The DOI matches its Crossref record; 300 of the 300 references it cites were found in a registry or an index.
Potential of building integrated and attached/applied photovoltaic (BIPV/BAPV) for adaptive less energy-hungry building’s skin: A comprehensive review
Open accessAbstract
The inclusion of photovoltaic (PV) technologies add extra functionalities in a building by replacing the conventional structural material and harnessing benign electricity aesthetically from PV. Building integration (BI) and building attached/applied (BA) are the two techniques to include PV in a building. Currently, first, and second-generation PV technologies are already included for BIPV and BAPV application in the form of wall, roof, and window whereas third generation PVs are under rigours exploration to find their potential suitability. To alleviate enhanced temperature from both BIPV and BAPV, active and passive cooling can be introduced, however passive techniques are influential in trimming down the temperature for retrofit building. Shading from snow, dust cover and nearby building can be an obstacle for BIPV/BAPV application. The hydrophobic (icephobic) self-cleaning coating is suited for snow covering PV while hydrophobic and hydrophilic are both applicable for anti-soiling. Electric vehicles, autonomous switchable glazing, low heat loss glazing and lightweight BIPV are the different future application for PV in BI and BA integration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
IOP Conf. Ser.: Mater. Sci. Eng. 117 012045
Wu, M., Vakhrushev, A., Ludwig, A., & Kharicha, A. (2016) · Cited by 4,975
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Grätzel, M. (2003) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/s1389-5567(03)00026-1 · Cited by 4,405
A Review of Single-Phase Grid-Connected Inverters for Photovoltaic Modules
Kjaer, S. B., Pedersen, J. K., & Blaabjerg, F. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.853371 · Cited by 3,621
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
A review of solar photovoltaic technologies
Parida, B., Iniyan, S., & Goic, R. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.032 · Cited by 2,018
Photovoltaic Degradation Rates—an Analytical Review
Jordan, D. C., & Kurtz, S. R. (2013) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.1182 · Cited by 1,529
A review on photovoltaic/thermal hybrid solar technology
Chow, T. T. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.06.037 · Cited by 1,499
A review of energy sources and energy management system in electric vehicles
Tie, S. F., & Tan, C. W. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.077 · Cited by 1,463
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Cao, X., Dai, X., & Liu, J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.06.089 · Cited by 1,436
Kippelen, B., & Brédas, J.-L. (2009) · Energy & Environmental Science · doi:10.1039/b812502n · Cited by 1,267
Kouro, S., Leon, J. I., Vinnikov, D., & Franquelo, L. G. (2015) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2014.2376976 · Cited by 1,197
High-efficiency crystalline silicon solar cells: status and perspectives
Battaglia, C., Cuevas, A., & De Wolf, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03380b · Cited by 1,178
Review on dye-sensitized solar cells (DSSCs): Advanced techniques and research trends
Gong, J., Sumathy, K., Qiao, Q., & Zhou, Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.097 · Cited by 1,173
Jacobson, M. Z., Delucchi, M. A., Bauer, Z. A. F., Goodman, S. C., Chapman, W. E., Cameron, M. A., Bozonnat, C., Chobadi, L., Clonts, H. A., Enevoldsen, P., et al. (2017) · Joule · doi:10.1016/j.joule.2017.07.005 · Cited by 1,142
Das, H. S., Rahman, M. M., Li, S., & Tan, C. W. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109618 · Cited by 1,140
Photovoltaic solar cell technologies: analysing the state of the art
Nayak, P. K., Mahesh, S., Snaith, H. J., & Cahen, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0097-0 · Cited by 1,139
Variants in ELL2 influencing immunoglobulin levels associate with multiple myeloma
Swaminathan, B., Thorleifsson, G., Jöud, M., Ali, M., Johnsson, E., Ajore, R., Sulem, P., Halvarsson, B.-M., Eyjolfsson, G., Haraldsdottir, V., et al. (2015) · Nature Communications · doi:10.1038/ncomms8213 · Cited by 1,132
A review of thin film solar cell technologies and challenges
Lee, T. D., & Ebong, A. U. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.028 · Cited by 1,091
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Grid-connected photovoltaic power systems: Technical and potential problems—A review
Eltawil, M. A., & Zhao, Z. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.015 · Cited by 1,048
Richardson, D. B. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.042 · Cited by 999
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials
Gong, J., Liang, J., & Sumathy, K. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.044 · Cited by 973
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Present status and future prospects of perovskite photovoltaics
Snaith, H. J. (2018) · Nature Materials · doi:10.1038/s41563-018-0071-z · Cited by 803
An overview of solar photovoltaic panels’ end-of-life material recycling
Chowdhury, M. S., Rahman, K. S., Chowdhury, T., Nuthammachot, N., Techato, K., Akhtaruzzaman, M., Tiong, S. K., Sopian, K., & Amin, N. (2020) · Energy Strategy Reviews · doi:10.1016/j.esr.2019.100431 · Cited by 785
A review of Battery Electric Vehicle technology and readiness levels
Mahmoudzadeh Andwari, A., Pesiridis, A., Rajoo, S., Martinez-Botas, R., & Esfahanian, V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.138 · Cited by 784
A black body absorber from vertically aligned single-walled carbon nanotubes
Mizuno, K., Ishii, J., Kishida, H., Hayamizu, Y., Yasuda, S., Futaba, D. N., Yumura, M., & Hata, K. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900155106 · Cited by 782
Peng, J., Lu, L., & Yang, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.035 · Cited by 772
Advances in crystalline silicon solar cell technology for industrial mass production
Saga, T. (2010) · NPG Asia Materials · doi:10.1038/asiamat.2010.82 · Cited by 764
Solar cell efficiency tables (Version 53)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., Yoshita, M., & Ho‐Baillie, A. W. Y. (2019) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3102 · Cited by 764
Superhydrophobic Surfaces: Are They Really Ice-Repellent?
Kulinich, S. A., Farhadi, S., Nose, K., & Du, X. W. (2011) · Langmuir · doi:10.1021/la104277q · Cited by 737
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Hybrid photovoltaic/thermal solar systems
Tripanagnostopoulos, Y., Nousia, T., Souliotis, M., & Yianoulis, P. (2002) · Solar Energy · doi:10.1016/s0038-092x(01)00096-2 · Cited by 602
Petter Jelle, B., Breivik, C., & Drolsum Røkenes, H. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.12.016 · Cited by 597
Di Giacomo, F., Zardetto, V., D'Epifanio, A., Pescetelli, S., Matteocci, F., Razza, S., Di Carlo, A., Licoccia, S., Kessels, W. M. M., Creatore, M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401808 · Cited by 595
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
A feasibility study of a stand-alone hybrid solar–wind–battery system for a remote island
Ma, T., Yang, H., & Lu, L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.090 · Cited by 575
Terawatt-scale photovoltaics: Transform global energy
Haegel, N. M., Atwater, H., Barnes, T., Breyer, C., Burrell, A., Chiang, Y.-M., De Wolf, S., Dimmler, B., Feldman, D., Glunz, S., et al. (2019) · Science · doi:10.1126/science.aaw1845 · Cited by 560
Roy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Hybrid PV/T solar systems for domestic hot water and electricity production
Kalogirou, S. A., & Tripanagnostopoulos, Y. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.01.012 · Cited by 536
Thermal regulation of building-integrated photovoltaics using phase change materials
Huang, M. J., Eames, P., & Norton, B. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.11.015 · Cited by 525
Solar cells utilizing small molecular weight organic semiconductors
Rand, B. P., Genoe, J., Heremans, P., & Poortmans, J. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.788 · Cited by 513
The case for organic photovoltaics
Darling, S. B., & You, F. (2013) · RSC Advances · doi:10.1039/c3ra42989j · Cited by 508
Voltage Fluctuations on Distribution Level Introduced by Photovoltaic Systems
Woyte, A., Thong, V. V., Belmans, R., & Nijs, J. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.845454 · Cited by 482
Flexible CIGS, CdTe and a-Si:H based thin film solar cells: A review
Ramanujam, J., Bishop, D. M., Todorov, T. K., Gunawan, O., Rath, J., Nekovei, R., Artegiani, E., & Romeo, A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100619 · Cited by 480
System design for a solar powered electric vehicle charging station for workplaces
Chandra Mouli, G. R., Bauer, P., & Zeman, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.01.110 · Cited by 479
Comparative study of the performances of four photovoltaic/thermal solar air collectors
Hegazy, A. A. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00136-3 · Cited by 477
Hasan, A., McCormack, S. J., Huang, M. J., & Norton, B. (2010) · Solar Energy · doi:10.1016/j.solener.2010.06.010 · Cited by 476
Solar Cells: In Research and Applications—A Review
Sharma, S., Jain, K. K., & Sharma, A. (2015) · Materials Sciences and Applications · doi:10.4236/msa.2015.612113 · Cited by 475
A review of performance of zero energy buildings and energy efficiency solutions
Belussi, L., Barozzi, B., Bellazzi, A., Danza, L., Devitofrancesco, A., Fanciulli, C., Ghellere, M., Guazzi, G., Meroni, I., Salamone, F., et al. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100772 · Cited by 468
Rezaei, S. D., Shannigrahi, S., & Ramakrishna, S. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.08.026 · Cited by 459
Techno-Economic Assessment of Soiling Losses and Mitigation Strategies for Solar Power Generation
Ilse, K., Micheli, L., Figgis, B. W., Lange, K., Daßler, D., Hanifi, H., Wolfertstetter, F., Naumann, V., Hagendorf, C., Gottschalg, R., et al. (2019) · Joule · doi:10.1016/j.joule.2019.08.019 · Cited by 450
Why Superhydrophobic Surfaces Are Not Always Icephobic
Nosonovsky, M., & Hejazi, V. (2012) · ACS Nano · doi:10.1021/nn302138r · Cited by 444
Luminescent solar concentrators for building-integrated photovoltaics
Meinardi, F., Bruni, F., & Brovelli, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.72 · Cited by 441
Yan, J., Yang, Y., Elia Campana, P., & He, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0441-z · Cited by 424
Phase change materials for limiting temperature rise in building integrated photovoltaics
Huang, M. J., Eames, P., & Norton, B. (2005) · Solar Energy · doi:10.1016/j.solener.2005.10.006 · Cited by 423
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Mitigating methods of power fluctuation of photovoltaic (PV) sources – A review
Shivashankar, S., Mekhilef, S., Mokhlis, H., & Karimi, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.059 · Cited by 422
Ludin, N. A., Mustafa, N. I., Hanafiah, M. M., Ibrahim, M. A., Asri Mat Teridi, M., Sepeai, S., Zaharim, A., & Sopian, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.048 · Cited by 421
Zhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418
Photovoltaic -Thermal systems (PVT): Technology review and future trends
Joshi, S. S., & Dhoble, A. S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.067 · Cited by 412
Building-integrated photovoltaics (BIPV) in architectural design in China
Peng, C., Huang, Y., & Wu, Z. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.09.032 · Cited by 408
Ultra-thin high efficiency semitransparent perovskite solar cells
Della Gaspera, E., Peng, Y., Hou, Q., Spiccia, L., Bach, U., Jasieniak, J. J., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.028 · Cited by 390
Energy use, cost and CO2 emissions of electric cars
van Vliet, O., Brouwer, A. S., Kuramochi, T., van den Broek, M., & Faaij, A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.119 · Cited by 381
Genetic Algorithm-Based Design of the Active Damping for an LCL-Filter Three-Phase Active Rectifier
Liserre, M., Dell'Aquila, A., & Blaabjerg, F. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820540 · Cited by 370
Kavan, L., Yum, J.-H., & Grätzel, M. (2011) · Nano Letters · doi:10.1021/nl203329c · Cited by 369
Chen, K., Salinas, J., Yip, H., Huo, L., Hou, J., & Jen, A. K. ‐. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22623e · Cited by 361
From superhydrophobicity to icephobicity: forces and interaction analysis
Hejazi, V., Sobolev, K., & Nosonovsky, M. (2013) · Scientific Reports · doi:10.1038/srep02194 · Cited by 361
Ghosh, A. (2020) · Energies · doi:10.3390/en13102602 · Cited by 357
Self-citationYearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate
Hasan, A., Sarwar, J., Alnoman, H., & Abdelbaqi, S. (2017) · Solar Energy · doi:10.1016/j.solener.2017.01.070 · Cited by 351
Progress in thin film CIGS photovoltaics – Research and development, manufacturing, and applications
Feurer, T., Reinhard, P., Avancini, E., Bissig, B., Löckinger, J., Fuchs, P., Carron, R., Weiss, T. P., Perrenoud, J., Stutterheim, S., et al. (2016) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2811 · Cited by 350
Building information modelling based building energy modelling: A review
Gao, H., Koch, C., & Wu, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.032 · Cited by 349
Espinosa, N., García-Valverde, R., Urbina, A., & Krebs, F. C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.08.020 · Cited by 342
A comprehensive review on design of building integrated photovoltaic system
Shukla, A. K., Sudhakar, K., & Baredar, P. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.06.077 · Cited by 336
Enhancing the performance of building integrated photovoltaics
Norton, B., Eames, P. C., Mallick, T. K., Huang, M. J., McCormack, S. J., Mondol, J. D., & Yohanis, Y. G. (2011) · Solar Energy · doi:10.1016/j.solener.2009.10.004 · Cited by 333
Said, S. A. M., Hassan, G., Walwil, H. M., & Al-Aqeeli, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.042 · Cited by 330
Stable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Huang, M. J., Eames, P., Norton, B., & Hewitt, N. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.008 · Cited by 322
Genetic algorithm based design of the active damping for a LCL-filter three-phase active rectifier
Liserre, M., Dell'Aquila, A., & Blaabjerg, F. (2003) · Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03. · doi:10.1109/apec.2003.1179221 · Cited by 313
Jelle, B. P., Kalnæs, S. E., & Gao, T. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.03.024 · Cited by 311
Building Integrated Concentrating Photovoltaics: A review
Chemisana, D. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.017 · Cited by 305
Phase change materials for photovoltaic thermal management
Browne, M. C., Norton, B., & McCormack, S. J. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.050 · Cited by 303
Smolders, K. C. H. J., & de Kort, Y. A. W. (2014) · Journal of Environmental Psychology · doi:10.1016/j.jenvp.2013.12.010 · Cited by 303
Wang, Z., McMeekin, D. P., Sakai, N., van Reenen, S., Wojciechowski, K., Patel, J. B., Johnston, M. B., & Snaith, H. J. (2017) · Advanced Materials · doi:10.1002/adma.201604186 · Cited by 303
Agrawal, B., & Tiwari, G. N. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.06.011 · Cited by 294
Experimental investigation of a PVT system performance using nano ferrofluids
Ghadiri, M., Sardarabadi, M., Pasandideh-fard, M., & Moghadam, A. J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.077 · Cited by 287
Energy savings of office buildings by the use of semi-transparent solar cells for windows
Miyazaki, T., Akisawa, A., & Kashiwagi, T. (2005) · Renewable Energy · doi:10.1016/j.renene.2004.05.010 · Cited by 287
Optimal Energy Management for a Residential Microgrid Including a Vehicle-to-Grid System
Igualada, L., Corchero, C., Cruz-Zambrano, M., & Heredia, F.-J. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2318836 · Cited by 285
Australian renewable energy policy: Barriers and challenges
Byrnes, L., Brown, C., Foster, J., & Wagner, L. D. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.06.024 · Cited by 280
Day-Ahead Photovoltaic Forecasting: A Comparison of the Most Effective Techniques
Nespoli, A., Ogliari, E., Leva, S., Pavan, A. M., Mellit, A., Lughi, V., & Dolara, A. (2019) · Energies · doi:10.3390/en12091621 · Cited by 280
Life cycle impact analysis of cadmium in CdTe PV production
Fthenakis, V. M. (2004) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2003.12.001 · Cited by 279
Dust effect on flat surfaces – A review paper
Ghazi, S., Sayigh, A., & Ip, K. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.016 · Cited by 278
Global energy savings in offices buildings by the use of daylighting
Bodart, M., & De Herde, A. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(01)00117-7 · Cited by 276
Electric vehicles charging using photovoltaic: Status and technological review
Bhatti, A. R., Salam, Z., Aziz, M. J. B. A., Yee, K. P., & Ashique, R. H. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.091 · Cited by 267
Heat retention of a photovoltaic/thermal collector with PCM
Browne, M. C., Norton, B., & McCormack, S. J. (2016) · Solar Energy · doi:10.1016/j.solener.2016.04.024 · Cited by 250
Thermal regulation of photovoltaic cladding
Brinkworth, B. J., Cross, B. M., Marshall, R. H., & Yang, H. (1997) · Solar Energy · doi:10.1016/s0038-092x(97)00044-3 · Cited by 240
Zhang, W., Li, Q., Tang, M., Zhang, H., Sun, X., Zou, S., Jensen, J. L., Liou, T. G., & Zhou, A. (2019) · Scientific Reports · doi:10.1038/s41598-019-54552-w · Cited by 240
Coated and Printed Perovskites for Photovoltaic Applications
Howard, I. A., Abzieher, T., Hossain, I. M., Eggers, H., Schackmar, F., Ternes, S., Richards, B. S., Lemmer, U., & Paetzold, U. W. (2019) · Advanced Materials · doi:10.1002/adma.201806702 · Cited by 235
Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors
Solanki, S. C., Dubey, S., & Tiwari, A. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.03.013 · Cited by 234
Integrated thinking for photovoltaics in buildings
Ballif, C., Perret-Aebi, L.-E., Lufkin, S., & Rey, E. (2018) · Nature Energy · doi:10.1038/s41560-018-0176-2 · Cited by 234
Prakash, J. (1994) · Energy Conversion and Management · doi:10.1016/0196-8904(94)90027-2 · Cited by 232
Dust and PV Performance in Nigeria: A review
Chanchangi, Y. N., Ghosh, A., Sundaram, S., & Mallick, T. K. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109704 · Cited by 230
Self-citationStudy on thermal performance of semi-transparent building-integrated photovoltaic glazings
Fung, T. Y. Y., & Yang, H. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.03.002 · Cited by 228
A critical review on building integrated photovoltaic products and their applications
Tripathy, M., Sadhu, P. K., & Panda, S. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.008 · Cited by 217
Marcos, J., Marroyo, L., Lorenzo, E., Alvira, D., & Izco, E. (2011) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.1016 · Cited by 214
How photovoltaics can contribute to GHG emission reductions of 55% in the EU by 2030
Jäger-Waldau, A., Kougias, I., Taylor, N., & Thiel, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109836 · Cited by 211
Rejeb, O., Sardarabadi, M., Ménézo, C., Passandideh-Fard, M., Dhaou, M. H., & Jemni, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.11.063 · Cited by 208
Photovoltaic/thermal (PVT) systems: A review with emphasis on environmental issues
Lamnatou, C., & Chemisana, D. (2017) · Renewable Energy · doi:10.1016/j.renene.2016.12.009 · Cited by 207
A 10 kW Solar-Powered Bidirectional EV Charger Compatible With Chademo and COMBO
Chandra Mouli, G. R., Schijffelen, J., van den Heuvel, M., Kardolus, M., & Bauer, P. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2829211 · Cited by 207
Grid-connected isolated PV microinverters: A review
Hasan, R., Mekhilef, S., Seyedmahmoudian, M., & Horan, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.082 · Cited by 202
Calle, C. I., Buhler, C. R., McFall, J. L., & Snyder, S. J. (2009) · Journal of Electrostatics · doi:10.1016/j.elstat.2009.02.012 · Cited by 200
Review: Progress in solar cells from hydrogenated amorphous silicon
Stuckelberger, M., Biron, R., Wyrsch, N., Haug, F.-J., & Ballif, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.190 · Cited by 196
The influence of snow and ice coverage on the energy generation from photovoltaic solar cells
Andenæs, E., Jelle, B. P., Ramlo, K., Kolås, T., Selj, J., & Foss, S. E. (2017) · Solar Energy · doi:10.1016/j.solener.2017.10.078 · Cited by 196
Building information modeling for energy retrofitting – A review
Sanhudo, L., Ramos, N., Martins, J. P., Almeida, R. M. S. F., Barreira, E., Simões, M. L., & Cardoso, V. E. M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.064 · Cited by 196
Ghosh, A., & Norton, B. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.04.038 · Cited by 196
Self-citationSon, J., Kundu, S., Verma, L. K., Sakhuja, M., Danner, A. J., Bhatia, C. S., & Yang, H. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.10.011 · Cited by 194
Analysis of thermal and electrical performance of semi-transparent photovoltaic (PV) module
Park, K. E., Kang, G. H., Kim, H. I., Yu, G. J., & Kim, J. T. (2010) · Energy · doi:10.1016/j.energy.2009.07.019 · Cited by 194
Shining Light on Atmospherics: How Ambient Light Influences Food Choices
Biswas, D., Szocs, C., Chacko, R., & Wansink, B. (2017) · Journal of Marketing Research · doi:10.1509/jmr.14.0115 · Cited by 194
Jakica, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.080 · Cited by 192
Optimal sizing of array and inverter for grid-connected photovoltaic systems
Mondol, J. D., Yohanis, Y. G., & Norton, B. (2006) · Solar Energy · doi:10.1016/j.solener.2006.01.006 · Cited by 191
Lu, L., & Yang, H. X. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.06.011 · Cited by 190
Peng, J., & Lu, L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.06.030 · Cited by 188
Sorgato, M. J., Schneider, K., & Rüther, R. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.10.091 · Cited by 186
Life cycle cost assessment of building integrated photovoltaic thermal (BIPVT) systems
Agrawal, B., & Tiwari, G. N. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.017 · Cited by 184
Performance assessment of different solar photovoltaic technologies under similar outdoor conditions
Sharma, V., Kumar, A., Sastry, O. S., & Chandel, S. S. (2013) · Energy · doi:10.1016/j.energy.2013.05.068 · Cited by 182
The effects of snowfall on solar photovoltaic performance
Andrews, R. W., Pollard, A., & Pearce, J. M. (2013) · Solar Energy · doi:10.1016/j.solener.2013.02.014 · Cited by 182
Solar-to-vehicle (S2V) systems for powering commuters of the future
Birnie, D. P. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.118 · Cited by 180
An investigation of the key parameters for predicting PV soiling losses
Micheli, L., & Muller, M. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2860 · Cited by 180
Hemaida, A., Ghosh, A., Sundaram, S., & Mallick, T. K. (2019) · Solar Energy · doi:10.1016/j.solener.2019.11.024 · Cited by 179
Self-citationHybrid AC–DC Microgrids With Energy Storages and Progressive Energy Flow Tuning
Loh, P. C., Li, D., Chai, Y. K., & Blaabjerg, F. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2210445 · Cited by 175
A review of factors affecting occupant comfort in multi-unit residential buildings
Andargie, M. S., Touchie, M., & O'Brien, W. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106182 · Cited by 173
Karthick, A., Kalidasa Murugavel, K., Ghosh, A., Sudhakar, K., & Ramanan, P. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110360 · Cited by 171
Self-citationA review of PV–T systems: Thermal management and efficiency with single phase cooling
Reddy, S. R., Ebadian, M. A., & Lin, C.-X. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.134 · Cited by 169
Energy analysis of semi-transparent BIPV in Singapore buildings
Ng, P. K., Mithraratne, N., & Kua, H. W. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.07.029 · Cited by 167
Jelle, B. P. (2015) · Energies · doi:10.3390/en9010021 · Cited by 167
Can EV (electric vehicles) address Ireland’s CO2 emissions from transport?
Smith, W. J. (2010) · Energy · doi:10.1016/j.energy.2010.07.029 · Cited by 165
Parisi, M. L., Maranghi, S., & Basosi, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.079 · Cited by 165
Performance evaluation of a PV ventilated window applying to office building of Hong Kong
Chow, T. T., Fong, K. F., He, W., Lin, Z., & Chan, A. L. S. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2006.09.014 · Cited by 163
A review of icing prevention in photovoltaic devices by surface engineering
Fillion, R. M., Riahi, A. R., & Edrisy, A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.01.015 · Cited by 161
Mallick, T., Eames, P., Hyde, T. J., et al. (2004) · Solar Energy · doi:10.1016/j.solener.2004.05.015 · Cited by 161
Sun, Y., Shanks, K., Baig, H., Zhang, W., Hao, X., Li, Y., He, B., Wilson, R., Liu, H., Sundaram, S., et al. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.133 · Cited by 158
Two-Dimensional Material Interface Engineering for Efficient Perovskite Large-Area Modules
Agresti, A., Pescetelli, S., Palma, A. L., Martín-García, B., Najafi, L., Bellani, S., Moreels, I., Prato, M., Bonaccorso, F., & Di Carlo, A. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01151 · Cited by 158
Review of building integrated applications of photovoltaic and solar thermal systems
Baljit, S., Chan, H.-Y., & Sopian, K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.150 · Cited by 156
Wheeler, L. M., Moore, D. T., Ihly, R., Stanton, N. J., Miller, E. M., Tenent, R. C., Blackburn, J. L., & Neale, N. R. (2017) · Nature Communications · doi:10.1038/s41467-017-01842-4 · Cited by 156
Zarmai, M. T., Ekere, N. N., Oduoza, C. F., & Amalu, E. H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.120 · Cited by 154
Forthcoming perspectives of photoelectrochromic devices: a critical review
Cannavale, A., Cossari, P., Eperon, G. E., Colella, S., Fiorito, F., Gigli, G., Snaith, H. J., & Listorti, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01514j · Cited by 153
Luo, W., Khoo, Y. S., Kumar, A., Low, J. S. C., Li, Y., Tan, Y. S., Wang, Y., Aberle, A. G., & Ramakrishna, S. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.040 · Cited by 153
Improvement in the performance of solar collectors with nanofluids — A state-of-the-art review
Farhana, K., Kadirgama, K., Rahman, M. M., Ramasamy, D., Noor, M. M., Najafi, G., Samykano, M., & Mahamude, A. S. F. (2019) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2019.100276 · Cited by 153
Temperature Impact on Perovskite Solar Cells Under Operation
Mesquita, I., Andrade, L., & Mendes, A. M. M. (2019) · ChemSusChem · doi:10.1002/cssc.201802899 · Cited by 152
Peng, J., Curcija, D., Thanachareonkit, A., Lee, E. S., Goudey, H., & Selkowitz, S. E. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.107 · Cited by 152
Superhydrophobic surfaces with antireflection properties for solar applications: A critical review
Mehmood, U., Al‐Sulaiman, F. A., Yilbaş, B. S., Salhi, B., Ahmed, S. H. A., & Hossain, M. K. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.07.038 · Cited by 148
Modelling photovoltaic soiling losses through optical characterization
Smestad, G. P., Germer, T. A., Alrashidi, H., Férnández, E. F., Dey, S. K., Brahma, H., Sarmah, N., Ghosh, A., Sellami, N., Hassan, I. A. I., et al. (2020) · Scientific Reports · doi:10.1038/s41598-019-56868-z · Cited by 148
Self-citationInfluence of a building’s integrated-photovoltaics on heating and cooling loads
Wang, Y., Tian, W., Ren, J., Zhu, L., & Wang, Q. (2005) · Applied Energy · doi:10.1016/j.apenergy.2005.10.002 · Cited by 147
Increasing markets and decreasing package weight for high-specific-power photovoltaics
Reese, M. O., Glynn, S., Kempe, M., McGott, D. L., Dabney, M. S., Barnes, T. M., Booth, S., Feldman, D. G., & Haegel, N. M. (2018) · Nature Energy · doi:10.1038/s41560-018-0258-1 · Cited by 146
Chow, T. T., Chan, A. L. S., Fong, K. F., Lin, Z., He, W., & Ji, J. (2008) · Applied Energy · doi:10.1016/j.apenergy.2008.09.014 · Cited by 145
Solar energy materials for glazing technologies
Gorgolis, G., & Karamanis, D. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.09.040 · Cited by 145
Rafiee, M., Chandra, S., Ahmed, H. A. B., & McCormack, S. J. (2019) · Optical Materials · doi:10.1016/j.optmat.2019.01.007 · Cited by 141
Energy integration and interaction between buildings and vehicles: A state-of-the-art review
Zhou, Y., Cao, S., Hensen, J. J., & Lund, P. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109337 · Cited by 139
Status of BIPV and BAPV System for Less Energy-Hungry Building in India—A Review
Reddy, P., Gupta, M. V. N. S., Nundy, S., Karthick, A., & Ghosh, A. (2020) · Applied Sciences · doi:10.3390/app10072337 · Cited by 138
Self-citationAl-Hasan, A. Y., & Ghoneim, A. A. (2005) · International Journal of Sustainable Energy · doi:10.1080/14786450500291834 · Cited by 134
Ng, P. K., & Mithraratne, N. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.044 · Cited by 133
Vasiliev, M., Nur‐E‐Alam, M., & Alameh, K. (2019) · Energies · doi:10.3390/en12061080 · Cited by 130
Temperature effects in dye-sensitized solar cells
Raga, S. R., & Fabregat‐Santiago, F. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43220j · Cited by 127
Xie, L., Yan, H., Shuhan, Z., & Chu, W. (2019) · China Economic Review · doi:10.1016/j.chieco.2019.101374 · Cited by 127
Hanaei, H., Assadi, M. K., & Saidur, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.017 · Cited by 124
Net energy and cost benefit of transparent organic solar cells in building-integrated applications
Anctil, A., Lee, E., & Lunt, R. R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114429 · Cited by 121
Large area perovskite solar cell module
Cai, L., Liang, L., Wu, J., Ding, B., Gao, L., & Fan, B. (2017) · Journal of Semiconductors · doi:10.1088/1674-4926/38/1/014006 · Cited by 119
Thermal performance investigation of heat insulation solar glass: A comparative experimental study
Cüce, E., Young, C.-H., & Riffat, S. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.10.063 · Cited by 118
Kim, A., Lee, C., Kim, H., & Kim, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00292 · Cited by 117
Progress in hole-transporting materials for perovskite solar cells
Yang, X., Wang, H., Cai, B., Yu, Z., & Sun, L. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.12.017 · Cited by 117
Ghosh, A., & Mallick, T. K. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.10.026 · Cited by 116
Self-citationGhosh, A., Selvaraj, P., Sundaram, S., & Mallick, T. K. (2018) · Solar Energy · doi:10.1016/j.solener.2018.02.021 · Cited by 116
Self-citationStand-alone photovoltaic-powered electrochromic smart window
Deb, S. K., Lee, S.-H., Tracy, C. E., Pitts, J. R., Gregg, B. A., & Branz, H. M. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00390-5 · Cited by 115
Saifullah, M., Gwak, J., & Yun, J. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01016d · Cited by 115
Cannavale, A., Hörantner, M. T., Eperon, G. E., Snaith, H. J., Fiorito, F., Ayr, U., & Martellotta, F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.011 · Cited by 115
Measured overall heat transfer coefficient of a suspended particle device switchable glazing
Ghosh, A., Norton, B., & Duffy, A. P. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.09.019 · Cited by 114
Self-citationEnhancing the efficiency of transparent dye-sensitized solar cells using concentrated light
Selvaraj, P., Baig, H., Mallick, T. K., Siviter, J., Montecucco, A., Li, W., Paul, M. C., Sweet, T., Gao, M., Knox, A. R., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.10.006 · Cited by 114
Jelle, B. P. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.010 · Cited by 113
Bakos, G. C., Soursos, M., & Tsagas, N. F. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(02)00229-3 · Cited by 113
Enhanced quantum dot emission for luminescent solar concentrators using plasmonic interaction
Chandra, S., Doran, J. M., McCormack, S. J., Kennedy, M., & Chatten, A. J. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.11.030 · Cited by 112
Williams, A. M., Phaneuf, D. J., Barrett, M., & Su, J. G. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1805647115 · Cited by 111
Taveres-Cachat, E., Grynning, S., Thomsen, J., & Selkowitz, S. E. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.12.045 · Cited by 111
Urbanization, urbanicity, and depression: a review of the recent global literature
Sampson, L., Ettman, C. K., & Galea, S. (2020) · Current Opinion in Psychiatry · doi:10.1097/yco.0000000000000588 · Cited by 111
Borrebæk, P.-O. A., Jelle, B. P., & Zhang, Z. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110306 · Cited by 109
Life Cycle Assessment of a Building Integrated Concentrated Photovoltaic scheme
Menoufi, K., Chemisana, D., & Rosell, J. I. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.037 · Cited by 108
Shamshirband, M., Salehi, J., & Gazijahani, F. S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.315 · Cited by 108
Day charging electric vehicles with excess solar electricity for a sustainable energy system
Nunes, P., Farias, T. L., & Brito, M. C. (2014) · Energy · doi:10.1016/j.energy.2014.11.069 · Cited by 106
Combining photovoltaic energy with electric vehicles, smart charging and vehicle-to-grid
Fattori, F., Anglani, N., & Muliere, G. (2014) · Solar Energy · doi:10.1016/j.solener.2014.09.034 · Cited by 105
Li, X., Lopes, L. A. C., & Williamson, S. S. (2009) · IEEE Power & Energy Society General Meeting (PESGM) · doi:10.1109/pes.2009.5275171 · Cited by 104
Goossens, D., Offer, Z. Y., & Zangvil, A. (1993) · Solar Energy · doi:10.1016/0038-092x(93)90009-d · Cited by 103
Site dependence of the energy collection of PV modules
Bücher, K. (1997) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(97)00028-7 · Cited by 102
Mid-infrared emissivity of crystalline silicon solar cells
Riverola, A., Mellor, A. V., Alonso‐Álvarez, D., Llin, L. F., Guarracino, I., Markides, C. N., Paul, D. J., Chemisana, D., & Ekins‐Daukes, N. J. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.10.002 · Cited by 102
Cited by
Chandran, V., Patil, C. K., Karthick, A., Ganeshaperumal, D., Rahim, R., & Ghosh, A. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12010038 · Cited by 354
Self-citationNundy, S., Ghosh, A., Mesloub, A., Albaqawy, G. A., & Alnaim, M. M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127705 · Cited by 301
Self-citationPasupathi, M. K., Alagar, K., P, M. J. S., M.M, M., & Aritra, G. (2020) · Energies · doi:10.3390/en13195079 · Cited by 171
“Recently, several works have been carried out by a quite a few researchers to address this problem by integrating the solar thermal systems with suitable thermal energy storage material [3].”
BackgroundSelf-citation
Metadata
- Authors
- Ghosh, A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 276
- Pages
- 123343
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3048149628
- Cited by
- 332
- References
- 300
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.