Repurposing end of life notebook computers from consumer WEEE as thin client computers – A hybrid end of life strategy for the Circular Economy in electronics
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
This paper presents an investigation into the feasibility of repurposing end-of-life notebook computers as thin client computers. Repurposing is the identification of a new use for a product that can no longer be used in its original form and has the potential to become a hybrid re-use/recycling end-of-life strategy for suitable e-waste when direct reuse is not economically or technically feasible. In this instance, it was targeted to produce thin client computers using motherboards, processors and memory from used laptops while recycling all other components. Notebook computers are of interest for this type of strategy due to having a substantial environmental impact in manufacturing but often not having the option of direct reuse as they are prone to damage and experience a rapid loss of value over time. They also contain multiple critical raw materials with very low recycling rates. The notebook computers were sourced from Civic Amenity sites (CA) and originated from business-to-consumer (B2C) channels. A total of 246 notebook computers were collected and analysed. The paper outlines a methodology developed to identify, test, analyse, and disassemble suitable devices for repurposing. The methodology consists of the following stages with associated pass rates; Visual Inspection & Power-on Test (32%) the Initial-stage functionality test comprised of Functionality Test (56%), Diagnostics (100%) and Benchmarking (86%). The Disassembly stage had a pass rate of 100% and the Post-Disassembly Test comprised of a Validation test (86%). The Final-stage functionality test had a pass rate of 61%. The overall results show that 9% of the notebook computers were suitable for repurposing as thin client computers. It recommends the following design changes to notebooks/laptops that would support repurposing; 1) PCB mounted Fan and Heatsink assembly, 2) Eliminate daughter and I/O boards, 3) A separate Power Button assembly, 4) Reduction in size of the motherboards surface area or physical size. These design changes would allow for a more efficient transition for a change of role. A streamlined lifecycle analysis based on Cumulative Energy Demand (CED) was undertaken to compare the impact of repurposed notebook computers with new thin client computers. The results indicated that there are significant potential savings to be made by extending lifetimes and offsetting the production of new thin client computers under a range of assumptions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stahel, W. R. (2016) · Nature · doi:10.1038/531435a · Cited by 2,555
The Circular Economy: A New Development Strategy in China
Yuan, Z., Bi, J., & Moriguichi, Y. (2006) · Journal of Industrial Ecology · doi:10.1162/108819806775545321 · Cited by 1,175
Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms
den Hollander, M. C., Bakker, C. A., & Hultink, E. J. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12610 · Cited by 736
Novel approach to recover cobalt and lithium from spent lithium-ion battery using oxalic acid
Zeng, X., Li, J., & Shen, B. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.02.064 · Cited by 571
The Environmental Impacts of Reuse: A Review
Cooper, D. R., & Gutowski, T. G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12388 · Cited by 337
Remanufacturing and Energy Savings
Gutowski, T. G., Sahni, S., Boustani, A., & Graves, S. C. (2011) · Environmental Science & Technology · doi:10.1021/es102598b · Cited by 260
An Analysis of the Eco‐Efficiency of Remanufactured Personal Computers and Mobile Phones
Quariguasi‐Frota‐Neto, J., & Bloemhof, J. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01234.x · Cited by 107
What Do We Know About Metal Recycling Rates?
Graedel, T. E., Allwood, J., Birat, J.-P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00342.x · Cited by 43 · cited 3×
“Chapter 2 - Literature Review 35 WEEE collection is beset by issues such as illegal exportation (Widmer et al., 2005), recycling through non-compliant channels also known as informal recycling (Stevels et al., 2013) and consumer reluctance to send products for disposal (Graedel, 2011).”
Background
Cited by
Circular supply chain management: a definition and structured literature review
Farooque, M., Zhang, A., Thürer, M., Qu, T., & Huisingh, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.303 · Cited by 894
Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., et al. (2019) · Environmental Research Letters · doi:10.1088/1748-9326/ab0fe3 · Cited by 477
Circular economy business models and operations management
Lopes de Sousa Jabbour, A. B., Rojas Luiz, J. V., Rojas Luiz, O., Jabbour, C. J. C., Ndubisi, N. O., Caldeira de Oliveira, J. H., & Junior, F. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.349 · Cited by 330
A literature review on circular economy adoption in the manufacturing sector
Acerbi, F., & Taisch, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123086 · Cited by 276
Parajuly, K., Fitzpatrick, C., Muldoon, O., & Kuehr, R. (2020) · Resources, Conservation & Recycling: X · doi:10.1016/j.rcrx.2020.100035 · Cited by 260
Self-citation
Metadata
- Authors
- Coughlan, D., Fitzpatrick, C., & McMahon, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 192
- Pages
- 809-820
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2802711238
- Cited by
- 79
- References
- 8
- FWCI
- 5.91
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.