The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar
Open accessAbstract
Alkali-activated materials (AAMs) are one of the alternative low-CO 2 binders. One-part AAMs, (that is, mixing a solid precursor with a solid alkali activator and adding water) have recently attracted increasing interest. The purpose of this study is to examine if fast-dissolving solid synthetic sodium metasilicate could be replaced by a combination of sodium hydroxide and slow-dissolving silica derived from rice husk ash or microsilica in the preparation of one-part alkali-activated blast furnace slag mortar. The replacement would improve the carbon footprint and the cost efficiency of the binder. The results demonstrate that silica availability significantly affects compressive strength development as a function of time or mixture composition. The highest compressive strength (107 MPa, 28 d) was obtained with fast-dissolving silica. Furthermore, setting times could be adjusted based on the mix composition, and the durability of mortar remained good after 120 freeze–thaw cycles. The results highlight the overall effect of silica availability on the fresh and hardened properties of one-part AAMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
318-19 Building Code Requirements for Structural Concrete and Commentary
(2019) · American Concrete Institute eBooks · doi:10.14359/51716937 · Cited by 1,289
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Kumar, S., Kumar, R., & Mehrotra, S. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3934-5 · Cited by 807
Evolution of binder structure in sodium silicate-activated slag-metakaolin blends
Bernal, S. A., Provis, J. L., Rose, V., & Mejía de Gutierrez, R. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.09.004 · Cited by 786
Rice husk ash as an alternate source for active silica production
Della, V. P., Kühn, I., & Hotza, D. (2002) · Materials Letters · doi:10.1016/s0167-577x(02)00879-0 · Cited by 656
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
Puligilla, S., & Mondal, P. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.004 · Cited by 593
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Silica fume and waste glass in cement concrete production: A review
Mehta, A., & Ashish, D. K. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100888 · Cited by 438
Wang, R., Hu, Z., Li, Y., Wang, K., & Zhang, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126371 · Cited by 410
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Panda, B., Singh, G. B., Unluer, C., & Tan, M. J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.185 · Cited by 254
Metadata
- Authors
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 187
- Pages
- 171-179
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2793427184
- Cited by
- 261
- References
- 48
- FWCI
- 19.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar. https://app.cochat.ai/papers/10.1016/j.jclepro.2018.03.202
- The paper
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018). Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.202
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.