The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Adsorption of anionic dyes on spent tea leaves modified with polyethyleneimine (PEI-STL)
Abstract
Abstract This paper investigates the adsorption performance of spent tea leaves (STL) modified with polyethylenimine (PEI) on two anionic dyes, namely Reactive Black 5 (RB5) and Methyl Orange (MO), from simulated wastewater. Modification of STL surface with PEI reduced the STL surface area. Abundant basic groups and high point of zero charge were found for PEI-STL. Adsorption capacities of 71.9 mg/g (RB5) and 62.11 mg/g (MO) on PEI-STL were recorded. The adsorption performance of PEI-STL increased with contact time until 100 min, when it became nearly constant. Increasing pH resulted in lower adsorption performance of PEI-STL on RB5 and MO. A positive correlation between adsorbent dosage and adsorption performance of PEI-STL was also observed. Higher temperature promoted the adsorption performance of RB5 dyes, but reduced the adsorption performance of MO. It is proposed that the dyes adsorption proceeds via electrostatic attraction and hydrogen bonding between dyes molecules and adsorbent, while the role of pore filling is minimal. This study demonstrates the superior property of PEI-STL in adsorption of RB5 and MO dyes without carbonization and activation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structure Determination of Organic Compounds
Pretsch, E., Bühlmann, P., & Affolter, C. (2000) · Springer eBooks · doi:10.1007/978-3-662-04201-4 · Cited by 3,026
Wong, S., Ngadi, N., Inuwa, I. M., & Hassan, O. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.059 · Cited by 664
Self-citationAlhashimi, H. A., & Aktas, C. B. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.11.016 · Cited by 547
Mittal, A., Malviya, A., Kaur, D., Mittal, J., & Kurup, L. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.02.028 · Cited by 526
Equilibrium and kinetic studies of methyl orange adsorption on multiwalled carbon nanotubes
Yao, Y., Bing, H., Feifei, X., & Xiaofeng, C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.03.031 · Cited by 505
Characterization of PEI-modified biomass and biosorption of Cu(II), Pb(II) and Ni(II)
Deng, S., & Ting, Y.-P. (2005) · Water Research · doi:10.1016/j.watres.2005.03.033 · Cited by 425
Rejected tea as a potential low-cost adsorbent for the removal of methylene blue
Nasuha, N., Hameed, B. H., & Din, A. T. M. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.09.138 · Cited by 402
Preparation of Graphene Oxide-Based Hydrogels as Efficient Dye Adsorbents for Wastewater Treatment
Guo, H., Jiao, T., Zhang, Q., Guo, W., Peng, Q., & Yan, X. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-0931-2 · Cited by 374
Arsenic removal from aqueous solutions by adsorption on red mud
Soner Altundoğan, H., Altundoğan, S., Tümen, F., & Bildik, M. (2000) · Waste Management · doi:10.1016/s0956-053x(00)00031-3 · Cited by 366
Adsorption of Acid Blue 193 from aqueous solutions onto DEDMA-sepiolite
OZCAN, A., ONCU, E., & OZCAN, A. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.08.037 · Cited by 356
Deng, S., & Ting, Y. P. (2005) · Environmental Science & Technology · doi:10.1021/es050697u · Cited by 343
Saleh, T. A., Naeemullah, Tuzen, M., & Sarı, A. (2017) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2016.10.030 · Cited by 314
Polyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Lin, Y., Yan, Q., Kong, C., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01859 · Cited by 311
Munagapati, V. S., Yarramuthi, V., Kim, Y., Lee, K. M., & Kim, D.-S. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.10.075 · Cited by 288
Ahmed, M. J. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.12.073 · Cited by 264
Adsorption of Brilliant Green dye from aqueous solution onto red clay
Rehman, M. S. U., Munir, M., Ashfaq, M., Rashid, N., Nazar, M. F., Danish, M., & Han, J.-I. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.094 · Cited by 248
Sharma, G., Naushad, M., Kumar, A., Rana, S., Sharma, S., Bhatnagar, A., J. Stadler, F., Ghfar, A. A., & Khan, M. R. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.04.011 · Cited by 247
Chaukura, N., Murimba, E. C., & Gwenzi, W. (2017) · Applied Water Science · doi:10.1007/s13201-016-0392-5 · Cited by 245
Adebisi, G. A., Chowdhury, Z. Z., & Alaba, P. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.047 · Cited by 239
Uptake of heavy metals from synthetic aqueous solutions using modified PEI—silica gels
Ghoul, M., Bacquet, M., & Morcellet, M. (2003) · Water Research · doi:10.1016/s0043-1354(02)00410-4 · Cited by 231
Adsorption characteristics of the hazardous dye Brilliant Green on Saklıkent mud
Kismir, Y., & Aroguz, A. Z. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.090 · Cited by 196
Zubrik, A., Matik, M., Hredzák, S., Lovás, M., Danková, Z., Kováčová, M., & Briančin, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.061 · Cited by 185
Wong, S., Yac'cob, N. A. N., Ngadi, N., Hassan, O., & Inuwa, I. M. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2017.07.015 · Cited by 182
Self-citationOsma, J. F., Saravia, V., Toca-Herrera, J. L., & Rodríguez‐Couto, S. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.112 · Cited by 180
Recycling of eggshell waste into low-cost adsorbent for Ni removal from wastewater
De Angelis, G., Medeghini, L., Conte, A. M., & Mignardi, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.085 · Cited by 171
Wang, L., Yan, W., He, C., Wen, H., Cai, Z., Wang, Z., Chen, Z., & Liu, W. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.031 · Cited by 165
Manjunath, S. V., & Kumar, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.013 · Cited by 165
Tang, C., Shu, Y., Zhang, R., Li, X., Song, J., Li, B., Zhang, Y., & Ou, D. (2017) · RSC Advances · doi:10.1039/c6ra28035h · Cited by 161
Hamzeh, Y., Ashori, A., Azadeh, E., & Abdulkhani, A. (2012) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.04.015 · Cited by 160
Surfactant modified barley straw for removal of acid and reactive dyes from aqueous solution
Oei, B. C., Ibrahim, S. C., Wang, S., & Ang, H. M. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.03.063 · Cited by 158
Saleh, T. A., & Al-Absi, A. A. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.10.064 · Cited by 150
Sajab, M. S., Chia, C. H., Zakaria, S., et al. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.11.010 · Cited by 141
Aroua, M. K., Daud, W. M. A. W., Yin, C. Y., & Adinata, D. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2008.03.003 · Cited by 102
Preparation of activated carbon from empty fruit bunch for hydrogen storage
Arshad, S. H. M., Ngadi, N., Aziz, A. A., Amin, N. S., Jusoh, M., & Wong, S. L. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.10.001 · Cited by 98
Self-citationZiane, S., Bessaha, F., Marouf-Khelifa, K., & Khelifa, A. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.11.130 · Cited by 97
Synthesis of activated carbon from spent tea leaves for aspirin removal
Wong, S. L., Lee, Y., Ngadi, N., Inuwa, I. M., & Mohamed, N. B. (2017) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2017.11.004 · Cited by 96
Self-citationWon, S. W., Kim, H.-J., Choi, S.-H., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.04.005 · Cited by 92
Su, Y., Jiao, Y., Dou, C., & Han, R. (2013) · Desalination and Water Treatment · doi:10.1080/19443994.2013.811121 · Cited by 88
Wang, J., Lu, X., Ng, P. F., Lee, K. I., Fei, B., Xin, J. H., & Wu, J. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.10.035 · Cited by 86
Synthesis, characterization and application of textile sludge biochars for oil removal
Sohaimi, K. S. A., Ngadi, N., Mat, H., Inuwa, I. M., & Wong, S. L. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.02.002 · Cited by 81
Self-citationAlbadarin, A. B., Charara, M., Tarboush, B. J. A., Ahmad, M. N., Kurniawan, T. A., Naushad, M., Walker, G., & Mangwandi, C. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.07.045 · Cited by 79
Bazan‐Wozniak, A., Nowicki, P., & Pietrzak, R. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.114 · Cited by 74
Rubio, F. T. V., Maciel, G. M., da Silva, M. V., Corrêa, V. G., Peralta, R. M., & Haminiuk, C. W. I. (2017) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2017.09.004 · Cited by 72
Hao, L., Wang, P., & Valiyaveettil, S. (2017) · Scientific Reports · doi:10.1038/srep42881 · Cited by 63
Rashed, M. N., Eltaher, M. A., & Abdou, A. (2017) · Royal Society Open Science · doi:10.1098/rsos.170834 · Cited by 62
Inuwa, I. M., Arjmandi, R., Ibrahim, A. N., Kassim, M. H. M., Wong, S. L., Majeed, K., & Hassan, A. (2016) · Fibers and Polymers · doi:10.1007/s12221-016-6238-9 · Cited by 48
Self-citationPark, H. N., Choi, H. A., & Won, S. W. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.160 · Cited by 44
Sadaf, S., Bhatti, H. N., Arif, M., et al. (2015) · Chemistry and Ecology · doi:10.1080/02757540.2014.950568 · Cited by 40
Sayğılı, G. A., & Güzel, F. (2016) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2016.1170608 · Cited by 34
New Activated Carbon from Persian Mesquite Grain as an Excellent Adsorbent
Lemraski, E. G., Sharafinia, S., & Alimohammadi, M. (2017) · Physical chemistry research · doi:10.22036/pcr.2017.38495 · Cited by 18
Effect of Al13 Polycation Grafting on Apple Wastes Activated Carbon That Have A Porous Structure
Marsa, Z. B., Bouchelta, C., dane, N. R., Medjram, M. S., & Magriagri, P. (2017) · Oriental Journal Of Chemistry · doi:10.13005/ojc/330207 · Cited by 2
Cited by
Rápó, E., & Tonk, S. (2021) · Molecules · doi:10.3390/molecules26175419 · Cited by 490
Effective Removal of Anionic Textile Dyes Using Adsorbent Synthesized from Coffee Waste
Wong, S., Ghafar, N. A., Ngadi, N., Razmi, F. A., Inuwa, I. M., Mat, R., & Amin, N. A. S. (2020) · Scientific Reports · doi:10.1038/s41598-020-60021-6 · Cited by 394
Self-citationDeğermenci, G. D., Değermenci, N., Ayvaoğlu, V., Durmaz, E., Çakır, D., & Akan, E. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.260 · Cited by 353
Adsorption of methyl orange: A review on adsorbent performance
Iwuozor, K. O., Ighalo, J. O., Emenike, E. C., Ogunfowora, L. A., & Igwegbe, C. A. (2021) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2021.100179 · Cited by 301
Kinetic and Equilibrium Studies of Congo Red Dye Adsorption on Cabbage Waste Powder
Wekoye, J. N., Wanyonyi, W. C., Wangila, P. T., & Tonui, M. K. (2020) · Environmental Chemistry and Ecotoxicology · doi:10.1016/j.enceco.2020.01.004 · Cited by 238
Metadata
- Authors
- Wong, S., Tumari, H. H., Ngadi, N., Mohamed, N. B., Hassan, O., Mat, R., & Saidina Amin, N. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 206
- Pages
- 394-406
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2894032678
- Cited by
- 285
- References
- 51
- FWCI
- 13.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.