Microwave-assisted pyrolysis of HDPE using an activated carbon bed
Russell, A. D., Antreou, E. I., Lam, S. S., Ludlow-Palafox, C., & Chase, H. A. (2012) · RSC Advances · doi:10.1039/c2ra20859h · Cited by 132
Self-citationJamaluddin, M. ‘., Ismail, K., Ishak, M. A. M., Ghani, Z. A., Abdullah, M. F., Safian, M. T.-U., Idris, S. S., Tahiruddin, S., Yunus, M., & Hakimi, N. I. N. M. (2013) · Renewable Energy · doi:10.1016/j.renene.2012.12.042 · Cited by 119
Activated Carbon for Catalyst Support from Microwave Pyrolysis of Orange Peel
Lam, S. S., Liew, R. K., Wong, Y. M., Azwar, E., Jusoh, A., & Wahi, R. B. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9804-x · Cited by 108
Self-citationDuan, X., Srinivasakannan, C., Peng, J., Zhang, L., & Zheng-yong, Z. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.09.033 · Cited by 107
Kundu, A., Gupta, B. S., Hashim, M. A., & Redzwan, G. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.06.093 · Cited by 103
Azuara, M., Kersten, S. R. A., & Kootstra, A. M. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.010 · Cited by 99
Pyrolysis Recovery of Waste Shipping Oil Using Microwave Heating
Mahari, W. A. W., Zainuddin, N. A., Nik, W. B. W., Chong, C. T., & Lam, S. S. (2016) · Energies · doi:10.3390/en9100780 · Cited by 85
Self-citationGiraldo, L., & Moreno‐Piraján, J. C. (2012) · Journal of Chemistry · doi:10.1155/2012/120763 · Cited by 81
Nekouei, F., Kargarzadeh, H., Nekouei, S., Tyagi, I., Agarwal, S., & Gupta, V. K. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.02.011 · Cited by 74
Huang, Y., Hou, C., Hsi, H., & Wu, J. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.12.019 · Cited by 57
Meryemoğlu, B., Irmak, S., & Hasanoğlu, A. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.05.040 · Cited by 39
Optimisation of the process variables in production of activated carbon by microwave heating
Kundu, A., Gupta, B. S., Hashim, M. A., Sahu, J. N., Mubarak, N. M., & Redzwan, G. (2015) · RSC Advances · doi:10.1039/c4ra16900j · Cited by 38
Nasri, N. S., Jibril, M., Zaini, M. A. A., Mohsin, R., Hamza, U. D., & Musa, A. M. (2014) · Jurnal Teknologi · doi:10.11113/jt.v67.2787 · Cited by 24
Understanding Pore Formation and Structural Deformation in Carbon Spheres During KOH Activation
Musa, M. S., Sanagi, M. M., Nur, H., & Ibrahim, W. A. W. (2015) · Sains Malaysiana · doi:10.17576/jsm-2015-4404-17 · Cited by 20
Mohammed, J., Nasri, N. S., Zaini, M. A. A., Hamza, U. D., Zain, H. M., & Ani, F. N. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1029010 · Cited by 19
Chowdhury, Z. Z. (2011) · Scientific Research and Essays · doi:10.5897/sre11.1436 · Cited by 17
K, K. A., Gimba, C. E., Kagbu, J. A., et al. (2010) · Archives of applied science research · Cited by 15
Synthesis and Characterization of Bio-Based Porous Carbons by Two Step Physical Activation with CO2
Nasri, N. S., Zaini, M. A. A., Mohsin, R., Hamza, U. D., & Musa, A. M. (2014) · Jurnal Teknologi · doi:10.11113/jt.v68.3022 · Cited by 11
Press, M., Gimba, C. E., Salihu, A. A., Kagbu, J. A., Turoti, M., Itodo, A. U., & State, K. (2010) · Cited by 11
Hassan, L. G., Itodo, A. U., & Umar, U. B. (2010) · Cited by 7
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Biochar technology in wastewater treatment: A critical review
Xiang, W., Zhang, X., Chen, J., Zou, W., He, F., Hu, X., Tsang, D. C. W., Ok, Y. S., & Gao, B. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126539 · Cited by 884
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Self-citationSynthesis Strategies of Porous Carbon for Supercapacitor Applications
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2020) · Small Methods · doi:10.1002/smtd.201900853 · Cited by 671
A comprehensive review on physical activation of biochar for energy and environmental applications
Sajjadi, B., Chen, W.-Y., & Egiebor, N. O. (2019) · Reviews in Chemical Engineering · doi:10.1515/revce-2017-0113 · Cited by 475
Metadata
- Authors
- Lam, S. S., Liew, R. K., Wong, Y. M., Yek, P. N. Y., Ma, N. L., Lee, C. L., & Chase, H. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 162
- Pages
- 1376-1387
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2626551812
- Cited by
- 294
- References
- 55
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.