Perspective of dimethyl ether as fuel: Part I. Catalysis
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Dimethyl ether (DME) is heralded as the cleanest high-efficiency compression ignition fuel as a substitute for diesel. DME's autoignition property and high octane number are favorable to use it as a substitute for diesel and also LPG as a cooking fuel. DME can be synthesized from different routes such as coal, petroleum and biomass including various greenhouse gases. Huge amounts of greenhouse gases (CO and CO2) are generated in coal or petroleum operated thermal power plants and released in the atmosphere. Roughly 5–10% of total CO2 emission can be utilized for fuel and chemical production. CO2 capture and sequestering (CCS) plants only can be sustainable if supported by DME synthesis plant with a capacity of 3000–7500 TPD. DME can be produced from CO2 using innovative catalysts, reactors and separators. Part I of this review is a representation of the innovative strategies which have been reported for the production of DME from different sources of raw materials, catalysts and influence of operational parameters on DME selectivity and yield. The critical gaps are identified and further, research potentials are given in Part I. However, the industrial processes using a variety of reactor configurations affect the overall capex and opex. The production of syngas, irrespective of the source, is the first step in DME synthesis, which is then followed by conversion into DME using a battery of reactors and separators. A critical analysis is presented and future scope is outlined in Part II.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances in catalytic hydrogenation of carbon dioxide
Wang, W., Wang, S., Ma, X., & Gong, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15008a · Cited by 3,316
The Mechanism of Dimethyl Ether Formation from Methanol Catalyzed by Zeolitic Protons
Blaszkowski, S. R., & van Santen, R. A. (1996) · Journal of the American Chemical Society · doi:10.1021/ja954323k · Cited by 227
Catalytic consequences of acid strength in the conversion of methanol to dimethyl ether
Carr, R. T., Neurock, M., & Iglesia, E. (2011) · Journal of Catalysis · doi:10.1016/j.jcat.2010.11.017 · Cited by 203
Jin, D., Zhu, B., Hou, Z., Fei, J., Lou, H., & Zheng, X. (2007) · Fuel · doi:10.1016/j.fuel.2007.03.011 · Cited by 165
Methanol to Dimethyl Ether over ZSM-22: A Periodic Density Functional Theory Study
Moses, P. G., & Nørskov, J. K. (2013) · ACS Catalysis · doi:10.1021/cs300722w · Cited by 94
Cited by
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
Awogbemi, O., Kallon, D. V. V., Onuh, E. I., & Aigbodion, V. S. (2021) · Energies · doi:10.3390/en14185687 · Cited by 145
“Also, DME has lower lubricity, resulting in increased wear of moving parts; lower viscosity, which can cause leakages in fuel pumps and fuel injectors; and higher flammability limits than PBD fuel [174,237,240].”
BackgroundDehydration of Methanol to Dimethyl Ether—Current State and Perspectives
Chmielarz, L. (2024) · Catalysts · doi:10.3390/catal14050308 · Cited by 33
Direct CO2 Hydrogenation over Bifunctional Catalysts to Produce Dimethyl Ether—A Review
Ebrahimian, S., & Bhattacharya, S. (2024) · Energies · doi:10.3390/en17153701 · Cited by 13
Metadata
- Authors
- Mondal, U., & Yadav, G. D.
- Venue
- Journal of CO2 Utilization
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 32
- Pages
- 299-320
- ISSN
- 2212-9820 (ISSN-L)
- OpenAlex
- W2942459185
- Cited by
- 133
- References
- 5
- FWCI
- 3.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Perspective of dimethyl ether as fuel: Part I. Catalysis. https://app.cochat.ai/papers/10.1016/j.jcou.2019.02.003
- The paper
- Mondal, U., & Yadav, G. D. (2019). Perspective of dimethyl ether as fuel: Part I. Catalysis. Journal of CO2 Utilization. https://doi.org/10.1016/j.jcou.2019.02.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.