The DOI matches its Crossref record.
Improving the recycling potential of buildings through Material Passports (MP): An Austrian case study
Abstract
A major fraction of building materials is transformed into waste at the end of a building's life cycle. For sustainability reasons, it is of importance to maintain or recycle urban stocks, and in consequence to minimise the use of primary resources, wherefore a Material Passport (MP) represents an important support-tool. A MP acts as a design optimisation tool, as well as an inventory of all materials embedded in a building and displays the recycling potential and environmental impact of buildings. In this paper, the proof of concept for a MP is demonstrated on a use case, which is a residential building, whereby a variant in timber and a variant in concrete construction are evaluated. Results show that the recycling potential of the concrete variant is better; however, concrete leads to more waste, due to its significantly higher mass in comparison with timber. The comparison of the environmental impact of the variants shows, that the variant in timber has a significantly lower impact to the environment, than the variant in concrete. Results also show that the MP-methodology has large potentials for improving the recyclability of new buildings as well as for making assumptions for upcoming materials through displaying embedded materials of existing buildings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 15
- Andersen, 2007, An introductory note on the environmental economics of the circular economy, Sustain. Sci., 2, 133, 10.1007/s11625-006-0013-6 · DOI · Paper page
- Blengini, 2009, Life cycle of buildings, demolition and recycling potential: a case study in Turin, Italy, Build. and Environ., 44, 319, 10.1016/j.buildenv.2008.03.007 · DOI · Paper page
- Bribián, 2011, Life cycle assessment of building materials: comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential, Build. Environ., 46, 1133, 10.1016/j.buildenv.2010.12.002 · DOI · Paper page
- Condeixa, 2017, Material flow analysis of the residential building stock at the city of Rio de Janeiro, J. Clean. Prod., 149, 1249, 10.1016/j.jclepro.2017.02.080 · DOI
- Haas, 2015, How circular is the global economy?: an assessment of material flows, waste production, and recycling in the European Union and the world in 2005, J. Ind. Ecol., 19, 765, 10.1111/jiec.12244 · DOI · Paper page
- Jacobsen, 2006, Industrial symbiosis in Kalundborg, Denmark: a quantitative assessment of economic and environmental aspects, J. Ind. Ecol., 10, 239, 10.1162/108819806775545411 · DOI · Paper page
- Kleemann, 2016, A method for determining buildings' material composition prior to demolition, Build. Res. Inf., 44, 51, 10.1080/09613218.2014.979029 · DOI
- Kohler, 2002, The building stock as a research object, Build. Res. Inf., 30, 226, 10.1080/09613210110102238 · DOI · Paper page
- Lichtensteiger, 2008, Exploration of urban stocks, J. Environ. Eng. Manag., 18, 41
- Pomponi, 2017, Circular economy for the built environment: a research framework, J. Clean. Prod., 143, 710, 10.1016/j.jclepro.2016.12.055 · DOI · Paper page
- Ramesh, 2010, Life cycle energy analysis of buildings: an overview, Energy Build., 42, 1592, 10.1016/j.enbuild.2010.05.007 · DOI · Paper page
- Rees, 1999, The built environment and the ecosphere: a global perspective, Build. Res. Inf., 27, 206, 10.1080/096132199369336 · DOI
- Srinivasan, 2014, Comparison of energy-based indicators used in life cycle assessment tools for buildings, Build. Environ., 79, 138, 10.1016/j.buildenv.2014.05.006 · doi:10.1016/j.buildenv.2014.05.006
- Thormark, 2006, The effect of material choice on the total energy need and recycling potential of a building, Build. Environ., 41, 1019, 10.1016/j.buildenv.2005.04.026 · DOI · Paper page
- Treloar, 2003, An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings, Manag. Environ. Qual. Int. J., 14, 134, 10.1108/14777830310460432 · DOI
Cited by
Circular economy in the construction industry: A systematic literature review
Benachio, G. L. F., Freitas, M. D. C. D., & Tavares, S. F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121046 · Cited by 941
Circular economy strategies for combating climate change and other environmental issues
Yang, M., Chen, L., Wang, J., Msigwa, G., Osman, A. I., Fawzy, S., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01499-6 · Cited by 835
Circular Digital Built Environment: An Emerging Framework
Çetin, S., De Wolf, C., & Bocken, N. (2021) · Sustainability · doi:10.3390/su13116348 · Cited by 367
Minunno, R., O'Grady, T., Morrison, G. M., & Gruner, R. L. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.104855 · Cited by 300
Construction and built environment in circular economy: A comprehensive literature review
Çimen, Ö. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127180 · Cited by 269
Martins, A. C. P., Franco de Carvalho, J. M., Costa, L. C. B., Andrade, H. D., de Melo, T. V., Ribeiro, J. C. L., Pedroti, L. G., & Peixoto, R. A. F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123265 · Cited by 258
Berger, K., Schöggl, J.-P., & Baumgartner, R. J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131492 · Cited by 216
Material Passports for the end-of-life stage of buildings: Challenges and potentials
Honic, M., Kovacic, I., Aschenbrenner, P., & Ragossnig, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128702 · Cited by 181
Self-citationDigitizing material passport for sustainable construction projects using BIM
Atta, I., Bakhoum, E. S., & Marzouk, M. M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103233 · Cited by 165
Çetin, S., Gruis, V., & Straub, A. (2022) · Resources, Conservation & Recycling Advances · doi:10.1016/j.rcradv.2022.200110 · Cited by 148
Çetin, S., Raghu, D., Honic, M., Straub, A., & Gruis, V. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.07.011 · Cited by 147
Self-citationZhang, A., & Seuring, S. (2024) · International Journal of Logistics Research and Applications · doi:10.1080/13675567.2024.2374256 · Cited by 158
“A few studies report DPP use cases or case studies in various product sectors, for example, electric vehicle batteries (Berger, Schöggl, and Baumgartner 2022) and building materials (Çetin, Gruis, and Straub 2022; Honic, Kovacic, and Rechberger 2019).”
Materials passport's review: challenges and opportunities toward a circular economy building sector
Munaro, M. R., & Tavares, S. F. (2021) · Built Environment Project and Asset Management · doi:10.1108/bepam-02-2020-0027 · Cited by 129
van Capelleveen, G., Vegter, D., Olthaar, M., & van Hillegersberg, J. (2023) · Resources, Conservation & Recycling Advances · doi:10.1016/j.rcradv.2023.200131 · Cited by 117
Rahla, K. M., Mateus, R., & Bragança, L. (2021) · Infrastructures · doi:10.3390/infrastructures6040049 · Cited by 99
A Circular Built Environment in the Digital Age
(2024) · Circular Economy and Sustainability · doi:10.1007/978-3-031-39675-5 · Cited by 59
Göswein, V, Carvalho, S., Cerqueira, C., & Lorena, A. (2022) · IOP Conference Series: Earth and Environmental Science · doi:10.1088/1755-1315/1122/1/012049 · Cited by 41
“[5] stated that the existence of a consolidated database of BMPs can help the evaluation and optimization of recycling potential and environmental impacts, which agrees with other areas of research that show the immense potential of using Circular Economy tools and practices earlier in the project to reduce the negati…”
BackgroundResultInfluentialFrom Data Templates to Material Passports and Digital Product Passports
Honic, M., Magalhães, P. M., & Van den Bosch, P. (2024) · Circular Economy and Sustainability · doi:10.1007/978-3-031-39675-5_5 · Cited by 38
Self-citationDefining the goals of Product Passports by circular product strategies
Reich, R. H., Ayan, J., Alaerts, L., & Van Acker, K. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.02.044 · Cited by 30
Architects as catalysts of reuse in construction
Nicholson, V., & Miatto, A. (2024) · Nature Cities · doi:10.1038/s44284-024-00042-8 · Cited by 12
Costa, A. R., Hoolahan, R., & Charef, R. (2025) · npj Materials Sustainability · doi:10.1038/s44296-025-00079-3 · Cited by 17
Veliz Reyes, A., Olmez, D., Grout, J., & Carr, A. (2025) · Architectural Engineering and Design Management · doi:10.1080/17452007.2025.2579731 · Cited by 18
“…databases poses a data management challenge, risking a preference for pre-defined elements instead of the time-consuming task of consolidating data (Honic et al., 2019d), or downstream challenges such as user authentication, criteria definition, governance (Mulhall et al., 2022), supply chain…”
Influential
Metadata
- Authors
- Honic, M., Kovacic, I., & Rechberger, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 217
- Pages
- 787-797
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2914604053
- Cited by
- 212
- References
- 0
- FWCI
- 11.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Funders
- Austrian Ministry for Transport, Innovation and Technology
- Austrian Research Promotion Agency FFG (850049)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.