The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag
Abstract
The use of local aluminosilicates to serve the local engineering applications could resolve the issue of unpredicted properties of the geopolymer caused by the wide variance in aluminosilicates reactivity. The locally available aluminosilicate byproducts (e.g., fly ash [FA] and granulated ground blast-furnace slag [GGBS]) in Qingdao were used to synthesize geopolymer cement in this study. Six geopolymer cement mortars with different FA/GGBS ratios were compared with ordinary Portland cement (OPC) and magnesium potassium phosphate cement (MKPC) mortars in terms of workability, setting time, strength development, volume stability and chloride permeability. The use of high volume of GGBS equips the geopolymer mortars with fast setting and high early strength despite poor volume stability. Thus, GGBS geopolymer mortars could potentially replace the high-cost MKPC mortar for rapid rehabilitation in construction. The geopolymer cement mortar with a FA/GGBS ratio of 4 behaves similar to OPC mortars in terms of fluidity, setting time, strength development, volume stability and chloride permeability. Therefore, FA-based geopolymer mortar blended with 20% GGBS could be considered as a high-efficiency, low-cost, eco-friendly and sustainable replacement of OPC mortar. Overall, the geopolymer cement properties could be engineered based on the FA/GGBS ratio in order to serve local engineering applications for the maximum utilization in different scenarios.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Bernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Cited by
Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.290 · Cited by 360
Multiscale micromechanical analysis of alkali-activated fly ash-slag paste
Fang, G., & Zhang, M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106141 · Cited by 292
Rubberized geopolymer composites: A comprehensive review
Qaidi, S. M. A., Mohammed, A. S., Ahmed, H. U., Faraj, R. H., Emad, W., Tayeh, B. A., Althoey, F., Zaid, O., & Sor, N. H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.123 · Cited by 256
Shi, X., Zhang, C., Wang, X., Zhang, T., & Wang, Q. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125644 · Cited by 131
Metadata
- Authors
- Shang, J., Dai, J.-G., Zhao, T.-J., Guo, S.-Y., Zhang, P., & Mu, B.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 203
- Pages
- 746-756
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2889393361
- Cited by
- 197
- References
- 6
- FWCI
- 13.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.