The DOI matches its Crossref record; 199 of the 199 references it cites were found in a registry or an index; 18 of the 239 sources its claims cite were checked for support.
Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review
Open accessAbstract
As one quarter of global energy use serves the production of materials, the more efficient use of these materials presents a significant opportunity for the mitigation of greenhouse gas (GHG) emissions. With the renewed interest of policy makers in the circular economy, material efficiency (ME) strategies such as light-weighting and downsizing of and lifetime extension for products, reuse and recycling of materials, and appropriate material choice are being promoted. Yet, the emissions savings from ME remain poorly understood, owing in part to the multitude of material uses and diversity of circumstances and in part to a lack of analytical effort. We have reviewed emissions reductions from ME strategies applied to buildings, cars, and electronics. We find that there can be a systematic trade-off between material use in the production of buildings, vehicles, and appliances and energy use in their operation, requiring a careful life cycle assessment of ME strategies. We find that the largest potential emission reductions quantified in the literature result from more intensive use of and lifetime extension for buildings and the light-weighting and reduced size of vehicles. Replacing metals and concrete with timber in construction can result in significant GHG benefits, but trade-offs and limitations to the potential supply of timber need to be recognized. Repair and remanufacturing of products can also result in emission reductions, which have been quantified only on a case-by-case basis and are difficult to generalize. The recovery of steel, aluminum, and copper from building demolition waste and the end-of-life vehicles and appliances already results in the recycling of base metals, which achieves significant emission reductions. Higher collection rates, sorting efficiencies, and the alloy-specific sorting of metals to preserve the function of alloying elements while avoiding the contamination of base metals are important steps to further reduce emissions.
Overview
CoChat Summary
TL;DR
This review synthesizes material efficiency (ME) strategies for reducing greenhouse gas emissions from buildings, vehicles, and electronics, finding the largest quantified reductions from more intensive use and lifetime extension of buildings and light-weighting/downsizing of vehicles. It highlights systematic trade-offs between material production and operational energy use, and concludes that evidence for additional ME-driven GHG reductions in electronics is limited.
Key findings
- Material production caused 11.4 Gt CO₂-equivalent cradle-to-gate emissions in 2015; iron and steel contributed 32%, cement/lime/plaster 26%, rubber/plastics 13%, and other non-metallic minerals 13%.
- The largest quantified emission reductions in the reviewed literature come from more intensive use and lifetime extension of buildings and light-weighting/reduced size of vehicles; examples include building more intensive use ↓40% [16], building lifetime extension ↓47% [16] or ↓40% [66], vehicle more intensive use ↓39% steel fleet [16] and ↓93%–96% vehicle [149], and vehicle light-weighting ↓5%–45% steel [16,207].
- Replacing steel and concrete with timber can yield significant GHG benefits, but trade-offs and limited timber supply must be recognized; one Swiss study reports a median life cycle benefit of 25% for wood constructions due exclusively to material production, with increased heating/cooling energy from loss of thermal mass.
- Recycling of base metals from buildings, end-of-life vehicles, and appliances already achieves significant emission reductions; for electronics, quantified GHG benefit from recycling ranges from 1% to 10% of life cycle emissions, and the review finds minimal scope for additional ME-driven GHG reductions in EEE.
Methods
- The paper is a literature review of ME strategies applied to buildings, cars, and electrical and electronic equipment (EEE), addressing what strategies exist, their potential GHG reductions, and important gaps.
- It draws on existing case studies, scenario analyses, and modeling studies, including EXIOBASE-based estimates of material production emissions and IEA projections.
- Table 3 evaluates the state of evidence using IPCC-like scoring: availability of evidence (limited, medium, robust) and level of agreement (low, medium, high), based on reviewed case studies and expert judgment.
Limitations
- The paper states that emissions savings from ME remain poorly understood due to the multitude of material uses, diversity of circumstances, and lack of analytical effort; there are few up-scaling/scenario studies and very few ex-post studies.
- The paper states that studies often focus on highly developed countries or China, with a lack of information from other regions, and that the global potential emission reductions from materials are still poorly characterized.
- The paper states that integrated assessment models are poorly equipped to analyze ME options due to lack of data on technology performance, costs, markets, barriers, intersectoral life cycle effects, and material-containing product stocks; behavioral responses and rebound effects remain open questions. Evident from the text: many strategies are quantified only case-by-case and are difficult to generalize, and system boundary choices vary across studies.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
13 Valid · 9 Not valid · 142 Not checked · 81 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Second, displaced materials such as cement and steel have high emissions during production [76].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Lightweight design and material choice
What the sources say
- Supportedcites [76] source
The Introduction describes steel and concrete as substitutes for wood that use more energy in manufacture and therefore cause more fossil-fuel consumption and CO₂ emissions. The Results likewise identify emissions savings from avoiding the fossil fuels needed to manufacture steel or concrete. The paper discusses concrete rather than cement by name, but this supports the citing sentence’s point about high production emissions from displaced materials. (LLM, conf=0.92)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In Switzerland, a continued growth of floor area by 20% until 2050 would lead to an increase in cumulated material-related GHG emissions of 8% compared to a baseline scenario [44].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > More intensive use
What the sources say
- Partly supportedcites [44] sourceExperimental — accuracy not yet measured
Our copy does carry the 8% figure in the scenario-results section (i n press, adjacent to Table 1 / Figure 5): 'Total cumulated emissions in 2055 are 8% higher for...' — but the sentence is cut off in our copy, so the comparator scenario is not fully stated there. Two qualifiers diverge from the claim: the source's 20% is not growth of total floor area but scenario 2 'Floor area', in which new constructions from 2015 are built with 20% larger floor space per person (59 and 62 m2/capita instead of 49 and 52), relative to a 'Base' scenario with constant per-capita floor area; and the cumulated-emissions comparison is reported for 2055, not 2050 (the simulation runs 2015-2055). The material-related GHG metric itself is supported (Figure 5: cumulated GHG emissions 2015-2055 for production and disposal of construction material; Abstract: 'An increase per capita floor area or material turnover will lead to a considerable increase in impacts'), but the scope is Swiss residential buildings, not Switzerland's building stock generally. (LLM, conf=0.70)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“There is a renewed interest in the enhanced carbonation of concrete, a process by which CO 2 is absorbed from the atmosphere [73,102,109].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Issues of alloy-specific recycling are further discussed in the section on vehicle recycling.
What the sources say
- Not checked yetcites [73] source
- Not checked yetcites [102] source
- Could not verifycites [109] sourceExperimental — accuracy not yet measured
The Discussion reports that recycling concrete could reduce buildings’ greenhouse-gas emissions, but does not describe CO2 absorption from the atmosphere. Searches for concrete carbonation and enhanced carbonation found no passage addressing the process or renewed interest in it. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Materials constituted 55% of the carbon footprint of vehicle and transport equipment manufacturing of 1.6 Gt [27,42,119].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > ME in vehicles
What the sources say
- Not checked yetcites [27] Hertwich E G, 2019
- Partly supportedcites [42] Hertwich E G, 2018, Environ. Res. Lett. sourceExperimental — accuracy not yet measured
The section 'More insight by disaggregating industry' (p. 8) says materials were the largest contributor to emissions embodied in manufactured products. It does not give a 55% share or a 1.6 Gt footprint for vehicle and transport equipment manufacturing; Table 3 (p. 9) uses broader sector categories. (LLM, conf=0.84)
- Could not verifycites [119] sourceExperimental — accuracy not yet measured
The Emission Accounts section (p. 6) describes how emissions are allocated to EXIOBASE industries and products, but does not give a carbon footprint for vehicle and transport equipment manufacturing. Searches for “55%,” “1.6 Gt,” and “transport equipment” found no passage establishing the claimed materials share or total. (LLM, conf=0.72)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“For gasoline-driven vehicles, this type of light-weighting results in a reduction of life cycle emissions due to the reduction in operational energy use and despite the increased energy requirement for material production [151][152][153].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Lifetime extension
What the sources say
- Not checked yetcites [151] source
- Not checked yetcites [152] source
- Supportedcites [153] source
The Introduction says that light-weighting reduces fuel consumption but often raises emissions from materials production. Section 3.1 reports net GHG-emissions savings for the modeled light-weighting scenarios; the paper includes gasoline vehicles among its modeled drive technologies. Together, these passages support the claimed trade-off, though the reported savings are scenario-based rather than a guarantee for every vehicle. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
116 more claims · 3 with their cited sources checked
Create a free account to see all 245 claims and to verify the 221 references still open.
- Probably not a substantial claim. 43
- It may state two separate claims as one. 98
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“On the other hand, shared mobility can lead to higher utilization of each vehicle, which means a more efficient use of materials [341].”
From Tackling climate change with machine learning (2023) · cites this paper as [341]
In the citing paper
“AM (3-D printing) can produce lighter parts in vehicles, such as road vehicles and aircraft, that reduce energy consumption [341,407].”
From Tackling climate change with machine learning (2023) · cites this paper as [341]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > The state of evidence Evaluation of ME strategies
“For light-weighting of buildings, there is also limited evidence but a strong agreement about a substantial potential for emission reductions in the construction phase with few trade-offs.”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Conclusions
“| | Light-weight design | ↓19 [16]-50% [71] | -↑ | ↓ - | MH | ◊ Conventions, labor costs |”
Citations
Cites
Change, I. P. O. C. (2015) · Cambridge University Press eBooks · doi:10.1017/cbo9781107415416 · Cited by 4,693
E-waste: An assessment of global production and environmental impacts
Robinson, B. H. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.09.044 · Cited by 1,777
Comparative Environmental Life Cycle Assessment of Conventional and Electric Vehicles
Hawkins, T. R., Singh, B., Majeau‐Bettez, G., & Strømman, A. H. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00532.x · Cited by 1,670
Climate change 2014 : mitigation of climate change
Edenhofer, O., Pichs-Madruga, R., & Sokona, Y. (2014) · University of North Texas Digital Library (University of North Texas) · Cited by 1,637
Monteiro, P. J. M., Miller, S. A., & Horvath, A. (2017) · Nature Materials · doi:10.1038/nmat4930 · Cited by 1,454
Life cycle energy analysis of buildings: An overview
Ramesh, T., Prakash, R., & Shukla, K. K. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.007 · Cited by 1,408
Energy use in the life cycle of conventional and low-energy buildings: A review article
Sartori, I., & Hestnes, A. G. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2006.07.001 · Cited by 1,284
Zink, T., & Geyer, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12545 · Cited by 1,210
(2010) · Encyclopedia of Geography · doi:10.4135/9781412939591.n1196 · Cited by 1,191
Grubler, A., Wilson, C., Bento, N., Boza-Kiss, B., Krey, V., McCollum, D. L., Rao, N. D., Riahi, K., Rogelj, J., De Stercke, S., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0172-6 · Cited by 1,178
Research works printed but not linked: 8
- Hashimoto S H, 2013, Glob. Environ. Res., 17, 39
- G7. Communiqué, 2017, G7 Bologna Environment Ministers’ Meeting
- 10.1098/rsta.2012.0496 · DOI · Paper page
- IEA, 2016, Energy Technology Perspectives 2016, 27
- Anas A, 1998, J. Econ. Lit., 36, 1426
- Swilling M, 2018, The Weight of Cities: Resource Requirements of Future Urbanization; International Resource Panel
- Smith P ed Edenhofer O, 2014, Climate Change 2014: Mitigation of Climate Change
- Nasr N Z, 2018, Repair Direct Reuse
Cited by
A review of trends and drivers of greenhouse gas emissions by sector from 1990 to 2018
Lamb, W. F., Wiedmann, T., Pongratz, J., Andrew, R., Crippa, M., Olivier, J. G. J., Wiedenhofer, D., Mattioli, G., Khourdajie, A. A., House, J., et al. (2021) · Environmental Research Letters · doi:10.1088/1748-9326/abee4e · Cited by 1,183
Rissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
Self-citationDemand-side solutions to climate change mitigation consistent with high levels of well-being
Creutzig, F., Niamir, L., Bai, X., Callaghan, M., Cullen, J., Díaz-José, J., Figueroa, M., Grubler, A., Lamb, W. F., Leip, A., et al. (2022) · Nature Climate Change · doi:10.1038/s41558-021-01219-y · Cited by 579
Self-citationThe Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Zhong, X., Hu, M., Deetman, S., Steubing, B., Lin, H. X., Hernandez, G. A., Harpprecht, C., Zhang, C., Tukker, A., & Behrens, P. (2021) · Nature Communications · doi:10.1038/s41467-021-26212-z · Cited by 449
Metadata
- Authors
- Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., & Wolfram, P.
- Affiliations
- Yale University (US)
- University of Delaware (US)
- University of Bologna (IT)
- Reichman University (IL)
- Northwestern University (US)
- Massachusetts Institute of Technology (US)
- University of Freiburg (DE)
- ORCID
- Venue
- Environmental Research Letters
- Publisher
- IOP Publishing
- Published
- 2019-04-16
- Volume
- 14
- Issue
- 4
- Pages
- 043004
- ISSN
- 1748-9326 (ISSN-L)
- OpenAlex
- W2921283133
- Cited by
- 477
- References
- 199
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 88 · 2023: 72 · 2022: 70 · 2021: 66 · 2020: 38 · 2019: 4
- FWCI
- 18.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- creativecommons.org/licenses/by/3.0/ (vor)
- Locations
- Environmental Research Letters (publishedVersion, cc-by)
- Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
- INFM-OAR (INFN Catania) (submittedVersion, cc-by)
- Funders
- United Nations Environment
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
- Physical Sciences › Engineering › Building and Construction › Sustainable Design and Development
- Keywords
- material efficiency, greenhouse gas emissions, circular economy, buildings, vehicles, electronics, lightweight design, service life extension, material reuse and recycling, metal recovery, demolition waste, end-of-life vehicles, appliance recycling, metal sorting, life cycle assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review. https://app.cochat.ai/papers/10.1088/1748-9326/ab0fe3
- The paper
- Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., & Wolfram, P. (2019). Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review. Environmental Research Letters. https://doi.org/10.1088/1748-9326/ab0fe3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.