The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Geopolymer-zeolite composites: A review
Abstract
Although the formation of zeolites in geopolymers have been mentioned in many works, a particular interest in geopolymer-zeolite composites started to increase very recently. Such hybrid materials connect the advantageous properties of both constituents: geopolymer serves as a strong and durable support for zeolites, when zeolites provide high surface area, porosity and adsorption capacity. The composites can be therefore used as bulk-type adsorbents as well as membranes in separation and pervaporation processes. The possibility of the utilization of industrial wastes for their production is also a sustainability benefit. This review article highlights advances in the field of geopolymer-zeolite composites manufacturing and applications. The resistance of zeolites in geopolymer matrices, methods of their detection and effect of their presence on the properties of hybrid materials are discussed as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Alkali-activated binders: A review
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.015 · Cited by 989
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Microstructure development of alkali-activated fly ash cement: a descriptive model
Fernández-Jiménez, A., Palomo, A., & Criado, M. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.08.021 · Cited by 875
Compressive strength and microstructural characteristics of class C fly ash geopolymer
Guo, X., Shi, H., & Dick, W. A. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.11.003 · Cited by 820
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Evolution of binder structure in sodium silicate-activated slag-metakaolin blends
Bernal, S. A., Provis, J. L., Rose, V., & Mejía de Gutierrez, R. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.09.004 · Cited by 786
Durability of geopolymer materials in sodium and magnesium sulfate solutions
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.09.002 · Cited by 783
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 674
Mid-infrared spectroscopic studies of alkali-activated fly ash structure
Fernández-Jiménez, A., & Palomo, A. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.057 · Cited by 625
Alkali-activated cements Opportunities and challenges
Roy, D. M. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00093-3 · Cited by 608
Chemical stability of cementitious materials based on metakaolin
Palomo, A., Blanco-Varela, M. T., Granizo, M. L., Puertas, F., Vazquez, T., & Grutzeck, M. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00074-5 · Cited by 608
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 605
Durability of alkali-activated fly ash cementitious materials
Fernandez-Jimenez, A., García-Lodeiro, I., & Palomo, A. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0584-8 · Cited by 593
The role played by the reactive alumina content in the alkaline activation of fly ashes
Fernández-Jiménez, A., Palomo, A., Sobrados, I., & Sanz, J. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.015 · Cited by 590
Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Lukey, G. C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.02.044 · Cited by 580
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 507
An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash
Criado, M., Fernández-Jiménez, A., de la Torre, A. G., Aranda, M. A. G., & Palomo, A. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.013 · Cited by 503
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
Bakharev, T. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.022 · Cited by 494
Zhang, Z., Wang, H., Provis, J. L., Bullen, F., Reid, A., & Zhu, Y. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.03.021 · Cited by 494
Wan, Q., Rao, F., Song, S., García, R. E., Estrella, R. M., Patiño, C. L., & Zhang, Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.014 · Cited by 481
Álvarez-Ayuso, E., Querol, X., Plana, F., Alastuey, A., Moreno, N., Izquierdo, M., Font, O., Moreno, T., Diez, S., Vázquez, E., et al. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.10.008 · Cited by 480
Efflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Alkaline Activation of Fly Ashes: NMR Study of the Reaction Products
Palomo, Á., Alonso, S., Fernandez‐Jiménez, A., Sobrados, I., & Sanz, J. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.01141.x · Cited by 463
A review on properties of fresh and hardened geopolymer mortar
Zhang, P., Zheng, Y., Wang, K., & Zhang, J. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.06.031 · Cited by 448
Mechanical and microstructural properties of alkali-activated fly ash geopolymers
Komljenović, M., Baščarević, Z., & Bradić, V. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.064 · Cited by 446
A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
Siyal, A. A., Shamsuddin, M. R., Khan, M. I., Rabat, N. E., Zulfiqar, M., Man, Z., Siame, J., & Azizli, K. A. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.046 · Cited by 443
Attenuated Total Reflectance Fourier Transform Infrared Analysis of Fly Ash Geopolymer Gel Aging
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la700713g · Cited by 434
Strength development in clay–fly ash geopolymer
Sukmak, P., Horpibulsuk, S., & Shen, S.-L. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.015 · Cited by 405
Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers
Heah, C. Y., Kamarudin, H., Mustafa Al Bakri, A. M., Bnhussain, M., Luqman, M., Khairul Nizar, I., Ruzaidi, C. M., & Liew, Y. M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.102 · Cited by 401
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Geopolymers for immobilization of Cr6+, Cd2+, and Pb2+
Zhang, J., Provis, J. L., Feng, D., & van Deventer, J. S. J. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.053 · Cited by 369
The composition range of aluminosilicate geopolymers
Fletcher, R. A., MacKenzie, K. J. D., Nicholson, C. L., & Shimada, S. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2004.06.001 · Cited by 369
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Geopolymerisation kinetics. 2. Reaction kinetic modelling
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.028 · Cited by 323
Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag
Sun, Z., & Vollpracht, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.004 · Cited by 320
Hwang, C., & Huynh, T. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.025 · Cited by 294
Geopolymer synthesis using alkaline activation of natural zeolite
Villa, C., Pecina, E. T., Torres, R., & Gómez, L. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.052 · Cited by 291
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Microstructural and morphological evolution of fly ash based geopolymers
Nath, S. K., Maitra, S., Mukherjee, S., & Kumar, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.106 · Cited by 274
Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes
Hu, W., Nie, Q., Huang, B., Shu, X., & He, Q. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.086 · Cited by 274
Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment
Ye, N., Yang, J., Ke, X., Zhu, J., Li, Y., Xiang, C., Wang, H., Li, L., & Xiao, B. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12840 · Cited by 257
Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymers
Provis, J. L., Yong, C. Z., Duxson, P., & van Deventer, J. S. J. (2009) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.11.019 · Cited by 244
The mechanism of geopolymer gel formation investigated through seeded nucleation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2008) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.12.019 · Cited by 242
The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars
Xu, H., & van Deventer, J. S. J. (2003) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00499-5 · Cited by 234
The relation between structure and vibrational spectra of natural zeolites
Mozgawa, W. (2001) · Journal of Molecular Structure · doi:10.1016/s0022-2860(01)00741-4 · Cited by 233
Self-citationIR spectroscopy studies of zeolites in geopolymeric materials derived from kaolinite
Król, M., Minkiewicz, J., & Mozgawa, W. (2016) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2016.02.027 · Cited by 232
Self-citationThe thermal evolution of metakaolin geopolymers: Part 2 – Phase stability and structural development
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.02.050 · Cited by 229
Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.027 · Cited by 224
Komnitsas, K., Zaharaki, D., & Perdikatsis, V. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.04.055 · Cited by 223
Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder
Rodríguez, E. D., Bernal, S. A., Provis, J. L., Paya, J., Monzo, J. M., & Borrachero, M. V. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.025 · Cited by 214
A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution
Liu, Y., Yan, C., Zhang, Z., Wang, H., Zhou, S., & Zhou, W. (2016) · Fuel · doi:10.1016/j.fuel.2016.07.116 · Cited by 214
Andrejkovičová, S., Sudagar, A., Rocha, J., Patinha, C., Hajjaji, W., da Silva, E. F., Velosa, A., & Rocha, F. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.03.009 · Cited by 209
Medium-term phase stability of Na2O–Al2O3–SiO2–H2O geopolymer systems
Silva, P. D., & Sagoe-Crenstil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.10.003 · Cited by 208
Suksiripattanapong, C., Horpibulsuk, S., Chanprasert, P., Sukmak, P., & Arulrajah, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.040 · Cited by 194
Stabilization/solidification of heavy metals in kaolin/zeolite based geopolymers
El-Eswed, B. I., Yousef, R. I., Alshaaer, M., Hamadneh, I., Al-Gharabli, S. I., & Khalili, F. (2015) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2015.03.002 · Cited by 187
Alkaline activation of metakaolin–fly ash mixtures: Obtain of Zeoceramics and Zeocements
Fernández-Jiménez, A., Monzó, M., Vicent, M., Barba, A., & Palomo, A. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.03.024 · Cited by 187
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M., & Abd el Gawaad, H. A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.121 · Cited by 187
Sustainable alkali activated materials: Precursor and activator derived from industrial wastes
Fernández‐Jiménez, A., Cristelo, N., Miranda, T. F. D. S., & Palomo, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.151 · Cited by 187
Coal combustion products - A global perspective
Heidrich, C., Feuerborn, H.-J., & Weir, A. (2013) · IEEE PowerTech Conference · Cited by 180
Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers
Koloušek, D., Brus, J., Urbanova, M., Andertova, J., Hulinsky, V., & Vorel, J. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1910-5 · Cited by 175
Application of IR spectra in the studies of zeolites from D4R and D6R structural groups
Król, M., Mozgawa, W., Jastrzębski, W., & Barczyk, K. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.040 · Cited by 174
Self-citationSpectroscopic studies of fly ash-based geopolymers
Rożek, P., Król, M., & Mozgawa, W. (2018) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2018.03.034 · Cited by 168
Self-citationAlkali-activated complex binders from class C fly ash and Ca-containing admixtures
Guo, X., Shi, H., Chen, L., & Dick, W. A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.08.110 · Cited by 166
Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation
Temuujin, J., Minjigmaa, A., Rickard, W. D. A., Lee, M., Williams, I., & van Riessen, A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.121 · Cited by 163
Sulfuric acid resistance of one-part alkali-activated mortars
Sturm, P., Gluth, G. J. G., Jäger, C., Brouwers, H. J. H., & Kühne, H.-C. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.009 · Cited by 163
Alkali-activated fly ash-based geopolymers with zeolite or bentonite as additives
Hu, M., Zhu, X., & Long, F. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.07.006 · Cited by 158
Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder
Yun-Ming, L., Kamarudin, H., Abdullah, M. M. A. B., Bnhussain, M., Musa, L., Nizar, I. K., Ruzaidi, C. M., & Cheng-Yong, H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.07.075 · Cited by 158
Quantitative XRD study of amorphous phase in alkali activated low calcium siliceous fly ash
Bhagath Singh, G. V. P., & Subramaniam, K. V. L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.081 · Cited by 158
Characterization of novel geopolymer – Zeolite composites as solid adsorbents for CO2 capture
Minelli, M., Papa, E., Medri, V., Miccio, F., Benito, P., Doghieri, F., & Landi, E. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.050 · Cited by 157
The effect of limestone on sodium hydroxide-activated metakaolin-based geopolymers
Ćwirzeń, A., Provis, J. L., Penttala, V., & Habermehl-Cwirzen, K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.022 · Cited by 156
Geopolymer materials based on natural zeolite
Nikolov, A., Rostovsky, I., & Nugteren, H. W. (2017) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2017.03.001 · Cited by 148
Ye, H., & Radlińska, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.099 · Cited by 144
Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment
Lee, N. K., Khalid, H. R., & Lee, H. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.016 · Cited by 139
Synthesis of geopolymer-supported zeolites via robust one-step method and their adsorption potential
Khalid, H. R., Lee, N. K., Park, S., Abbas, N., & Lee, H. K. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.04.049 · Cited by 131
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.02.045 · Cited by 130
Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structure
Lancellotti, I., Catauro, M., Ponzoni, C., Bollino, F., & Leonelli, C. (2013) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2013.02.003 · Cited by 129
Chindaprasirt, P., Paisitsrisawat, P., & Rattanasak, U. (2014) · Advanced Powder Technology · doi:10.1016/j.apt.2014.02.007 · Cited by 128
Characterization of natural pozzolan-based geopolymeric binders
Moon, J., Bae, S., Çelik, K., Yoon, S., Kim, K., Kim, K. S., & Monteiro, P. J. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.06.010 · Cited by 126
Atomic Structure of a Cesium Aluminosilicate Geopolymer: A Pair Distribution Function Study
Bell, J. L., Sarin, P., Provis, J. L., Haggerty, R. P., Driemeyer, P. E., Chupas, P. J., van Deventer, J. S. J., & Kriven, W. M. (2008) · Chemistry of Materials · doi:10.1021/cm703369s · Cited by 125
Król, M., Rożek, P., Chlebda, D. K., & Mozgawa, W. (2018) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2018.02.067 · Cited by 124
Self-citationEffect of blast furnace slag grades on fly ash based geopolymer waste forms
Xu, H., Gong, W., Syltebo, L., Izzo, K., Lutze, W., & Pegg, I. L. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.018 · Cited by 121
New synthesis method for the production of coal fly ash-based foamed geopolymers
Böke, N., Birch, G. D., Nyale, S. M., & Petrik, L. F. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.041 · Cited by 120
Yousef, R. I., El-Eswed, B. I., Alshaaer, M., Khalili, F. I., & Khoury, H. N. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.004 · Cited by 116
Lee, N. K., Khalid, H. R., & Lee, H. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.01.030 · Cited by 115
Soré, S. O., Messan, A., Prud’homme, É., Escadeillas, G., & Tsobnang, F. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.102 · Cited by 114
Huang, X. B., Zhuang, R., Muhammad, F., Yu, L., Shiau, Y.-C., & Li, D. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.10.067 · Cited by 114
Khan, M., Azizli, K. A., Sufian, S. B., & Man, Z. B. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.10.099 · Cited by 112
Noor‐ul‐Amin, Faisal, M., Muhammad, K., & Gul, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.024 · Cited by 106
Impact of activator type on the immobilisation of lead in fly ash-based geopolymer
Lee, S., van Riessen, A., Chon, C., Kang, N.-H., Jou, H., & Kim, Y. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.11.023 · Cited by 104
Olive-stone biomass ash (OBA): An alternative alkaline source for the blast furnace slag activation
Pinheiro, S. M. D. M., Font, A., Soriano, L., TASHIMA, M. M., Monzó, J., Borrachero, M. V., & Payá, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.157 · Cited by 103
Panagiotopoulou, C., Tsivilis, S. G., & Kakali, G. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.005 · Cited by 99
Effect of sodium sulfate on the alkali activation of fly ash
Criado, M., Fernández‐Jiménez, A., & Palomo, A. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.05.002 · Cited by 98
Peng, M. X., Wang, Z. H., Shen, S. H., Xiao, Q. G., Li, L. J., Tang, Y. C., & Hu, L. L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.010 · Cited by 98
Naghsh, M., & Shams, K. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.06.008 · Cited by 95
Singh, G. V. P. B., & Subramaniam, K. V. L. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.05.001 · Cited by 90
Alzeer, M. I. M., & MacKenzie, K. J. D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04923 · Cited by 89
Sturm, P., Gluth, G. J. G., Simon, S., Brouwers, H. J. H., & Kühne, H. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.04.015 · Cited by 87
Solid Reactant-Based Geopolymers from Rice Hull Ash and Sodium Aluminate
Hajimohammadi, A., & van Deventer, J. S. J. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9735-6 · Cited by 77
Alkali-activation potential of biomass-coal co-fired fly ash
Shearer, C. R., Provis, J. L., Bernal, S. A., & Kurtis, K. E. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.014 · Cited by 75
Ma, X., Zhang, Z., & Wang, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.049 · Cited by 74
Immobilization of strontium-loaded zeolite A by metakaolin based-geopolymer
Xu, Z., Jiang, Z., Wu, D., Peng, X., Xu, Y., Li, N., Qi, Y., & Li, P. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.12.092 · Cited by 72
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M. M., & Abdel‐Gawwad, H. A. (2015) · Epitoanyag-Journal of Silicate Based and Composite Materials · doi:10.14382/epitoanyag-jsbcm.2015.7 · Cited by 71
Peng, M. X., Wang, Z. H., Xiao, Q. G., Song, F., Xie, W., Yu, L. C., Huang, H. W., & Yi, S. J. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.01.020 · Cited by 69
Glid, M., Sobrados, I., Rhaiem, H. B., Sanz, J., & Amara, A. B. H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.144 · Cited by 67
Synthesis of zeolites at low temperatures in fly ash-kaolinite mixtures
Belviso, C., Giannossa, L. C., Huertas, F. J., Lettino, A., Mangone, A., & Fiore, S. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.03.012 · Cited by 63
A novel study on the influence of cork waste residue on metakaolin-zeolite based geopolymers
Sudagar, A. J., Andrejkovičová, S., Patinha, C. A. D. F., Velosa, A., McAdam, A. C., da Silva, E. F., & Rocha, F. T. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.11.013 · Cited by 59
Calorimetric study of geopolymer binders based on natural pozzolan
Kani, E. N., Allahverdi, A., & Provis, J. L. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5850-7 · Cited by 58
Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin
Clausi, M., Fernández‐Jiménez, A., Palomo, A., Tarantino, S. C., & Zema, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.221 · Cited by 58
Behaviour of metakaolin-based geopolymers incorporating sewage sludge ash (SSA)
Istuque, D. B., Reig, L., Moraes, J. C. B., Akasaki, J. L., Borrachero, M. V., Soriano, L., Payá, J., Malmonge, J. A., & TASHIMA, M. M. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.05.137 · Cited by 56
Preparation of porous P-type zeolite spheres with suspension solidification method
Tang, Q. G., Ge, Y., Wang, K.-T., He, Y., & Cui, X. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.09.062 · Cited by 53
Hafid, K. E., Hajjaji, M., & Hafid, H. E. (2017) · Journal of Building Engineering · doi:10.1016/j.jobe.2017.04.012 · Cited by 53
Effect of calcium on the alkaline activation of aluminosilicate glass
García-Lodeiro, I., Aparicio-Rebollo, E., Fernández‐Jiménez, A., & Palomo, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.01.184 · Cited by 48
Effect of vacuum dehydration on gel structure and properties of metakaolin-based geopolymers
Li, W., Lemougna, P. N., Wang, K., He, Y., Tong, Z., & Cui, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.07.190 · Cited by 45
Rasouli, H., Golestani-Fard, F., Mirhabibi, A. R., Nasab, G. M., MacKenzie, K. J. D., & Shahraki, M. H. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.02.125 · Cited by 43
The influence of dealumination/desilication on structural properties of metakaolin-based geopolymers
Brylewska, K., Rożek, P., Król, M., & Mozgawa, W. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.04.095 · Cited by 43
Self-citationHafid, K. E., & Hajjaji, M. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.03.015 · Cited by 42
Comparative study on morphology of ground sub-bituminus FBC fly ash geopolymeric material
Eiamwijit, M., Pachana, K., Kaewpirom, S., Rattanasak, U., & Chindaprasirt, P. (2015) · Advanced Powder Technology · doi:10.1016/j.apt.2015.04.013 · Cited by 39
Greiser, S., Sturm, P., Gluth, G. J. G., Hunger, M., & Jäger, C. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.11.004 · Cited by 39
Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment
Zhang, Z., Li, L., He, D., Ma, X., Yan, C., & Wang, H. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.04.214 · Cited by 38
The effect of calcination temperature on metakaolin structure for the synthesis of zeolites
Król, M., & Rożek, P. (2018) · Clay Minerals · doi:10.1180/clm.2018.49 · Cited by 38
Self-citationBrazilian fly ash based inorganic polymers production using different alkali activator solutions
Azevedo, A. G. D. S., & Strecker, K. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.04.044 · Cited by 36
Prud’homme, É., Michaud, P., Joussein, E., & Rossignol, S. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.05.043 · Cited by 34
Baykara, H., Cornejo, M., Murillo, R., Gavilanes, A., Paredes, C., & Elsen, J. (2017) · Materials and Structures · doi:10.1617/s11527-017-1057-z · Cited by 33
The influence of ambient pH on fly ash-based geopolymer
Nguyen, A. D., & Škvára, F. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.010 · Cited by 32
Development of functional geopolymers for water purification, and construction purposes
Alshaaer, M., El-Eswed, B. I., Yousef, R. I., Khalili, F. I., & Rahier, H. (2012) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2012.09.012 · Cited by 30
Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes
Jun, Y., & Oh, J. E. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.058 · Cited by 27
Gordon, L. E., Nicolas, R. S., & Provis, J. L. (2014) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2014.06.005 · Cited by 24
Ulloa, N. A., Baykara, H., Rigail-Cedeño, A. F., Cornejo, M., & Villalba, J. L. (2017) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2017.06.066 · Cited by 21
Alkali-activation of spent fluid cracking catalysts for CO 2 capture
da Silva, J. S., Neto, R. M. D. J., Fiuza, R. A., Gonçalves, J. P., Mascarenhas, A. J. S., & Andrade, H. M. C. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.06.005 · Cited by 20
Preparation of NaA zeolite spheres from geopolymer gels using a one‐step method in silicone oil
Liu, Z.-H., Tang, Q. G., Li, C., He, Y., & Cui, X. (2017) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12708 · Cited by 20
Król, M., Brylewska, K., Knapik, A., Kornaus, K., & Mozgawa, W. (2017) · Green Sciences · doi:10.1515/pjct-2017-0075 · Cited by 20
Self-citation
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Advances in alkali-activation of clay minerals
Khalifa, A. Z., Cizer, Ö., Pontikes, Y., Heath, A., Patureau, P., Bernal, S. A., & Marsh, A. T. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 436
Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118641 · Cited by 261
Liu, Y., Zhao, S., Qiu, X., Meng, Y., Wang, H., Zhou, S., Qiao, Q., & Yan, C. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.117167 · Cited by 43
Cao, Y., Yu, X., Wang, T., Li, J., Li, N., Ge, A., Ying, J., & Yu, T. (2024) · Chemistry - An Asian Journal · doi:10.1002/asia.202400342 · Cited by 9
Metadata
- Authors
- Rożek, P., Król, M., & Mozgawa, W.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 230
- Pages
- 557-579
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2946311814
- Cited by
- 361
- References
- 133
- FWCI
- 13.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.