The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Life cycle assessment of bio-based and fossil-based plastic: A review
Open accessAbstract
This review assesses the state-of-the-art in comparative Life Cycle Assessment of fossil-based and bio-based polymers. Published assessments are critically reviewed and compared to the European Union Product Environmental Footprint (EU PEF) standards. No published articles were found to fully meet the standards, but the critical review method was used to classify the articles by their level of compliance. 25 articles partially met the PEF standards, giving 39 fossil-based and 50 bio-based polymer case results. Ultimately, it was possible to compare seven bio-based polymers and seven fossil-based polymers across seven impact categories (energy use, ecotoxicity, acidification, eutrophication, climate change, particulate matter formation and ozone depletion). Significant variation was found between polymer types and between fossil-based and bio-based polymers, meaning it was not possible to conclusively declare any polymer type as having the least environmental impact in any category. Significant variation was also seen between different studies of the same polymer, for both fossil-based and bio-based polymers. In some cases this variation was of the order of 400%. Results suggest that a large part of this variation is related to the Life Cycle Assessment methodologies applied, particularly in the end-of-life treatment, the use of credits for absorbed Carbon Dioxide, and the allocation of multifunctional process impacts. The feedstock source and processing method assumed for bio-based polymers were also major sources of variation. The challenges of Life Cycle Assessment, particularly in a complex, geographically diverse and young industry like bio-based polymers, are recognised. It is proposed that the PEF standards should be adopted more widely in order to homogenise the methods used and allow meaningful comparison between LCA studies on fossil-based and bio-based polymers, and between studies of the same polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Staudinger, H. (1920) · Berichte der deutschen chemischen Gesellschaft (A and B Series) · doi:10.1002/cber.19200530627 · Cited by 665
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Bio-based plastics - A review of environmental, social and economic impact assessments
Spierling, S., Knüpffer, E., Behnsen, H., Mudersbach, M., Krieg, H., Springer, S., Albrecht, S., Herrmann, C., & Endres, H.-J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.014 · Cited by 502
HARDING, K., DENNIS, J., VONBLOTTNITZ, H., & HARRISON, S. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.02.012 · Cited by 461
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 256
Biopolymer production and end of life comparisons using life cycle assessment
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.03.002 · Cited by 255
Papong, S., Malakul, P., Trungkavashirakun, R., Wenunun, P., Chom-in, T., Nithitanakul, M., & Sarobol, E. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.09.030 · Cited by 250
Life cycle assessment of the manufacture of lactide and PLA biopolymers from sugarcane in Thailand
Groot, W. J., & Borén, T. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0225-y · Cited by 249
Life cycle impact assessment of bio-based plastics from sugarcane ethanol
Tsiropoulos, I., Faaij, A. P. C., Lundquist, L., Schenker, U., Briois, J. F., & Patel, M. K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.071 · Cited by 213
Life cycle assessment of recycling options for polylactic acid
Maga, D., Hiebel, M., & Thonemann, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.05.018 · Cited by 211
Cited by
Bioplastics for a circular economy
Rosenboom, J.-G., Langer, R., & Traverso, G. (2022) · Nature Reviews Materials · doi:10.1038/s41578-021-00407-8 · Cited by 2,116
Moshood, T. D., Nawanir, G., Mahmud, F., Mohamad, F., Ahmad, M. H., & AbdulGhani, A. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100273 · Cited by 784
Achieving net-zero greenhouse gas emission plastics by a circular carbon economy
Meys, R., Kätelhön, A., Bachmann, M., Winter, B., Zibunas, C., Suh, S., & Bardow, A. (2021) · Science · doi:10.1126/science.abg9853 · Cited by 577
Environmental impact of bioplastic use: A review
Atiwesh, G., Mikhael, A., Parrish, C. C., Banoub, J., & Le, T.-A. T. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e07918 · Cited by 569
Qin, M., Chen, C., Song, B., Shen, M., Cao, W., Yang, H., Zeng, G., & Gong, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127816 · Cited by 455
Bioplastic production in terms of life cycle assessment: A state-of-the-art review
Ali, S. S., Abdelkarim, E. A., Elsamahy, T., Al-Tohamy, R., Li, F., Kornaros, M., Zuorro, A., Zhu, D., & Sun, J. (2023) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2023.100254 · Cited by 361
A Review of Bioplastics and Their Adoption in the Circular Economy
Di Bartolo, A., Infurna, G., & Dintcheva, N. T. (2021) · Polymers · doi:10.3390/polym13081229 · Cited by 331
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
The Life Cycle Assessment for Polylactic Acid (PLA) to Make It a Low-Carbon Material
Rezvani Ghomi, E. R., Khosravi, F., Saedi Ardahaei, A. S., Dai, Y., Neisiany, R. E., Foroughi, F., Wu, M., Das, O., & Ramakrishna, S. (2021) · Polymers · doi:10.3390/polym13111854 · Cited by 295
Biobased vitrimers: Towards sustainable and adaptable performing polymer materials
Lucherelli, M. A., Duval, A., & Avérous, L. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101515 · Cited by 291
Biodegradation of Polymers: Stages, Measurement, Standards and Prospects
Silva, R. R. A., Marques, C. S., Arruda, T. R., Teixeira, S. C., & de Oliveira, T. V. (2023) · Macromol · doi:10.3390/macromol3020023 · Cited by 284
100th Anniversary of Macromolecular Science Viewpoint: Redefining Sustainable Polymers
Fagnani, D. E., Tami, J. L., Copley, G., Clemons, M. N., Getzler, Y. D. Y. L., & McNeil, A. J. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00789 · Cited by 280
Klemeš, J. J., Fan, Y. V., & Jiang, P. (2020) · Energy · doi:10.1016/j.energy.2020.118701 · Cited by 258
Davidson, M. G., Elgie, S., Parsons, S., & Young, T. J. (2021) · Green Chemistry · doi:10.1039/d1gc00721a · Cited by 253
Yusuf, A., Sodiq, A., Giwa, A., Eke, J., Pikuda, O., Eniola, J. O., Ajiwokewu, B., Sambudi, N. S., & Bilad, M. R. (2022) · Environmental Pollution · doi:10.1016/j.envpol.2021.118421 · Cited by 138
Polylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications
Islam, M. S., Elahee, G. M. F., Fang, Y., Yu, X. (., Advincula, R. C., & Cao, C. (. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112842 · Cited by 86
Leinonen, I. (2022) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-022-02086-1 · Cited by 41
“2012; Walker and Rothman 2020).”
BackgroundLife cycle assessment and economic analysis of bioplastics production from cyanobacteria
Rueda, E., Senatore, V., Zarra, T., Naddeo, V., García, J., & Garfí, M. (2023) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2023.e00579 · Cited by 41
A Lifecycle Assessment of Meat Processing Products Made from Protein-Based Thermoplastics
Verbeek, C. J. R., Van der Merwe, D. W., & Bier, J. M. (2023) · Sustainability · doi:10.3390/su15043455 · Cited by 6
Metadata
- Authors
- Walker, S., & Rothman, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 261
- Pages
- 121158
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3013328719
- Cited by
- 480
- References
- 26
- FWCI
- 18.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.