Synthesis of carbon nanotubes using biochar as precursor material under microwave irradiation
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Biochar is a carbon-rich porous material obtained by the thermochemical treatment of biomass. Biochar presents a suitable composition as precursor material for carbon nanotubes (CNTs) growth, and can be used as a sustainable alternative in the valorization of biomass. In this study, the synthesis of CNTs using biochar as biological precursor material is presented. CNTs were synthesized using a mixture of biochar and ferrocene including microwave assisted heating. Biochar samples used in the synthesis of CNTs were obtained from agroindustrial waste such as wheat straw, oat hulls, rapeseed cake and hazelnut hulls pyrolyzed at 400 °C and 600 °C. Synthesized CNTs were examined by dynamic light scattering, UV-VIS spectroscopy, Raman spectroscopy and transmission electron microscopy. The results indicate that the physicochemical properties of CNTs were influenced by pyrolysis temperature of biomass. Biochars obtained at 600 °C produced higher CNTs concentration and smaller hydrodynamic diameter. Moreover, CNTs synthesized from biochar of hazelnut hulls and wheat straw show a higher degree of wall graphitization, suggesting superior CNT quality. The results of this study show the feasible production of CNTs using biochar as precursor material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357
Ronsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000
Influence of feedstock source and pyrolysis temperature on biochar bulk and surface properties
Suliman, W., Harsh, J. B., Abu-Lail, N. I., Fortuna, A.-M., Dallmeyer, I., & Garcia-Perez, M. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.11.010 · Cited by 585
Zhao, S.-X., Ta, N., & Wang, X.-D. (2017) · Energies · doi:10.3390/en10091293 · Cited by 585
The effect of pyrolysis conditions on biochar stability as determined by three methods
Crombie, K., Mašek, O., Sohi, S. P., Brownsort, P., & Cross, A. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12030 · Cited by 533
Kim, W.-K., Shim, T., Kim, Y.-S., Hyun, S., Ryu, C., Park, Y.-K., & Jung, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.186 · Cited by 366
Xiao, X., Chen, Z., & Chen, B. (2016) · Scientific Reports · doi:10.1038/srep22644 · Cited by 309
Cited by
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Biomass derived functional carbon materials for supercapacitor applications
Rawat, S., Mishra, R. K., & Bhaskar, T. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131961 · Cited by 296
Hoang, A. T., Nižetić, S., Cheng, C. K., Luque, R., Thomas, S., Banh, T. L., Pham, V. V., & Nguyen, X. P. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131959 · Cited by 277
Meng, H., Nie, C., Li, W., Duan, X., Lai, B., Ao, Z., Wang, S., & An, T. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123043 · Cited by 259
Using sewage sludge with high ash content for biochar production and Cu (II) sorption
Fan, J., Li, Y., Yu, H., Li, Y., Yuan, Q., Xiao, H., Li, F., & Pan, B. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.136663 · Cited by 156
Metadata
- Authors
- Hidalgo, P., Navia, R., Hunter, R., Coronado, G., & Gonzalez, M.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 244
- Pages
- 83-91
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2946432683
- Cited by
- 111
- References
- 8
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.