The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Structural design of stainless steel concrete filled columns
Open accessAbstract
a b s t r a c t This paper presents the behaviour and design of axially loaded concrete filled stainless steel circular and square hollow sections. The experimental investigation was conducted using different concrete cube strengths varied from 30 to 100 MPa. The column strengths and load-axial shortening curves were evaluated. The study is limited to cross-section capacity and has not been validated at member level. Comparisons of the tests results together with other available results from the literature have been made with existing design methods for composite carbon steel sections — Eurocode 4 and ACI. It was found that existing design guidance for carbon steel may generally be safely applied to concrete filled stainless steel tubes, though it tends to be over-conservative. A continuous strength method is proposed and it is found to provide the most accurate and consistent prediction of the axial capacity of the composite concrete filled stainless steel hollow sections due largely to the more precise assessment of the contribution of the stainless steel tube to the composite resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chung, K. F., & Narayanan, R. G. (1994) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 1,132
Full-range stress–strain curves for stainless steel alloys
Rasmussen, K. J. R. (2003) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(02)00018-4 · Cited by 989
Axially Loaded Concrete-Filled Steel Tubes
Schneider, S. P. (1998) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1998)124:10(1125 · Cited by 816
Axial capacity of circular concrete-filled tube columns
Giakoumelis, G., & Lam, D. (2004) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2003.10.001 · Cited by 638
Self-citationMirambell, E., & Real, E. (2000) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(99)00051-6 · Cited by 550
The use of stainless steel in structures
Gardner, L. (2005) · Progress in Structural Engineering and Materials · doi:10.1002/pse.190 · Cited by 496
Self-citationExperiments on stainless steel hollow sections—Part 1: Material and cross-sectional behaviour
Gardner, L., & Nethercot, D. A. (2004) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2003.11.006 · Cited by 472
Self-citationState of the art report on steel–concrete composite columns
Shanmugam, N. E., & Lakshmi, B. (2001) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(01)00021-9 · Cited by 466
Tests on stub columns of concrete-filled RHS sections
Han, L. (2002) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(01)00059-1 · Cited by 448
Design of Circular Thin-Walled Concrete Filled Steel Tubes
O'Shea, M. D., & Bridge, R. Q. (2000) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2000)126:11(1295 · Cited by 433
Strength of short concrete filled high strength steel box columns
Uy, B. (2001) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(00)00014-6 · Cited by 425
Numerical Modeling of Stainless Steel Structural Components—A Consistent Approach
Gardner, L., & Nethercot, D. A. (2004) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2004)130:10(1586 · Cited by 410
Self-citationStructural design for non-linear metallic materials
Gardner, L., & Ashraf, M. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.11.001 · Cited by 345
Self-citationSpecification for the Design of Cold-Formed Stainless Steel Structural Members
American Society of Civil Engineers (2002) · American Society of Civil Engineers eBooks · doi:10.1061/9780784405567 · Cited by 319
Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns
Young, B., & Ellobody, E. (2006) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2005.08.004 · Cited by 287
Local and post-local buckling of concrete filled steel welded box columns
Uy, B. (1998) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(98)80102-8 · Cited by 252
Design of Cold‐Formed Stainless Steel Tubular Members. II: Beams
Rasmussen, K. J. R., & Hancock, G. J. (1993) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1993)119:8(2368 · Cited by 236
Design of Cold‐Formed Stainless Steel Tubular Members. I: Columns
Rasmussen, K. J. R., & Hancock, G. J. (1993) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1993)119:8(2349 · Cited by 232
Han, L.-H., & Yao, G.-H. (2004) · Thin-Walled Structures · doi:10.1016/j.tws.2004.03.016 · Cited by 220
Design and behaviour of concrete-filled cold-formed stainless steel tube columns
Ellobody, E. A. E. F., & Young, B. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.09.023 · Cited by 196
Discrete and continuous treatment of local buckling in stainless steel elements
Gardner, L., & Theofanous, M. (2008) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2008.07.003 · Cited by 159
Self-citationStructural performance of cold-formed high strength stainless steel columns
Ellobody, E. A. E. F., & Young, B. (2005) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2005.05.001 · Cited by 146
Structural design of high-strength austenitic stainless steel
Gardner, L., Talja, A., & Baddoo, N. (2006) · Thin-Walled Structures · doi:10.1016/j.tws.2006.04.014 · Cited by 140
Self-citationCompression Tests of Stainless Steel Tubular Members
Young, B., & Hartono, W. (2002) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2002)128:6(754 · Cited by 115
Hollow structural section connections and trusses : a design guide
Packer, J. A., & Henderson, J. E. (1997) · Medical Entomology and Zoology · Cited by 106
Static Long-Term Effects in Short Concrete-Filled Steel Box Columns under Sustained Loading
Uy, B. (2001) · ACI Structural Journal · doi:10.14359/10151 · Cited by 105
Experimental study on concrete filled square hollow sections
Lam, D., & Williams, C. A. (2004) · Steel and Composite Structures · doi:10.12989/scs.2004.4.2.095 · Cited by 73
Self-citationConcrete‐filled fabricated steel box columns for multistorey buildings: behaviour and design
Uy, B. (1998) · Progress in Structural Engineering and Materials · doi:10.1002/pse.2260010207 · Cited by 71
Life-cycle costing of metallic structures
Gardner, L., Cruise, R. B., Sok, C. P., Krishnan, K., & Santos, J. M. D. (2007) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/ensu.2007.160.4.167 · Cited by 64
Self-citationHan, L., & Yang, Y.-F. (2001) · Advances in Structural Engineering · doi:10.1260/1369433011502381 · Cited by 30
Cited by
Behaviour of short and slender concrete-filled stainless steel tubular columns
Uy, B., Tao, Z., & Han, L.-H. (2011) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2010.10.004 · Cited by 462
Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression
Tao, Z., Uy, B., Liao, F.-Y., & Han, L.-H. (2011) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2011.04.012 · Cited by 282
Han, L.-H., Xu, C.-Y., & Tao, Z. (2019) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2018.02.038 · Cited by 193
Axial capacity and ductility of circular UHPC-filled steel tube columns
Guler, S., Çopur, A., & Aydogan, M. (2013) · Magazine of Concrete Research · doi:10.1680/macr.12.00211 · Cited by 111
Compressive strength of concrete-filled stainless steel tube stub columns
Dai, P., Yang, L., Wang, J., & Zhou, Y. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2019.110106 · Cited by 92
“The 5% strain for 304 specimens was defined according to a previous study [12] where the results showed that the 304 CFSST specimens generally reached their ultimate loads at end-shortenings approximately 5% of the specimen length or less.”
Metadata
- Authors
- Lam, D., & Gardner, L.
- Venue
- Journal of Constructional Steel Research
- Publisher
- Elsevier BV
- Published
- 2008-11
- Volume
- 64
- Issue
- 11
- Pages
- 1275-1282
- ISSN
- 0143-974X (ISSN-L)
- OpenAlex
- W2124162027
- Cited by
- 327
- References
- 30
- FWCI
- 17.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.