The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Open accessAbstract
Abstract Interest in innovative construction processes such as 3D concrete printing (i.e. digital construction), is growing rapidly both in academia and industry. Processing conventional geopolymer mixes, in which alkaline solutions are used for activation, could be troublesome in concrete printing due to the high viscosity of the alkaline solution. One-part geopolymers offer one possible solution to this challenge as they involve the use of a solid activator with solid aluminosilicates precursors. In this work, a printable one-part geopolymer mix was developed, which could be extruded through the nozzle of a 3D printer and stacked together without deforming the bottom layers. Flow properties such as yield stress, viscosity and thixotropy of the developed geopolymer were assessed along with its strength development curve. Printed specimen showed anisotropic behaviour in mechanical properties when compared to the mould casted samples. Microstructural characterization revealed the formation of alumino-silicate gel with high tetrahedrally coordinated Al and interlayer K ions in its structure. When compared to OPC-based mixes, the developed geopolymer mixes revealed a lower environmental impact, which could be even further reduced with the use of alternative activators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Cited by
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Self-citationExtrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Self-citationLiu, C., Wang, X., Chen, Y., Zhang, C., Ma, L., Deng, Z., Chen, C., Zhang, Y., Pan, J., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104158 · Cited by 266
Metadata
- Authors
- Panda, B., Singh, G. B., Unluer, C., & Tan, M. J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 220
- Pages
- 610-619
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2916091938
- Cited by
- 254
- References
- 42
- FWCI
- 17.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.