The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Advances in Mg corrosion and research suggestions
Open accessAbstract
Recent research is summarised with an emphasis on the use of Mg alloys for biodegradable medical applications. Mg melt purification using Zr has been shown to provide the opportunity to produce ultra-high-purity Mg alloys, which could lead to stainless Mg. Nor's solution may be a good starting model for the study of Mg for biodegradable medical implant applications. A systematic laboratory investigation is needed to elucidate the details of how the corrosion behaviour is controlled by the various constituents of the body fluids. In the evaluation of the Mg corrosion mechanism there is a critical lack of understanding of (i) the amount of hydrogen dissolved in the Mg metal during corrosion, and during anodic polarisation, and (ii) the size film-free area where corrosion occurs, and how to measure this area. In the evaluation of the apparent valence of Mg using an applied anodic current density, for reliable values, it is important to apply a sufficiently large applied current density. The available data are consistent with the slightly modified uni-positive Mg+ ion mechanism, which maintains that (i) the surface of Mg is covered by a partially protective film, and the film-free area increases as the potential becomes more positive (i.e. a catalytic activation process), (ii) corrosion occurs preferentially at breaks in the partial protective film, (iii) corrosion at the breaks in the partially protective film involves the uni-positive Mg ion, (iv) undermining of particles occurs when Mg is severely dissolved, and (v) there may be some self-corrosion not covered by these four processes, which may be associated with crevice-like features on a severely corroded surface or hydride dissolution at relatively negative potentials. Self-corrosion might also be possible under condition of essentially uniform corrosion. Mg+ has not been experimentally observed. Its existence is postulated as an extremely-short lifetime intermediate in the reaction sequence between metallic Mg and the equilibrium ion Mg++. There has been no direct experimental examination of this sequence, and a key challenge remains to devise an experimental approach to study the details of this reaction sequence and the intermediate steps. The apparent valence of Mg continues to be a critical question. If defendable values of effective valence for Mg less than 1.0 were measured, this would indicate that some phenomena contribute to these low values that are not currently accounted for in the uni-positive Mg+ corrosion mechanism. The most likely candidate would be self-corrosion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles and prevention of corrosion
Walker, R. (1993) · Materials & Design · doi:10.1016/0261-3069(93)90066-5 · Cited by 2,427
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Self-citationPrinciples and prevention of corrosion
Jones, D. A. (1991) · Cited by 2,104
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
Song, G., & Atrens, A. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310405 · Cited by 2,056
Self-citationControl of biodegradation of biocompatable magnesium alloys
Song, G. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.01.001 · Cited by 1,514
Self-citationMeasurement of the corrosion rate of magnesium alloys using Tafel extrapolation
Shi, Z., Liu, M., & Atrens, A. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.10.016 · Cited by 1,029
Self-citationThe anodic dissolution of magnesium in chloride and sulphate solutions
Song, G., Atrens, A., John, D. S., Wu, X., & Nairn, J. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00090-5 · Cited by 890
Self-citationKirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
The electrochemical corrosion of pure magnesium in 1 N NaCl
Song, G., Atrens, A., Stjohn, D., Nairn, J., & Li, Y. (1997) · Corrosion Science · doi:10.1016/s0010-938x(96)00172-2 · Cited by 614
Self-citationA Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
Self-citationAn innovative specimen configuration for the study of Mg corrosion
Shi, Z., & Atrens, A. (2011) · Corrosion Science · doi:10.1016/j.corsci.2010.09.016 · Cited by 469
Self-citationEvolution of hydrogen at dissolving magnesium surfaces
Frankel, G. S., Samaniego, A., & Birbilis, N. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.01.017 · Cited by 403
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
Cao, F., Shi, Z., Hofstetter, J., Uggowitzer, P. J., Song, G., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.05.018 · Cited by 371
Self-citationCao, F., Shi, Z., Song, G.-L., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.030 · Cited by 267
Self-citationCorrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C
Zainal Abidin, N. I., Atrens, A. D., Martin, D., & Atrens, A. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.06.030 · Cited by 227
Self-citationMagnesium alloys: Predicting in vivo corrosion with in vitro immersion testing
Walker, J., Shadanbaz, S., Kirkland, N. T., Stace, E., Woodfield, T., Staiger, M. P., & Dias, G. J. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32680 · Cited by 223
The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91
Zainal Abidin, N. I., Rolfe, B., Owen, H., Malisano, J., Martin, D., Hofstetter, J., Uggowitzer, P. J., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.019 · Cited by 218
Self-citationQiao, Z., Shi, Z., Hort, N., Zainal Abidin, N. I., & Atrens, A. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.030 · Cited by 199
Self-citationBurstein, G. T., & Daymond, B. T. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.07.010 · Cited by 67
Production of High Purity Magnesium Alloys by Melt Purification with Zr
Prasad, A., Uggowitzer, P. J., Shi, Z., & Atrens, A. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200054 · Cited by 66
Self-citation
Cited by
Review of Recent Developments in the Field of Magnesium Corrosion
Atrens, A., Song, G., Liu, M., Shi, Z., Cao, F., & Dargusch, M. S. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400434 · Cited by 806
Self-citationThe role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Advances in functionalized polymer coatings on biodegradable magnesium alloys–A review
Li, L.-Y., Cui, L.-Y., Zeng, R.-C., Li, S.-Q., Chen, X.-B., Zheng, Y., & Kannan, M. B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.030 · Cited by 466
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Advances in coatings on biodegradable magnesium alloys
Yin, Z.-Z., Qi, W.-C., Zeng, R.-C., Chen, X.-B., Gu, C.-D., Guan, S.-K., & Zheng, Y.-F. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2019.09.008 · Cited by 419
Metadata
- Authors
- Atrens, A., Song, G.-L., Cao, F., Shi, Z., & Bowen, P. K.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2013-09
- Volume
- 1
- Issue
- 3
- Pages
- 177-200
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W2040490539
- Cited by
- 495
- References
- 20
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.